The Nitto Ridge Grappler in size LT315/45R22 is a hybrid-terrain radial tire with a 121/118Q service description. The Ridge Grappler is Nitto’s hybrid-terrain option, positioned between an all-terrain and a mud-terrain tire.
Size and wheel specifications
- Tire size: LT315/45R22
- Manufacturer stock number: 218500
- Wheel diameter: 22 in
- Nominal section width: 315 mm
- Load index / speed rating: 121/118Q
- Load designation: Load Range F (12-ply rating)
- Approved rim-width range: 10.0–12.0 in
- Measuring rim width: 10.5 in
- Manufacturer-listed overall diameter: 33.19 in
- Manufacturer-listed overall width: 12.40 in
- Tread depth: 16.5/32 in
- Maximum load / inflation rating (single-tire application): 3,195 lb at 80 psi
Nitto lists this exact stock number at 33.19 inches overall diameter and 12.40 inches overall width on the 10.5-inch measuring rim. The measuring rim is the reference for those published dimensions; the approved rim-width range is 10.0–12.0 inches.
The 121/118 load index lists 121 for single-tire use and 118 for dual-tire use. These ratings apply to different installation arrangements. The maximum-load figure above is the single-tire rating; do not use it as a dual-installation capacity.
Before ordering
Compare the complete size, load index and speed rating with your vehicle’s approved requirements. Confirm wheel width, wheel load capacity and clearance as well as diameter. A tire’s dimensions do not establish an OEM vehicle application. If changing tire size or type, have the combination and operating pressure checked by a qualified tire professional.
Questions about LT315/45R22
What do the numbers in LT315/45R22 mean?
The size uses a nominal 315 mm section width and an aspect ratio of 45; the sidewall height is expressed as a percentage of that nominal width. R denotes radial construction and 22 is the wheel diameter in inches. Nitto lists this exact tire at 33.19 inches overall diameter and 12.40 inches overall width on the 10.5-inch measuring rim. LT identifies the light-truck size designation.
What wheel width is approved for this LT315/45R22 tire?
Nitto lists 10.0–12.0 inches as the approved rim-width range for stock number 218500. Its 10.5-inch measuring rim is the reference for the published dimensions, not the only approved width. The wheel must also have the correct 22-inch diameter and be suitable for the vehicle and required load.
Does Load Range F mean this tire contains 12 physical plies?
No. Load Range F corresponds to a 12-ply rating, a load/strength classification rather than a count of physical cord layers. This tire’s service description is 121/118Q. The load index is 121 in a single-tire application and 118 in a dual-tire application; Q is the speed symbol.
Is 80 psi the pressure I should run in this tire?
No. The listed 3,195 lb at 80 psi is Nitto’s maximum load/inflation rating for a single-tire application. It is not a recommended pressure for every vehicle. Follow the applicable vehicle and tire guidance, and have the operating pressure confirmed when changing tire size, type or load requirements.
Will this LT315/45R22 tire fit any vehicle with 22-inch wheels?
No. A matching 22-inch wheel diameter is only one requirement. Check the approved 10.0–12.0-inch rim-width range, complete 121/118Q service description, wheel load capacity and vehicle clearance. The published 33.19-inch diameter is useful for comparison, but does not prove vehicle fitment or that a lift or modification is unnecessary.
