Morimoto HD 40W Load Resistor with 9006 Input
The Morimoto H281.2 HD load resistor is an automotive lighting accessory for installations requiring an additional electrical load. It features a 9006 male input and nickel-plated ring terminal output.
Selecting the correct resistor requires matching its resistance, power rating and connections to the lighting circuit. This component is not a universal solution for bulb warnings, LED hyperflash or CANbus compatibility.
Aluminum Housing with Integrated Mounting Points
The extruded aluminum housing serves as both the outer shell and heat sink. Integrated mounting points allow the resistor to be secured to a metal surface with screws, as required by the supplier’s installation guidance.
The housing has an anodized finish with laser-engraved identification.
High-Temperature Wiring and Terminal Connections
The supplier specifies 14-gauge high-temperature wiring. Ceramic ports at the housing ends and additional heat-shrink shielding help protect the wiring near heated surfaces.
Connections consist of a 9006 male input and nickel-plated ring terminal output. Confirm that this arrangement matches the intended installation before ordering.
Installation and Heat Management
Load resistors become hot during operation. The supplier requires mounting this resistor to a metal surface with screws. Do not use double-sided tape as the mounting method.
Follow the supplied installation guidance and confirm suitable placement, wiring and circuit requirements before use. Mounting screws are not listed among the included components.
Technical Specifications
- Brand: Morimoto
- Part number: H281.2
- Product type: HD load resistor
- Listed power rating: 40W
- Resistance: Requires confirmation; supplier title states 11.25 ohms, while specifications state 7.5 ohms
- Input: 9006 male
- Output: Nickel-plated ring terminal type
- Wiring: 14-gauge high-temperature
- Housing: Extruded aluminum
- Finish: Anodized and laser engraved
- Mounting: Integrated mounting points; screw mounting to metal required
- Quantity: One resistor
Application Compatibility
The supplier references LED hyperflash and CANbus applications, but its description covers multiple resistor configurations. Those general references do not establish compatibility with every vehicle or confirm that H281.2 will resolve a particular lighting fault.
Confirm the correct resistance value and exact vehicle/circuit application before purchase or installation.
What’s Included and Warranty
- One Morimoto HD load resistor
- Installation reminder card
- 2-year warranty, subject to applicable coverage terms and exclusions
FAQs
Is this resistor sold individually or as a pair?
It is sold individually. The supplier lists one Morimoto HD load resistor per package.
Is this an 11.25-ohm or 7.5-ohm resistor?
The supplier listing is inconsistent: its title states 11.25 ohms, while its features and specifications state 7.5 ohms. Confirm the correct value for part H281.2 before ordering.
What connections does it have?
The supplier lists a 9006 male input and a nickel-plated ring terminal output.
Will this fix LED hyperflash or a bulb warning?
It may be suitable where the circuit requires an additional load, but a fix is not guaranteed. The correct resistance and vehicle-specific circuit requirements must be confirmed first.
Does the resistor get hot?
Yes. Load resistors generate heat during operation. The supplier requires mounting this unit to a metal surface with screws.
Can I mount it with double-sided tape?
No. The supplier explicitly requires screw mounting to a metal surface.
Are mounting screws included?
Mounting screws are not listed. The package contents specify one resistor and an installation reminder card.
What warranty is included?
The supplier lists a 2-year warranty. Confirm the full coverage terms, exclusions and claim requirements.














