United Pacific · 35727 / 35728
Projector beams and sequential signals
A black five-projector layout combines full LED low/high beams with a sequential turn signal and dual DRL light bars. This assembly is for 2018–2023 Cascadia trucks originally equipped with factory LED headlights.
Five-projector layout
A central high-power LED and four smaller outer projector lenses form the distinctive headlight layout.
Sequential signal and DRL
The turn signal uses 12 LEDs; the dual daytime-running-light bars use 72 LEDs.
Factory LED trucks only
Not for trucks originally equipped with halogen headlights. Match the original connector and required side.

Fitment & selection
Match the headlight to the original equipment
For the 2018–2023 Freightliner Cascadia originally equipped with factory LED headlights. Not for trucks originally equipped with halogen headlights.
| Driver | 35727 · one assembly |
|---|---|
| Passenger | 35728 · one assembly |
Installation & aiming
Match the original mounting points and connector before fitting. Connect the assembly according to its manufacturer diagram, check every lighting function and have the beam aim checked after installation. The supplied load resistor may not be required on an originally LED-equipped truck. United Pacific instructs installers to disconnect that resistor if it causes an error code or blows a fuse; follow the exact wiring instructions.
Lighting details
Specifications for this assembly
| Low beam | 1,500 lumens · 5500K · 3.0A at 12V DC |
|---|---|
| High beam | 2,000 lumens · 5500K · 3.0A at 12V DC |
| Turn signal | 12 LEDs, sequential function |
| DRL | 72 LEDs, dual light bars |
| Lens | Polycarbonate |
| Finish | Black inner housing |
| Package | One selected-side headlight assembly |
| Manufacturer compliance listing | DOT/SAE · FMVSS108 |
Product questions
Before you order
Will this fit a Cascadia with factory halogen headlights?
No. United Pacific excludes trucks originally equipped with halogen headlights.
Does it include a resistor?
Yes. The manufacturer notes that the supplied load resistor may not be required on an originally LED-equipped truck and should be disconnected if it causes an error code or blows a fuse.
Are both sides included?
No. Choose the driver or passenger assembly; each is sold individually.
3-year manufacturer warranty
United Pacific lists a 3-year warranty for these exact part numbers. Keep your purchase information and contact BTS Lighting for help with a product issue.

















