MORIMOTO LF640 · TYPE S5
Check Type S5 fitment before installation
Compare the original lamp with Morimoto’s drawings, then plan access, connections and aiming for the matching vehicle.
1. Identify the matching assembly
Start with the exact year, model and body-style requirements in the LF640 fitment table. Quattro and body-style qualifications matter: an S5 model name alone does not identify this lamp.
Original-part references: VW2592115, VW2593115, 8T0941699E and 8T0941700 E.
3. Check housing depth and rear clearance


Compare the space behind the original lamp, the mounting ears and access to the aim adjuster. Use the service procedure for your exact bumper and trim when removing or refitting them.
4. Match the connection

The product specification lists an H11 male input and a supplied plug-and-play harness. Compare the original plug, seals and locking arrangement. If terminal positions need to be checked, use the vehicle’s wiring information.
5. Fit, test and aim
On a confirmed matching application, use the original mounting locations and the vehicle’s service instructions. Test both lights, check for bulb warnings or flicker and set the fog-light aim using the integrated height adjusters before completing reassembly.
If the lamp or connector differs from these references, confirm the application before continuing. Optional error cancellers or adapters should be chosen only after the original electrical system is checked.
Return to the matching product
Compare automotive fog-light assemblies. Each lamp family has its own fitment requirements.


