DIODE DYNAMICS · RZR Pro XP / Turbo R / Pro R
Trail light at the RZR Pro’s shoulders.
Position two SS3 Combo pods at the A-pillars with brackets made for the supported RZR Pro models. The kit brings the pods, application brackets and dual-output wiring together, with four exact White/Yellow and Sport/Pro configurations.
- 2 podsSS3 Combo
- Sport / ProChoose your output
- White / YellowSelect the main beam
- Wiring includedComplete kit
PURPOSEFUL LIGHTING
A kit built around the job
Hardware made for the mounting point
Application-specific brackets use the mounting locations identified in the installation guide. Review roof, windshield, cage and model restrictions before ordering.
A purposeful Combo beam
Combo optics balance forward reach and nearby coverage for off-road use. Aim the lights for your route and keep other road users in mind.
A separate accent function
The SS3 pods have amber accent backlights. White or Yellow refers to the selected main beam, not a colour-changing light.

CHECK THE VEHICLE FIRST
Exact fitment and mounting
| Check | This kit |
|---|---|
| Vehicle / years | 2020–2023 RZR Pro XP: Sport, Premium, Ultimate; 2022–2023 Turbo R: Sport, Premium, Ultimate; 2022–2023 Pro R: Premium, Ultimate, Troy Lee Designs |
| Supplied lights | Two SS3 Combo pods |
| Main-beam choices | White or selective Yellow; Sport or Pro output level |
| Windshield restriction | Not compatible with windshield kits. |
| Installation modification | A slot must be cut in each rubber A-pillar boot. Mounting the round switch can also require drilling a switch blank. |
| Accent lighting | Fixed amber accent backlight; the main beam remains White or Yellow according to the selected SKU. |
MATCH THE SKU TO YOUR SELECTION
Choose your configuration
| Kit SKU | Output | Colour | Pattern / function |
|---|---|---|---|
| DD7635 | Sport | White | Combo |
| DD7636 | Sport | Yellow | Combo |
| DD7637 | Pro | White | Combo |
| DD7638 | Pro | Yellow | Combo |
Use the choices above to select your kit. The SKU table identifies the configuration supplied with each selection.

WHAT THE KIT SUPPLIES
The parts belong together

- Two SS3 Combo pods in the selected output level and colour
- DD7634P application-specific A-pillar mounting brackets
- Heavy Duty dual-output 4-pin wiring harness
- Pod brackets, hardware and installation guide
Match your selected SKU to the kit table. Vehicle accessories and additional lights shown in installation photographs are not included. Supplier photos can show earlier lens styles; current exact kit views are labelled in the gallery.

MOUNT · WIRE · AIM
Plan the installation before the trail
Illustrated BTS installation guide
All vehicle steps, original technical photographs and separate SS3 / SS5 instructions in one guide.
Access the battery beneath the driver seat and route the harness through the center-console and dash areas. The guide requires a slot in each rubber A-pillar boot before installing the brackets at the factory 18 mm cage bolts. Fit the supplied spacers/washers and pod hardware, aim both lights and secure the wiring clear of the shifter and pedals. The included round switch can be fitted by drilling an approximately 20.5 mm switch-blank hole; follow the guide if using a different switch arrangement. This kit is not compatible with windshield kits.
Read the official installation guide
UNDERSTAND THE EXACT HARDWARE
Technical specifications
| Detail | This kit |
|---|---|
| Quantity | Two SS3 pods |
| Main beam | Combo; fixed 6000 K White or 3000 K selective Yellow by SKU |
| Output options | Sport or Pro; choose the complete kit SKU above |
| Accent light | The SS3 pods have amber accent backlights. White or Yellow refers to the selected main beam, not a colour-changing light. |
| Operating voltage | 9–16 V DC for this supplied kit configuration; polarity specific |
| Pod housing / lens | Aluminum casting, polycarbonate lens and rubber gasket |
| Connector / driver | Deutsch DT input; constant-current LED driver |
| Cooling | Passive pin-fin heatsink |
| Temperature range | −40°C to 85°C |
| Ingress rating | IP69K |
| Use | Off-road auxiliary lighting. SAE J575 is durability testing, not blanket road-use approval. |
Output by option
| Configuration | Main beam | Accent backlight |
|---|---|---|
| White Sport | White main beam | Amber |
| Yellow Sport | Yellow main beam | Amber |
| White Pro | White main beam | Amber |
| Yellow Pro | Yellow main beam | Amber |
The four options are fixed kit configurations. Manufacturer photographs are illustrative, not calibrated comparisons. Output measurements are not inferred from photographs or from other pod generations.
Diode Dynamics provides a limited lifetime warranty for this product for eligible purchases from April 15, 2025. Commercial, industrial and fleet use is limited to 8 years. After the first 3 years, covered products require return for inspection and repair or replacement at the manufacturer’s discretion. Coverage applies to the specified lamp or component; bundled wiring and accessories follow their own published terms. Keep proof of purchase. Manufacturer approval and an RMA are required before return; labor and normal wear are excluded. Shipping obligations vary by location. See the manufacturer warranty terms for eligibility, exclusions and claim instructions.
OFFICIAL DIODE DYNAMICS VIDEOS
See the installation and understand the light
Load a video when you are ready. No autoplay or video download is required to read this page.
RZR Pro A-pillar kit installation
Use this with the exact written guide. Follow the kit-specific trimming, wiring and aiming instructions; switch mounting can require drilling.
TIR Optics | Stage Series by Diode Dynamics
General TIR optics explanation; specifications depend on the selected pod.
Lumens, Lux, and Candela EXPLAINED | Diode Dynamics
General light-output terminology; not an exact-kit measured test.
CLEAR ANSWERS
Before you order
Are lights and wiring included?
Yes. This is the complete SS3 A-pillar kit, with the lamps, application mounting hardware and harness listed above. Other lighting shown on the vehicle is separate.
Can I change the main light from White to Yellow with a switch?
No. Choose White or Yellow when ordering. The accent backlight is a separate function from the main beam.
What changes between Sport and Pro?
Sport and Pro use the same vehicle mounting arrangement and beam family, with different output levels. The kit SKU fixes the selected configuration.
How does the backlight work?
The SS3 pods have amber accent backlights. White or Yellow refers to the selected main beam, not a colour-changing light.
Will it work with my windshield?
The manufacturer excludes windshield kits for these A-pillar brackets. Confirm a different mounting solution before ordering if your RZR has a windshield.
Is it a completely no-cut installation?
No. The factory mounting bolts are reused, but the guide calls for slots in the rubber A-pillar boots. Installing the included round toggle can also require drilling a switch blank.
What warranty applies?
Eligible Stage Series lamps and off-road brackets have a manufacturer limited lifetime warranty for qualifying purchases from April 15, 2025. Commercial, industrial and fleet use is limited to eight years. Wiring and other accessories follow separate terms. Keep proof of purchase; manufacturer approval is required for a claim.
Are the kit photographs extra items I need to buy?
The listed kit contents are supplied. Other vehicle lighting and accessories in installation photographs are separate. Select the exact kit SKU and follow the notes under each photograph.














