Morimoto XB LED Low Profile Tail Lights (Smoked) for Ford Bronco
The Morimoto LF750 smoked-lens low-profile tail-light pair is listed for 2021–2026 Ford Bronco, excluding Raptor. Turn-signal colour depends on the original tail-light package: red with factory incandescent tails or amber with factory LED tails.
Fitment and original equipment
- Ford Bronco: 2021–2026 with matching original incandescent or LED tail-light equipment.
- Bronco Raptor is not compatible; Bronco Sport is not listed.
- Morimoto designed and tested these housings on US-spec vehicles. Confirm the actual rear lighting and connectors on Canadian or other-market vehicles.
Specifications and contents
| Part number | LF750 |
|---|---|
| Quantity | Two complete smoked-lens tail lights, left/right pair |
| Brake / parking / reverse | Red brake and parking; white reverse |
| Turn signal with OEM incandescent tails | Red |
| Turn signal with OEM LED tails | Amber |
| Included resistors | Two magnet-mounted resistors |
| Input | Ford multi-pin OEM |
| Optional accessory | Backup Light Boost Bar, separate from the base pair |
Before installation
Identify the original incandescent or LED tail-light package. The guide uses the supplied resistors for the original incandescent configuration; OEM LED trucks skip that step. Verify clearance and test all modes before reinstalling trim. Other aftermarket signal lamps can affect circuit operation.
Replacement references
Replaces Ford part numbers including:
-
JW7Z-13A588-CA
-
JW7Z-13A589-CA
-
M2DB-13B505-B
-
M2DB-13B552-B
Warranty Coverage
Backed by Morimoto’s 5-Year Limited Warranty.
Frequently Asked Questions About Bronco Low Profile Tail Lights
Is LF750 the red or smoked outer-lens version?
LF750 is the smoked-lens version. The outer lens choice does not change the need to match the original incandescent or LED tail-light configuration.
Will the turn signals always illuminate amber?
No. The exact specification lists red turns for Broncos with original incandescent tail lights and amber turns for those with original LED tail lights. Identify the factory package before choosing the wiring procedure.
Can these tail lights be installed on Bronco Raptor?
Morimoto explicitly excludes Bronco Raptor from this tail-light application. A headlight application for Raptor does not establish tail-light compatibility.
When are the supplied resistors used?
The guide installs the magnet-mounted resistors for trucks with original incandescent tail lights and directs original-LED trucks to skip that step. Follow the procedure for the actual factory lamps rather than installing every included part by default.
Are reverse lights included without the Boost Bar?
Yes. White LED reverse lighting is built into the pair. The optional Backup Light Boost Bar is separate and has its own mounting and wiring steps.
Is Bronco Sport included because it shares the Bronco name?
No Bronco Sport application is listed. Match the exact vehicle platform, original tail lights and connectors rather than relying on the name.
Can other aftermarket signal lights affect operation?
The guide warns that other aftermarket lighting can cause hyperflash or sequential-signal issues through a circuit mismatch. Test the complete installed combination and the equipment-dependent turn colour.
