United Pacific 29105: Kenworth T880 below-headlight fender guards
United Pacific 29105 supplies two highly polished 430 stainless steel fender guards for the below-headlight area on listed Kenworth T880 trucks. The guards are die-stamped to follow the fender curve and have pre-punched rivet holes. Drilling is required on the mounting surface.
Fitment and equipment checks
Listed for 2014–2019 Kenworth T880. Match the fender section below the headlights and its mounting contour. Check later years, changed fenders or altered headlights with BTS.
Specifications and package contents
- Part number: 29105
- Material: Highly polished 430 stainless steel
- Position: Kenworth T880 below-headlight fender guards
- Mounting: Pre-punched rivet holes; drilling required
- Package quantity: Pair of guards or trim pieces
- Warranty: 6-month warranty listed by BTS
Installation notes
Position each guard below the headlight and check that the stamped curve follows the existing fender. Confirm fastener size and mounting locations before drilling, with clear access behind the panel. Pre-punched holes in the guard do not mean the truck already has matching holes.
What is included
Two 29105 stainless fender guards. Confirm the required rivets or other fastening hardware before installation; no separate fastener inventory is specified for this product.
Questions about United Pacific 29105
Where does 29105 mount on a T880?
It mounts on the fender section below the headlight and is shaped to follow that curve. The listed application is 2014–2019 T880.
Do pre-punched holes make this a no-drill installation?
No. United Pacific explicitly requires drilling for mounting. The guard has pre-punched rivet holes, so verify the fender positions and clearances before drilling.
Does one package include two guards?
Yes. The current package specification lists two pieces of highly polished 430 stainless steel.
Are rivets included?
Confirm the required fastening hardware with BTS before installation. The product identifies rivet holes and drilling, without a separate supplied-fastener list.
Will these replace a complete T880 fender?
No. They are guards for the existing below-headlight fender section. Inspect the underlying fender and supports separately.
