Glass Watermelon Light Upgraded Adhesive Gasket
Glass Watermelon Light Upgraded Adhesive Gasket
Glass Watermelon Light Upgraded Adhesive Gasket
Glass Watermelon Light Upgraded Adhesive Gasket
Glass Watermelon Light Upgraded Adhesive Gasket
Glass Watermelon Light Upgraded Adhesive Gasket

Glass Watermelon Light Upgraded Adhesive Gasket

USD 5.00

Use the USD/CAD selector on the right side of the screen to shop in your preferred currency.

Upgrade your watermelon light seal and prevent moisture intrusion.

This adhesive-backed gasket is designed to improve sealing on glass watermelon marker lights using 1157 or 3157 bulbs, helping reduce condensation and water entry.

SKU: A501 Categories: , , Brand:

Price

Description

Why Upgrade Your Watermelon Light Gasket?

Standard foam gaskets on many glass watermelon lights can allow moisture to enter the housing over time. This can lead to condensation, corrosion, and premature LED bulb failure.

The Glass Watermelon Light Upgraded Adhesive Gasket provides a stronger sealing solution designed to help prevent water intrusion.

By improving the seal between the lens and light housing, this gasket helps protect the internal components of your marker lights.

Ideal for trucks that experience frequent exposure to rain, snow, road spray, or washdowns.

Key Features & Benefits

Improved Waterproof Seal

Designed to reduce water intrusion between the lens and light housing.

Helps Prevent Condensation

Reducing moisture inside the light helps minimize condensation buildup.

Protects LED Bulbs

A better seal helps protect LED bulbs from moisture exposure that can shorten their lifespan.

Adhesive-Backed Installation

Adhesive backing helps keep the gasket securely in place during installation.

Designed for Glass Watermelon Lights

Compatible with most 1157 and 3157 glass watermelon light assemblies.

Performance / Compatibility / Use-Case

Compatible with:

  • Glass watermelon marker lights

  • Cab marker lights using 1157 or 3157 bulbs

Common uses include:

  • Preventing condensation inside cab lights

  • Restoring leaking marker lights

  • Upgrading factory foam gaskets

  • Sealing custom truck lighting setups

Fitment may vary by light housing design.

Installation / Fitment / Technical Details

The gasket installs between the glass lens assembly and the light housing.

For best results:

  1. Clean the mounting surface.

  2. Apply the adhesive gasket to the light housing.

  3. Install the lens assembly.

Installation Tip

Most glass watermelon lights have a wire pass-through opening.
For a fully sealed installation, it is recommended to apply high-temperature silicone around the wire entry point.

Build Quality / Materials / Warranty

Constructed with:

  • Adhesive-backed sealing material

  • Designed to improve sealing performance over standard foam gaskets

Built to help protect marker light components from moisture intrusion.

Warranty availability varies by manufacturer listing.

What’s Included

  • 1 × Glass Watermelon Light Upgraded Adhesive Gasket

Frequently Asked Questions About the Watermelon Light Gasket

Why do watermelon lights get condensation inside them?

Condensation can occur when moisture enters the light housing through weak seals or open wire pass-through areas.

Will this gasket make my cab lights waterproof?

This gasket helps improve sealing, but sealing the wire pass-through area with silicone is recommended for best results.

What bulbs does this gasket support?

It is designed to work with glass watermelon lights using 1157 or 3157 bulbs.

Can I install this on LED watermelon lights?

It can be used on many glass watermelon light assemblies regardless of bulb type, depending on housing design.

Is this gasket reusable?

Adhesive gaskets are typically designed for single installation.

Does this include the light or lens?

No. This product includes the gasket only.

 

Additional information
Weight 0.1 lbs
Dimensions 3 × 3 × 0.25 in
Product Reviews

Related products

Stainless Round Cab Light Bezel

Stainless Round Cab Light Bezel

USD 6.00
Backorder
DD4099 3m DT 4-Pin Extension For Gen 2 Watermelon Lights

DD4099 3m DT 4-Pin Extension For Gen 2 Watermelon Lights

USD 29.95
Glass Watermelon Light Venting Patches (10‑Pack) – Waterproof & Breathable Solution

Glass Watermelon Light Venting Patches (10‑Pack) – Waterproof & Breathable Solution

USD 5.00
9mm Black Foam Gasket - Thicker (100 Pcs)

9mm Black Foam Gasket – Thicker (100 Pcs)

USD 168.00
100 COUNT 3-PRONG FEMALE BULLET PLUGS WIRE HARNESS ROLL - 98.5' W/12" LEAD BETWEEN PLUGS

3-Prong Female Bullet Plugs Wire Harness – 12″ Lead Between Plugs

USD 4.00
Thick Foam Cab Light Gasket For Grakon 1000 Cab Light

Thick Foam Cab Light Gasket For Grakon 1000 Cab Light

USD 5.00
Why Choose This Extension For Glass is Class Gen 2? Clean lighting installs need clean wiring. The DD4098 1m DT 4-pin extension wire gives your Glass is Class Gen 2 setup extra reach when the light location is too far from the harness, splitter, or mounting point. This is especially useful for universal Gen 2 kits, custom bracket placements, mirror-mounted lighting, grille-area layouts, and other semi-truck or pickup installs where you want a plug-and-play wiring path instead of a cut-and-splice solution. Key Features & Benefits Adds 1 Meter Of Plug-And-Play Wiring Reach The DD4098 gives you 1 meter of extra DT 4-pin wiring length. That helps when your Gen 2 watermelon light needs to be mounted farther from the harness output or splitter connection. Supports Cleaner Gen 2 Light Placement Glass is Class Gen 2 lights now use a 4-pin DT connector, and this extension helps preserve that connectorized setup. Instead of forcing the light to fit wherever the harness reaches, the DD4098 gives you more freedom to route wiring cleanly. Male-To-Female DT 4-Pin Extension The DD4098 uses one male DT 4-pin connector and one female DT 4-pin connector. This lets it sit inline between compatible Gen 2 lights, splitters, and harness connections. Heavy-Duty 14AWG Wire The DD4098 uses 14AWG wire, making it a practical wiring accessory for lighting installs that need more than a thin universal jumper. Over-Molded Connector Design The over-molded DT connector design helps provide strain relief and protection from the elements around the connector body. This supports a cleaner installation and helps reduce exposed connection points. Performance / Compatibility / Use Case The DD4098 is best used when you need a shorter extension for compatible Glass is Class Gen 2 DT 4-pin lighting systems. It is a smart add-on for customers building a plug-and-play Gen 2 layout with the BTS universal kit, DD4104 relay switched harness, DD4100 splitter, and additional Gen 2 lights. Use cases include: Extending a Gen 2 light from a nearby splitter Routing wiring around a bracket, grille, bumper, or mirror mount Keeping the harness connection accessible Avoiding short wire runs that pull tight Reducing the need for cutting and splicing This extension does not add power by itself. It should be used inside a properly fused, compatible DT 4-pin lighting system. Installation / Fitment / Technical Details This extension is designed for compatible DT 4-pin wiring layouts. For Glass is Class Gen 2 installs, confirm that your lights and harness use matching DT 4-pin connectors before ordering. Technical details: Product type: DT 4-pin extension wire SKU: DD4098 Length: 1 meter Connector layout: 1 male DT connector and 1 female DT connector Wire size: 14AWG Connector type: DT 4-pin Operating voltage listed by Diode Dynamics: 9–16V Operating temperature listed by Diode Dynamics: -40C to 85C Installation time listed by Diode Dynamics: 5–10 minutes Tools listed by Diode Dynamics: None Modification listed by Diode Dynamics: None Listed shipped weight: 0.5 lb Important voltage note: Diode Dynamics lists this extension at 9–16V. For 24V Glass is Class Gen 2 builds, confirm the full harness and wiring setup before installing. Build Quality / Materials / Warranty / Trust Signals Diode Dynamics lists this extension with heavy-duty 14AWG wire, standard DT 4-pin connectors, over-molded connector bodies, and a 3-year replacement limited warranty. For BTS customers, the value is simple: this turns a generic DT extension into a practical Gen 2 watermelon light wiring add-on. It helps customers expand and route their Glass is Class Gen 2 installs without cutting into the harness. What’s Included 1x Diode Dynamics DD4098 DT 4-Pin Extension Wire, 1m G) Frequently Asked Questions About The DD4098 1m DT 4-Pin Extension Does the DD4098 work with Glass is Class Gen 2 watermelon lights? Yes, it is intended for compatible DT 4-pin Glass is Class Gen 2 wiring setups. Confirm your lights, harness, and splitter use matching DT 4-pin connectors before ordering. What is the DD4098 used for? The DD4098 adds 1 meter of extension length between compatible DT 4-pin wiring connections. It helps place Gen 2 lights farther from the relay harness or splitter. Is this extension plug-and-play? Yes, when used with compatible DT 4-pin connectors, the DD4098 is a plug-and-play extension wire. No cutting or splicing is required for a matching setup. Should I choose the 1m DD4098 or the 3m DD4099? Choose the DD4098 when the light is close but needs a little extra wire length. Choose the DD4099 when you need a longer run, such as routing across a vehicle, toward the rear, or through a larger custom lighting layout. Can I use multiple extensions together? Avoid stacking extensions without checking current draw, voltage drop, and harness limits. For longer layouts, choose the correct extension length and confirm the full setup before installation. Will this work with older Glass is Class lights? Older hardwired Glass is Class lights may not use the same DT 4-pin connector. This extension is intended for compatible Gen 2 DT 4-pin setups. Can I use this on a 24V truck? Do not assume this extension is 24V compatible. Diode Dynamics lists this extension at 9–16V, so 24V builds should be confirmed before installation.

DD4098 1m DT 4-Pin Extension For Gen 2 Watermelon Lights

USD 14.95
Dual Function Glass Watermelon Flush Mount Kit – Dark Amber

Dual Function Glass Watermelon Flush Mount Kit – Dark Amber

USD 36.00
Base Mounting Gasket For Grakon 1000 Style Cab Lights

Base Mounting Gasket For Grakon 1000 Style Cab Lights

USD 5.00
Watermelon Glass Marker Light Lens – Clear (5 Pack)

Watermelon Glass Marker Light Lens – Clear (5 Pack)

USD 49.00
Alpha Six Switch – 6‑Gang Remote‑Controlled Switch Panel

Alpha Six Switch – 6‑Gang Remote‑Controlled Switch Panel

USD 250.00
Foam Gasket For Cab Light

Foam Gasket For Cab Light

USD 3.00
Select your currency
USD United States (US) dollar
CAD Canadian dollar