Alpha Series Legacy 9012/HIR2: product and installation guide
Alpha Series Alpha-L9012 is a Legacy 9012/HIR2 LED bulb pair with I-Driver control. This clearance item is final sale with no returns or refunds, and the exact product record has no included warranty.
- SKU: Alpha-L9012
- Bulb designation: 9012/HIR2
- Package: Two Legacy 9012 LED bulbs
- Control: Smart I-Driver
- Electrical feature: CANBUS-ready design; verify the actual circuit
- Warranty: No included warranty
- Sale terms: Clearance item – final sale – no returns/refunds
Compare the installed bulb marking, connector, retainer and available space before removing the original lamp. Test the appropriate lighting functions and check the final beam aim after fitting. A bulb-base match alone does not establish suitability for every housing or lighting circuit.
Frequently Asked Questions
How many bulbs come with Alpha-L9012?
The listed package contains two Legacy 9012 LED bulbs, with the integrated CANBUS system and plug-and-play wiring input.
Does this clearance 9012 pair have a lifetime warranty?
No. The exact Alpha-L9012 product record specifies no included warranty. A warranty on a newer 9012 product does not transfer to this Legacy pair.
What are the return terms for the Legacy 9012 pair?
The existing notice states CLEARANCE ITEM – FINAL SALE – NO RETURNS/REFUNDS. Verify the bulb and housing requirements before ordering.
Can I assume this has the same output as A1010 or another 9012 SKU?
No. Match the exact Legacy SKU. A lumen, voltage or wattage figure on a different 9012 product is not a specification for Alpha-L9012.
Does this bulb product replace a complete factory LED headlight?
It is intended for a compatible serviceable-bulb application. A factory LED assembly can have integrated electronics and light sources that do not use a replaceable bulb of this type. Inspect the installed equipment first.
Will these bulbs prevent every dashboard warning or flicker?
Results depend on the actual lighting circuit and connections. Diagnose any warning or flicker before selecting an additional module, and check the physical lamp application separately.
What should I check before fitting this bulb?
Compare the mounting and retaining arrangement, connector and space behind the lamp. The original dust cap must fit correctly, and cooling parts or attached electronics need adequate clearance. Check the final beam aim after installation.
