United Pacific 29149: Cascadia below-headlight stainless fender guards
United Pacific 29149 supplies a pair of highly polished 430 stainless steel guards for the fender area below the headlights on listed Cascadia trucks. The pieces attach with 3M double-sided tape and help protect the covered surface from road debris.
Fitment and equipment checks
Listed for 2018–2023 Freightliner Cascadia. Match the below-headlight fender contour and confirm later years or replacement fenders with BTS before ordering.
Specifications and package contents
- Part number: 29149
- Material: Highly polished 430 stainless steel
- Position: Cascadia below-headlight stainless fender guards
- Mounting: 3M double-sided tape
- Package quantity: Pair of guards or trim pieces
- Warranty: 6-month warranty listed by BTS
Installation notes
Trial-fit the guards before exposing the adhesive. The supplied tape guide calls for a clean, thoroughly dried surface and a body-surface temperature of at least 60°F during application. Align each guard at its intended contour and apply firm pressure; keep oil, wax and dirt off the bonding surface.
What is included
One pair of 29149 below-headlight fender guards with the tape mounting provision. Headlights and complete fenders are separate.
Questions about United Pacific 29149
Where do 29149 guards mount?
They mount on the fender area below the headlights of the listed 2018–2023 Cascadia application. Compare that exact contour before ordering.
Do these guards use rivets or tape?
The manufacturer specifies 3M double-sided tape for this design. Trial-fit and follow the supplied tape surface-preparation instructions.
Can I install them on a cold or wet truck?
The mounting surface must be clean and thoroughly dry. The supplied guide says the body surface must not be below 60°F during application.
Does one order include both guards?
Yes. The manufacturer lists a two-piece pair made from highly polished 430 stainless steel.
Do these guards cover a damaged headlight lens?
No. They fit below the headlights and do not replace lenses, lamp housings or structural fender components.
