Showing all 44 results

Why Choose This Extension For Glass is Class Gen 2? Clean lighting installs need clean wiring. The DD4098 1m DT 4-pin extension wire gives your Glass is Class Gen 2 setup extra reach when the light location is too far from the harness, splitter, or mounting point. This is especially useful for universal Gen 2 kits, custom bracket placements, mirror-mounted lighting, grille-area layouts, and other semi-truck or pickup installs where you want a plug-and-play wiring path instead of a cut-and-splice solution. Key Features & Benefits Adds 1 Meter Of Plug-And-Play Wiring Reach The DD4098 gives you 1 meter of extra DT 4-pin wiring length. That helps when your Gen 2 watermelon light needs to be mounted farther from the harness output or splitter connection. Supports Cleaner Gen 2 Light Placement Glass is Class Gen 2 lights now use a 4-pin DT connector, and this extension helps preserve that connectorized setup. Instead of forcing the light to fit wherever the harness reaches, the DD4098 gives you more freedom to route wiring cleanly. Male-To-Female DT 4-Pin Extension The DD4098 uses one male DT 4-pin connector and one female DT 4-pin connector. This lets it sit inline between compatible Gen 2 lights, splitters, and harness connections. Heavy-Duty 14AWG Wire The DD4098 uses 14AWG wire, making it a practical wiring accessory for lighting installs that need more than a thin universal jumper. Over-Molded Connector Design The over-molded DT connector design helps provide strain relief and protection from the elements around the connector body. This supports a cleaner installation and helps reduce exposed connection points. Performance / Compatibility / Use Case The DD4098 is best used when you need a shorter extension for compatible Glass is Class Gen 2 DT 4-pin lighting systems. It is a smart add-on for customers building a plug-and-play Gen 2 layout with the BTS universal kit, DD4104 relay switched harness, DD4100 splitter, and additional Gen 2 lights. Use cases include: Extending a Gen 2 light from a nearby splitter Routing wiring around a bracket, grille, bumper, or mirror mount Keeping the harness connection accessible Avoiding short wire runs that pull tight Reducing the need for cutting and splicing This extension does not add power by itself. It should be used inside a properly fused, compatible DT 4-pin lighting system. Installation / Fitment / Technical Details This extension is designed for compatible DT 4-pin wiring layouts. For Glass is Class Gen 2 installs, confirm that your lights and harness use matching DT 4-pin connectors before ordering. Technical details: Product type: DT 4-pin extension wire SKU: DD4098 Length: 1 meter Connector layout: 1 male DT connector and 1 female DT connector Wire size: 14AWG Connector type: DT 4-pin Operating voltage listed by Diode Dynamics: 9–16V Operating temperature listed by Diode Dynamics: -40C to 85C Installation time listed by Diode Dynamics: 5–10 minutes Tools listed by Diode Dynamics: None Modification listed by Diode Dynamics: None Listed shipped weight: 0.5 lb Important voltage note: Diode Dynamics lists this extension at 9–16V. For 24V Glass is Class Gen 2 builds, confirm the full harness and wiring setup before installing. Build Quality / Materials / Warranty / Trust Signals Diode Dynamics lists this extension with heavy-duty 14AWG wire, standard DT 4-pin connectors, over-molded connector bodies, and a 3-year replacement limited warranty. For BTS customers, the value is simple: this turns a generic DT extension into a practical Gen 2 watermelon light wiring add-on. It helps customers expand and route their Glass is Class Gen 2 installs without cutting into the harness. What’s Included 1x Diode Dynamics DD4098 DT 4-Pin Extension Wire, 1m G) Frequently Asked Questions About The DD4098 1m DT 4-Pin Extension Does the DD4098 work with Glass is Class Gen 2 watermelon lights? Yes, it is intended for compatible DT 4-pin Glass is Class Gen 2 wiring setups. Confirm your lights, harness, and splitter use matching DT 4-pin connectors before ordering. What is the DD4098 used for? The DD4098 adds 1 meter of extension length between compatible DT 4-pin wiring connections. It helps place Gen 2 lights farther from the relay harness or splitter. Is this extension plug-and-play? Yes, when used with compatible DT 4-pin connectors, the DD4098 is a plug-and-play extension wire. No cutting or splicing is required for a matching setup. Should I choose the 1m DD4098 or the 3m DD4099? Choose the DD4098 when the light is close but needs a little extra wire length. Choose the DD4099 when you need a longer run, such as routing across a vehicle, toward the rear, or through a larger custom lighting layout. Can I use multiple extensions together? Avoid stacking extensions without checking current draw, voltage drop, and harness limits. For longer layouts, choose the correct extension length and confirm the full setup before installation. Will this work with older Glass is Class lights? Older hardwired Glass is Class lights may not use the same DT 4-pin connector. This extension is intended for compatible Gen 2 DT 4-pin setups. Can I use this on a 24V truck? Do not assume this extension is 24V compatible. Diode Dynamics lists this extension at 9–16V, so 24V builds should be confirmed before installation.

DD4098 1m DT 4-Pin Extension For Gen 2 Watermelon Lights

USD 14.95
Backorder
DD4099 3m DT 4-Pin Extension For Gen 2 Watermelon Lights

DD4099 3m DT 4-Pin Extension For Gen 2 Watermelon Lights

USD 29.95
C2 2.0 CrossLink Endmount Kit

Diode Dynamics C2 2.0 CrossLink Endmount Kit

USD 29.95
C2 2.0 CrossLink Kit

Diode Dynamics C2 2.0 CrossLink Kit

USD 9.95
C2 2.0 CrossLink Support Kit

Diode Dynamics C2 2.0 CrossLink Support Kit

USD 19.95
C2 2.0 LED Pod Cover

Diode Dynamics C2 2.0 LED Pod Cover Amber (one)

USD 8.95
C2 2.0 LED Pod Cover

Diode Dynamics C2 2.0 LED Pod Cover Black (one)

USD 8.95
C2 2.0 LED Pod Cover

Diode Dynamics C2 2.0 LED Pod Cover Clear (one)

USD 8.95
C2 2.0 LED Pod Cover

Diode Dynamics C2 2.0 LED Pod Cover Yellow (one)

USD 8.95
C2 2.0 LED Pod Cover

Diode Dynamics C2 2.0 LED Pod Cover, Smoked (one)

USD 8.95
Clear Lens for C2 2.0 LED Pods (one)

Diode Dynamics Clear Lens for C2 2.0 LED Pods (one)

USD 24.95
Lens for SS3 Pods (one)

Diode Dynamics Clear Lens for SS3 Pods (one)

USD 29.95
Clear Lens for SS5 Pods (one)

Diode Dynamics Clear Lens for SS5 Pods (one)

USD 39.95
Clear Lens for SSC1 LED Pods (one)

Diode Dynamics Clear Lens for SSC1 LED Pods (one)

USD 14.95 USD 19.95Price range: USD 14.95 through USD 19.95
Diode Dynamics Kuat IBEX Bed Rack with SS10 Chase Light Kit

Diode Dynamics Kuat IBEX Bed Rack with SS10 Chase Light Kit

USD 1,998.95 USD 2,098.95Price range: USD 1,998.95 through USD 2,098.95
SS3 Dual-Pod Bracket Kit

Diode Dynamics SS3 Dual-Pod Bracket Kit

USD 59.95
SS3 LED Pod Cover

Diode Dynamics SS3 LED Pod Cover, Black (one)

USD 9.95
SS3 LED Pod Cover

Diode Dynamics SS3 LED Pod Cover, Blue (one)

USD 9.95
SS3 LED Pod Cover

Diode Dynamics SS3 LED Pod Cover, Clear (one)

USD 9.95
SS3 LED Pod Cover

Diode Dynamics SS3 LED Pod Cover, Smoked (one)

USD 9.95
SS3 LED Pod Cover

Diode Dynamics SS3 LED Pod Cover, Yellow (one)

USD 9.95
SS3 LED Pod Replacement Front Bezel

Diode Dynamics SS3 LED Pod Replacement Front Bezel

USD 9.95 USD 19.95Price range: USD 9.95 through USD 19.95
SS5 CrossLink Endmount Kit

Diode Dynamics SS5 CrossLink Endmount Kit

USD 29.95
SS5 CrossLink Kit

Diode Dynamics SS5 CrossLink Kit

USD 9.95
SS5 CrossLink Security Hardware Kit

Diode Dynamics SS5 CrossLink Security Hardware Kit

USD 59.95
SS5 CrossLink Support Kit

Diode Dynamics SS5 CrossLink Support Kit

USD 19.95
SS5 CrossLink Universal Bracket Kit (set)

Diode Dynamics SS5 CrossLink Universal Bracket Kit (set)

USD 79.95
SS5 LED Pod Cover Standard

Diode Dynamics SS5 LED Pod Cover Standard, Blue (one)

USD 9.95
SS5 LED Pod Cover, Black (one)

Diode Dynamics SS5 LED Pod Cover, Black (one)

USD 9.95
Diode Dynamics SS5 LED Pod Cover, Clear (one)

Diode Dynamics SS5 LED Pod Cover, Clear (one)

USD 9.95
Diode Dynamics SS5 LED Pod Cover, Smoked (one)

Diode Dynamics SS5 LED Pod Cover, Smoked (one)

USD 9.95
Diode Dynamics SS5 LED Pod Cover, Yellow (one)

Diode Dynamics SS5 LED Pod Cover, Yellow (one)

USD 9.95
Diode Dynamics SSC1 LED Pod Cover (one)

Diode Dynamics SSC1 LED Pod Cover (one)

USD 5.95
Stage Series Universal Roll Bar Mount Kit (one)

Diode Dynamics Stage Series Universal Roll Bar Mount Kit (one)

USD 29.95
Diode Dynamics Stand-Off D-Switch Hub Mounting Kit

Diode Dynamics Stand-Off D-Switch Hub Mounting Kit

USD 59.95 USD 659.95Price range: USD 59.95 through USD 659.95
Yellow Lens for C2 2.0 LED Pods (one)

Diode Dynamics Yellow Lens for C2 2.0 LED Pods (one)

USD 24.95
Yellow Lens for SS3 Pods (one)

Diode Dynamics Yellow Lens for SS3 Pods (one)

USD 29.95 USD 34.95Price range: USD 29.95 through USD 34.95
Yellow Lens for SS5 Pods (one)

Diode Dynamics Yellow Lens for SS5 Pods (one)

USD 39.95
Yellow Lens for SSC1 LED Pods (one)

Diode Dynamics Yellow Lens for SSC1 LED Pods (one)

USD 14.95 USD 19.95Price range: USD 14.95 through USD 19.95
Morimoto 1Banger Mounts: Top (Set)

Morimoto 1Banger Mounts: Top (Set)

USD 18.00
Morimoto 4Banger Hard Covers

Morimoto 4Banger Hard Covers

USD 9.95
Morimoto 4Banger Mounts: Top (Set)

Morimoto 4Banger Mounts: Top (Set)

USD 36.00
Morimoto 4Banger Replacement Lens Optics

Morimoto 4Banger Replacement Lens Optics

USD 33.00 USD 34.00Price range: USD 33.00 through USD 34.00
4Banger Standard Bottom Mount Brackets (Set)

Morimoto 4Banger Standard Bottom Mount Brackets (Set)

USD 16.00

Price

Select your currency
USD United States (US) dollar
CAD Canadian dollar