Selected warehouse item: 6 LED Dual Function Penny Light – Red w/Clear Lens. Original item SKU: 36038. Ships from our Canadian warehouse while stock remains available.
Product Overview
This 1.25″ round LED marker light delivers bright red illumination through a clear lens, giving you a sharper appearance compared to traditional red lenses while maintaining proper red output.
Ideal for:
-
Rear clearance lighting
-
Trailer side markers
-
Sleeper rear panels
-
Frame rail installations
-
Custom stainless builds
-
Fleet maintenance replacements
Key Features & Benefits
Clear Lens with Red LED Output
Produces red illumination through a clear polycarbonate lens for a clean, updated look while maintaining proper marker light function.
Six High-Intensity SMD LEDs
Six surface-mount LEDs provide consistent red light output for improved visibility compared to traditional incandescent marker lights.
Dual Function Capability
Designed to function as both a clearance and marker light depending on wiring configuration.
DOT / SAE P2 Compliant
Manufactured to meet DOT/SAE P2 standards for clearance and marker applications when installed correctly.
Durable Construction
Injection-molded polycarbonate lens combined with epoxy-coated, fully sealed electronics helps protect against vibration and moisture.
Complete Installation Kit
Includes:
-
Polished stainless steel bezel
-
Quality rubber grommet
-
7″ 18-gauge wire leads
-
0.180″ male bullet plugs
Performance / Compatibility / Use-Case
-
Voltage: 12V DC systems only
-
LED Count: 6 SMD LEDs
-
Lens Color: Clear
-
LED Color: Red
-
Mount Type: Grommet mount
-
Wiring: 3-wire configuration
Mounting Hole Requirement:
Designed for hole diameters between 1-3/8″ and 1-7/16″.
Common Install Locations:
-
Rear cab panels
-
Trailer side rails
-
Rear frame sections
-
Sleeper rear accents
-
Custom brackets
Lighting placement requirements vary by vehicle and jurisdiction. Always confirm proper installation location and compliance requirements.
Installation / Fitment / Technical Details
This light uses a 3-wire configuration for dual function operation.
Pre-installed 7″ 18-gauge leads with 0.180″ bullet plugs allow straightforward wiring into compatible 12V systems.
Designed strictly for 12V DC applications. Not intended for 24V systems unless properly regulated.
Professional installation is recommended if unfamiliar with vehicle wiring.
Build Quality / Warranty
Manufactured by United Pacific Industries, known for heavy-duty truck lighting and accessories.
Constructed with:
-
Injection-molded polycarbonate lens
-
Epoxy-sealed electronics
-
Stainless steel bezel
-
Rubber mounting grommet
Designed to withstand typical heavy-duty road conditions.
Warranty: Lifetime Manufacturer Warranty
What’s Included
-
(1) 6 LED 1-1/4″ Red LED Clear Lens Marker Light
-
(1) Stainless Steel Bezel
-
(1) Rubber Grommet
-
Pre-installed 7″ wire leads
Frequently Asked Questions
Can this red marker light be used on the front of a truck?
Red marker lights are typically used for rear-facing applications. Always confirm proper placement requirements for your vehicle and jurisdiction before installation.
What does P2 mean on a red clearance light?
P2 refers to a DOT/SAE classification for clearance and marker lights. It indicates the light meets specific performance standards when properly installed.
What size hole does this light require?
This light is designed for mounting holes between 1-3/8″ and 1-7/16″ in diameter.
Is a clear lens red LED light legal?
When the LED output is red and the light meets applicable standards such as P2, it is commonly used for rear clearance and marker applications. Always verify local regulations.
Can this replace an incandescent 1.25″ marker light?
In many applications, yes — as long as mounting hole size and wiring configuration are compatible.
Does this include mounting hardware?
Yes. A stainless steel bezel and rubber grommet are included.
