White fog lighting in the Type S5 mounting pattern
MORIMOTO XB LED · LF640 · ONE PAIR
Replace matching factory halogen fog assemblies on the listed Audi and Volkswagen applications with a pair of integrated LED projector fog lights. The LF640 combines 5500K White output, a black surround and height adjustment in the Type S5 housing.
- One pairTwo complete fog lights
- 5500K WhiteFixed main-light colour
- H11 maleInput connection
- 10 yearsManufacturer limited warranty

Match the vehicle and original fog assembly
| Vehicle | Listed years | Required qualification |
|---|---|---|
| Audi A4/S4 | 2009–2011 | Quattro only |
| Audi A5/S5 | 2008–2011 | Quattro only |
| Audi A5/S5 Cabriolet | 2010–2012 | Cabriolet body style |
| Audi A6 | 2012–2016 | Match original fog assembly |
| Audi Q3 | 2015–2017 | Match original fog assembly |
| Volkswagen CC | 2009–2012 | Match original fog assembly |
Quattro and body-style qualifications matter: an S5 model name alone does not identify this lamp. Compare the original part number, mounting ears and connector before ordering.
Reference numbers: VW2592115, VW2593115, 8T0941699E and 8T0941700 E.
Integrated aiming and a complete housing
The powder-coated aluminum housing acts as a heat sink, while a UV-resistant polycarbonate lens covers the optic. Matching applications use the original mounting points; integrated height adjusters allow the fog-light aim to be set after installation.

Morimoto specifies an H11 male input and supplies the listed plug-and-play harness. Match the factory plug, seals and locking arrangement before connecting the lamps.
A dedicated fog-light beam
Three Nichia LEDs per side provide fixed 5500K White light. Morimoto rates each lamp at 1,200 raw lumens, or 2,400 raw lumens for the pair. This is the manufacturer’s raw rating, not a measured on-road output result.

The projector optic spreads the light into a fog pattern. This fixed White pair has no native Yellow or switchback selection.
Use the original drawings before dismantling the vehicle
Compare the front, side and rear geometry with your original lamps. The illustrated guide also shows the rear connectors and helps you plan access and aiming checks.
Open the illustrated LF640 fitment and installation-planning guide
Vehicle-specific bumper access, fasteners and wiring-pin checks must follow the vehicle’s service information. After fitting, test both lamps and set their aim. Diagnose any bulb warning or flicker before selecting additional electrical hardware.
Specifications and warranty
| SKU / quantity | LF640 / one pair |
| Light source | Three Nichia LEDs per side; 5500K White |
| Manufacturer intensity | 1,200 raw lumens per lamp |
| Input | H11 male |
| Housing / lens | Powder-coated aluminum / UV-resistant polycarbonate |
| Aiming | Integrated height adjuster |
| Warranty | 10-year manufacturer limited warranty; modifications, alterations and misuse excluded |
Warranty claims remain subject to Morimoto’s terms. Document any problem found during installation and contact BTS before removing the lamps.
Before you order
Is this a bulb or a complete fog-light pair?
LF640 supplies two complete LED fog-light assemblies, the two listed bezels and harness.
Does an Audi model badge alone establish fitment?
No. Use the exact year and body-style qualifications above, then compare the original part number and mounting geometry.
Can I select Yellow output?
No. This product has fixed 5500K White output. Optional film is a separate accessory.
When can I plan installation?
Use the current availability shown on this BTS product page. Confirm availability with BTS before booking an installation if your timing is critical.

















