ReadyLIFT 69-5010 SST lift kit for Toyota Sequoia
This kit provides a nominal 2.5-inch front and 1.5-inch rear lift for compatible 2001–2007 Toyota Sequoia 2WD and 4WD models. Inspect the rear suspension before ordering.
Required fitment check
Rear air suspension is excluded. The rear spacer requires the matching top bolt-hole provision in the frame. Year and trim cannot identify the frame design; inspect it physically. If that mounting provision is absent, contact BTS or ReadyLIFT before ordering for the manufacturer’s installation direction.
Included components and installation
The kit includes two front strut extensions, two rear coil spacers, front differential-drop and skid-plate spacer kits, and installation hardware. It is intended for stock suspension, without another lift already fitted. Actual height can vary with the starting ride height and load.
Use a qualified suspension installer and the 69-5010 installation guide. Check alignment, brake-hose and ABS-wire clearance, and headlamp aim after installation.
Does it fit every Sequoia in those years?
No. Confirm both the rear suspension and frame mounting provision. A year/make/model result does not replace that inspection.
