The Nitto Terra Grappler G3 in size LT265/60R20 is an all-terrain radial tire with service description 121/118S. The Terra Grappler G3 is Nitto’s all-terrain tire for drivers comparing road use and off-road capability.
Size and wheel specifications
- Tire size: LT265/60R20
- Manufacturer stock number: 223830
- Wheel diameter: 20 in
- Nominal section width: 265 mm
- Load index / speed rating: 121/118S
- Load designation: Load Range E (10-ply rating)
- Approved rim-width range: 8.0–9.5 in
- Measuring rim width: 8.0 in
- Manufacturer-listed overall diameter: 32.52 in
- Manufacturer-listed overall width: 10.71 in
- Tread depth: 15.7/32 in
- Maximum load / inflation rating (single-tire application): 3,195 lb at 80 psi
Nitto lists this exact stock number at 32.52 inches overall diameter and 10.71 inches overall width on the 8.0-inch measuring rim. The measuring rim is the reference for those published dimensions; the approved rim-width range is 8.0–9.5 inches.
The 121/118 load index lists 121 for single-tire use and 118 for dual-tire use. These ratings apply to different installation arrangements. The maximum-load figure above is the single-tire rating; do not use it as a dual-installation capacity.
Before ordering
Compare the complete size, load index and speed rating with your vehicle’s approved requirements. Confirm wheel width, wheel load capacity and clearance as well as diameter. A tire’s dimensions do not establish an OEM vehicle application. If changing tire size or type, have the combination and operating pressure checked by a qualified tire professional.
Questions about LT265/60R20
What do the numbers in LT265/60R20 mean?
The size uses a nominal 265 mm section width and an aspect ratio of 60; the sidewall height is expressed as a percentage of that nominal width. R denotes radial construction and 20 is the wheel diameter in inches. Nitto lists this exact tire at 32.52 inches overall diameter and 10.71 inches overall width on the 8.0-inch measuring rim. LT identifies the light-truck size designation.
What wheel width is approved for this LT265/60R20 tire?
Nitto lists 8.0–9.5 inches as the approved rim-width range for stock number 223830. Its 8.0-inch measuring rim is the reference for the published dimensions, not the only approved width. The wheel must also have the correct 20-inch diameter and be suitable for the vehicle and required load.
Does Load Range E mean this tire contains 10 physical plies?
No. Load Range E corresponds to a 10-ply rating, a load/strength classification rather than a count of physical cord layers. This tire’s service description is 121/118S. The load index is 121 in a single-tire application and 118 in a dual-tire application; S is the speed symbol.
Is 80 psi the pressure I should run in this tire?
No. The listed 3,195 lb at 80 psi is Nitto’s maximum load/inflation rating for a single-tire application. It is not a recommended pressure for every vehicle. Follow the applicable vehicle and tire guidance, and have the operating pressure confirmed when changing tire size, type or load requirements.
Will this LT265/60R20 tire fit any vehicle with 20-inch wheels?
No. A matching 20-inch wheel diameter is only one requirement. Check the approved 8.0–9.5-inch rim-width range, complete 121/118S service description, wheel load capacity and vehicle clearance. The published 32.52-inch diameter is useful for comparison, but does not prove vehicle fitment or that a lift or modification is unnecessary.
