DIODE DYNAMICS · 2017–2025 CAN-AM MAVERICK X3
Compact SS10 light. A dedicated shock mount.
One SS10 bar mounts at the Maverick X3’s factory shock-mount location, with a stainless-steel bracket and matched single-output harness. Choose Sport, Pro or Max with White/Yellow and Driving/Combo.
- One SS10 barSport / Pro / Max
- Shock-mount bracketFactory hardware location
- 12 exact choicesColour, optic and output
- Harness includedPlan cabin wiring access

PURPOSEFUL LIGHTING
A kit built around the job
A compact forward-lighting location
The bracket places an SS10 at the factory shock-mount points, using the documented mounting hardware.
Three output levels
Sport, Pro and Max share the same kit layout; choose the output tier and optic that fit the way you use the vehicle.
Colour-specific accents
White bars offer eight accent colours and a startup sequence except in Amber mode. Yellow bars have Amber-only backlights without a startup sequence.

CHECK THE VEHICLE FIRST
Exact fitment and mounting
| Check | This kit |
|---|---|
| Vehicle | 2017–2025 Can-Am Maverick X3 |
| Mounting | Factory shock-mount arrangement |
| Aftermarket shock mounts | May affect fit; confirm before ordering |
| Lamp | One SS10 Standard in the selected tier/colour/optic |
| Access required | Passenger seat/console and front hood per guide |
MATCH THE SKU TO YOUR SELECTION
Choose the light for the job
| Kit SKU | Output | Colour | Pattern / function |
|---|---|---|---|
| DD8296 | Max | White | Combo |
| DD8315 | Max | White | Driving |
| DD8316 | Max | Yellow | Driving |
| DD8293 | Sport | Yellow | Combo |
| DD8294 | Pro | White | Combo |
| DD8312 | Sport | Yellow | Driving |
| DD8313 | Pro | White | Driving |
| DD8314 | Pro | Yellow | Driving |
| DD8295 | Pro | Yellow | Combo |
| DD8292 | Sport | White | Combo |
| DD8311 | Sport | White | Driving |
| DD8297 | Max | Yellow | Combo |
Select the exact tier, main-beam colour and pattern in the native options above. The table identifies the supplied kit SKU. Other lighting on photographed vehicles is separate.
WHAT THE KIT SUPPLIES
The parts belong together

- One SS10 Standard bar in the selected configuration
- DD8291P stainless-steel shock-mount bracket kit
- DD4104 heavy-duty single-output 4-pin harness
- Mounting hardware and installation guide
Only the listed kit contents are supplied. Other vehicle lighting, grilles, winches and accessories shown in installed photographs are separate.
MOUNT · WIRE · AIM
Plan the installation before you begin
Open the BTS illustrated installation guide
Follow the guide for passenger-seat and console access to the bus bar, relay and switch route. Remove the hood and route the DT lead through the specified firewall/access path. Reuse the factory hardware to fit the shock-mount bracket, then attach the SS10 with its connector oriented as shown. Test the switch, aim the bar, secure wiring and reinstall the removed panels and seat.
Read the official installation guide
A bolt-on bracket does not remove the wiring/access work. The written guide includes seat and console removal plus firewall routing. Have a qualified installer handle unfamiliar vehicle electrical or restraint-system work.
UNDERSTAND THE EXACT HARDWARE
Technical specifications
| Detail | This kit |
|---|---|
| Lamp | One SS10 Standard bar |
| Output tiers | Sport / Pro / Max |
| Main beam | 6000 K White or 3000 K Yellow |
| Optics | Driving or Combo |
| White accents | Eight colours; startup except Amber |
| Yellow accents | Amber only; no startup |
| Operating voltage | 9–30 V |
| Power | Sport 40 W; Pro 51.5 W; Max 61 W |
| Protection | Manufacturer-rated IP69K |
Output by option
| Option | Choose it for | What changes |
|---|---|---|
| Sport | Efficient compact forward lighting | 40 W manufacturer input specification |
| Pro | A higher-output step | 51.5 W manufacturer input specification |
| Max | Highest tier on this listing | 61 W manufacturer input specification |
Specifications and output photographs apply only to the identified lamp, optic and colour. No combined-kit lumen total is claimed.
Manufacturer warranty
The light-bar assembly carries Diode Dynamics’ limited lifetime warranty for personal use. Off-road mounting brackets also qualify for limited lifetime coverage. Wiring, harnesses and other accessories have separate 3-year coverage. Commercial, industrial and fleet use limits otherwise lifetime-covered parts to 8 years. Proof of purchase and return authorization are required; manufacturer exclusions and shipping terms apply. See the manufacturer warranty terms.
OFFICIAL DIODE DYNAMICS VIDEOS
See the installation and understand the light
Load a video when you are ready. No autoplay or video download is required to read this page.
Lumens, Lux, and Candela EXPLAINED | Diode Dynamics
General output terminology; not an exact-kit output test.
CLEAR ANSWERS
Before you order
Will this fit aftermarket shock mounts?
Do not assume it will. The manufacturer specifically warns that aftermarket shock mounts can affect bracket installation.
Does Yellow have the White bar’s colour-changing accents?
No. Yellow bars have Amber-only accents and no startup sequence. The eight-colour feature belongs to White bars.
What warranty applies?
Limited lifetime coverage applies to the light-bar assembly and eligible off-road brackets for personal use. Wiring and accessories carry separate 3-year coverage. Commercial, industrial and fleet use is limited to 8 years for otherwise lifetime-covered parts. Manufacturer terms apply.
Are the kit photographs extra items I need to buy?
The listed kit contents are supplied. Other vehicle lighting and accessories in installation photographs are separate. Select the exact kit SKU and follow the notes under each photograph.




























