United Pacific 29153: Cascadia lower-step surface protective plates
United Pacific 29153 is a pair of highly polished 430 stainless steel protective plates for the lower-step surface on listed Freightliner Cascadia trucks. The plates cover the painted surface to help protect it from scratches and scuffs. This design is not for trucks equipped with a lane-departure sensor.
Fitment and equipment checks
Listed for 2018–2025 Freightliner Cascadia without a lane-departure sensor. Check the actual lower-step shape and equipment before ordering. Confirm a later truck, replacement step or changed sensor equipment with BTS.
Specifications and package contents
- Part number: 29153
- Material: Highly polished 430 stainless steel
- Position: Cascadia lower-step surface protective plates
- Mounting: 3M double-sided tape; clean attachment surface required
- Package quantity: Pair
- Warranty: 6-month warranty listed by BTS
Installation notes
Check sensor equipment and trial-position both plates before removing the tape backing. The supplied tape guide requires a clean, thoroughly dried surface and says the body surface must not be below 60°F during application. Align the plate with its intended contour and apply firm pressure without contaminating the adhesive.
What is included
One pair of 29153 stainless lower-step protective plates with the tape mounting provision. Complete steps, brackets and vehicle sensors are separate components.
Questions about United Pacific 29153
Can I use 29153 on a Cascadia with a lane-departure sensor?
No. United Pacific explicitly excludes trucks equipped with a lane-departure sensor. Confirm the actual truck equipment before selecting these plates.
Which Cascadia years are listed?
The listed application is 2018–2025 Cascadia, subject to the sensor exclusion and matching lower-step shape. Confirm later years or changed steps with BTS.
Are these complete replacement steps?
No. They are protective plates for the existing lower-step surface. They do not replace the underlying step, supports or sensors.
Is drilling specified for this plate?
The manufacturer specifies 3M double-sided tape. Trial-fit, clean and dry the attachment surface before exposing the adhesive.
Does one package cover both sides?
The manufacturer sells 29153 as a pair. Match each plate to its intended lower-step contour before attaching it.
