Product Overview
When space is limited but visibility is critical, this low-profile LED marker light delivers dependable red illumination in a compact housing.
Designed for tight installations, it requires only a 3/4″ mounting hole, making it ideal for streamlined builds and smaller mounting areas.
Perfect for:
-
Trailers & flatbeds
-
Semi trucks & box trucks
-
Service & utility vehicles
-
RVs & enclosed haulers
-
Agricultural & off-road equipment
Key Features & Benefits
Super-Bright Red SMD LED
Features a high-output red surface-mount LED for strong, focused clearance and marker visibility.
Compact 3/4″ Mount Design
Requires only a 3/4″ mounting hole — ideal for low-profile installations and limited-space applications.
Durable Polycarbonate Lens
Injection-molded red lens provides impact resistance and optical clarity.
Epoxy-Sealed Black Housing
Sealed electronics help protect against moisture, dust, corrosion, and vibration.
Quick 2-Wire Installation
Includes two 18-gauge pre-stripped wire leads (6-1/8″ length) for simple 12V DC wiring.
DOT / SAE P2 & FMVSS 108 Compliant
Certified under DOT/SAE P2 and FMVSS 108 for clearance and marker applications when properly installed.
Performance / Compatibility / Use-Case
- Type: Clearance / Marker
-
Voltage: 12V DC
-
LED Type: Red SMD
-
Lens Color: Red
-
Housing: Black back, epoxy-sealed
-
Wiring: 2-wire configuration | Length: 6-1/8″
-
Mounting: 3/4″ hole required
-
Grommet: Black rubber grommet included
This is a single-function clearance/marker light (not dual function).
Placement requirements vary by vehicle and jurisdiction. Confirm proper rear-facing or side-marker placement before installation.
Installation / Fitment / Technical Details
This light uses a 2-wire setup:
-
Positive lead
-
Ground lead
Designed for 12V DC systems only.
The included rubber grommet allows for vibration-resistant mounting in a standard 3/4″ opening.
Professional installation is recommended if unfamiliar with vehicle electrical systems.
Build Quality / Warranty
Constructed with:
-
Injection-molded polycarbonate lens
-
Epoxy-sealed electronics
-
Weather-resistant housing
The sealed design helps protect against road spray, grime, and typical heavy-duty operating conditions.
Warranty: 10-year manufacturer warranty.
What’s Included
-
(1) LED 1-1/4″ Round Clearance/Marker Light – Red LED / Red Lens
-
(1) Black Rubber Grommet
-
(2) 18-Gauge Pre-Stripped Wire Leads (6-1/8″)
Frequently Asked Questions
Is this a dual function marker light?
No. This model uses a 2-wire configuration and functions as a standard clearance/marker light.
What size hole does this light require?
This light requires a 3/4″ mounting hole and includes a rubber grommet for installation.
What does P2 mean on a marker light?
P2 is a DOT/SAE classification for clearance and marker lights, indicating compliance with specific performance standards when installed properly.
Is this light road legal?
It is certified under DOT/SAE P2 and FMVSS 108 standards for clearance and marker applications. Always confirm proper placement and local regulations.
Can this be used on trailers?
Yes. It is compatible with standard 12V DC trailer wiring systems.
Is this waterproof?
The housing is epoxy-sealed and designed to resist moisture intrusion under typical road conditions.
