DIODE DYNAMICS · 2019–2025 HONDA TALON
Compact trail light beside the Talon cage.
A pair of SS3 Combo pods with Talon-specific A-pillar mounts and a dual-output harness. Choose Sport or Pro and a White or Yellow main beam, while retaining the matched mounting layout.
- 2 SS3 podsLeft and right A-pillar kit
- Sport / ProChoose the output tier
- Combo opticsForward illumination and width
- 2019–2025Check windshield and cage clearance

PURPOSEFUL LIGHTING
A kit built around the job
Talon-specific mounts
The DD7907P bracket kit places a pod beside each A-pillar using the specified factory mounting arrangement.
Choose the main beam
White and Yellow are separate main-beam configurations. The Combo pattern combines forward light with width around the trail.
Separate accent control
The SS3 pods provide Amber backlights separately from the selected White or Yellow main beam.

CHECK THE VEHICLE FIRST
Exact fitment and mounting
| Check | This kit |
|---|---|
| Vehicle | 2019–2025 Honda Talon |
| Mounting location | Two A-pillar mounting points |
| Windshield / aftermarket cage | Compatibility is not guaranteed; confirm clearance |
| Lamp supplied | SS3 Combo pods only |
| Installation | Vehicle mounts, bus-bar wiring and switch routing per current guide |
MATCH THE SKU TO YOUR SELECTION
Choose the exact kit
| Kit SKU | Output | Colour | Pattern / function |
|---|---|---|---|
| DD7908 | Sport | White | Combo |
| DD7909 | Sport | Yellow | Combo |
| DD7910 | Pro | White | Combo |
| DD7911 | Pro | Yellow | Combo |
Match the SKU, output tier and main-beam colour to the purchase selection above. Photographs include labelled configurations and comparisons; other lighting fitted to the vehicle is separate.
WHAT THE KIT SUPPLIES
The parts belong together

- Two SS3 Combo LED pods in the selected tier and main-beam colour
- Talon A-pillar bracket kit DD7907P
- One DD4093 Heavy Duty Dual Output 4-pin Wiring Harness
- Mounting hardware and installation guide
The exact kit SKU determines the lamp family, tier and colour. Sport/Pro kit photographs are representative; the selected SKU determines the output tier. Other vehicle lighting and optional switches are separate.
MOUNT · WIRE · AIM
Plan the installation before you begin
Remove the hood and cowl access pieces as directed, install the bracket bolts and spacers, and level both mounts before tightening. The current guide connects the harness at the Talon bus bar, with the stated ignition-on operation, and routes the switch into the cabin. Follow its fork-terminal, grounding and wire-routing instructions, then test and aim both pods.
Read the illustrated BTS installation guide
Check windshield and cage clearance before mounting. The linked guide covers both SS3 and SS5; use the correct branch and supplied hardware. Optional rocker-switch instructions do not mean that a separate rocker is included.
UNDERSTAND THE EXACT HARDWARE
Technical specifications
| Detail | This kit |
|---|---|
| Pod family | SS3 LED pods; two per kit |
| Main-beam colours | 6000K White or 3000K Yellow |
| Pattern | Combo / Driving and Flood TIR optics |
| Backlight | Amber |
| Vehicle bracket kit | DD7907P |
| Harness | DD4093 dual-output 4-pin |
| Pod operating voltage | 9–30 V |
| Pod protection | Manufacturer-rated IP69K |
| Operating temperature | −40°C to 85°C |
| Eligible lamp warranty | Limited lifetime; commercial/fleet and accessory qualifications below |
Output by option
| Configuration | What changes | What stays the same |
|---|---|---|
| Sport | Lower-output tier for the selected SS3 family | Two Combo pods, vehicle mounts and dual-output harness |
| Pro | Higher-output tier; colour-specific specifications apply | Same mounting layout and listed main-beam colours |
Output specifications apply to the selected pod, optic and colour. No combined kit lumen figure is claimed. Manufacturer beam photographs illustrate named configurations, not every selectable option.
Manufacturer warranty
Diode Dynamics provides a limited lifetime warranty for this product for eligible purchases from April 15, 2025. Commercial, industrial and fleet use is limited to 8 years. After the first 3 years, covered products require return for inspection and repair or replacement at the manufacturer’s discretion. Coverage applies to the specified lamp or component; bundled wiring and accessories follow their own published terms. Keep proof of purchase. Manufacturer approval and an RMA are required before return; labor and normal wear are excluded. Shipping obligations vary by location. See the manufacturer warranty terms for eligibility, exclusions and claim instructions.
OFFICIAL DIODE DYNAMICS VIDEOS
See the installation and understand the light
Load a video when you are ready. No autoplay or video download is required to read this page.
How To: Install 2019-2024 Honda Talon Stage Series A-Pillar Kit | Diode Dynamics
Use the current written guide for the selected kit; shared SS10, SS3/SS5, switch or other-lighting examples do not change included parts or supported years.
TIR Optics | Stage Series by Diode Dynamics
General TIR optics education, not exact-kit performance evidence.
Lumens, Lux, and Candela EXPLAINED | Diode Dynamics
General output terminology, not a kit-specific test.
CLEAR ANSWERS
Before you order
Will it fit behind my windshield?
Do not assume clearance. Diode Dynamics warns that a windshield or aftermarket roll cage may interfere. Confirm your setup with BTS before ordering.
Can a Yellow main beam turn White?
No. Main-beam colour is fixed by the selected kit. Backlight controls affect the separate accent only.
What warranty applies?
Diode Dynamics limited lifetime coverage applies to eligible lamps and purchases, subject to the manufacturer’s terms. Commercial, industrial and fleet use is limited to 8 years. The included wiring harness has separate three-year coverage; other accessories follow their own terms. Keep proof of purchase and obtain manufacturer approval and an RMA before returning anything; labour and normal wear are excluded.
Are the kit photographs extra items I need to buy?
The listed kit contents are supplied. Other vehicle lighting and accessories in installation photographs are separate. Select the exact kit SKU and follow the notes under each photograph.
Complete your Talon lighting plan
Compare the separate Talon SS5 roof lightbar kit and its illustrated roof installation guide. Confirm its roof and cage requirements; the roof kit is separate from this A-pillar kit.
















