White fog lighting in a complete Type B6/B7 housing
MORIMOTO XB LED · LF642 · ONE PAIR
Replace matching factory halogen fog lights on the listed Audi and Volvo applications with two integrated LED projector assemblies. The LF642 pair combines 5500K White light, a black surround and adjustable aiming in the specific B6/B7 mounting pattern.
- One pairLeft and right fog lights
- 5500K WhiteFixed main-light colour
- H11 inputMatch the original connection
- 10 yearsManufacturer limited warranty

Check the body style and lamp geometry
| Vehicle | Manufacturer-listed years | Required check |
|---|---|---|
| Audi A4 B6 | 2000–2004 | Original fog-lamp shape and mounting pattern |
| Audi A4 B6 Avant | 2001–2004 | Original fog-lamp shape and mounting pattern |
| Audi A4 B6/B7 Cabriolet | 2002–2009 | Original fog-lamp shape and mounting pattern |
| Audi A4 B7 Avant | 2004–2007 | Original fog-lamp shape and mounting pattern |
| Volvo C30 | 2007–2013 | Original fog-lamp shape and mounting pattern |
| Volvo S40 | 2004–2012 | Original fog-lamp shape and mounting pattern |
Match the exact body style, lamp geometry and original part number before ordering. This kit replaces an existing matching fog-light assembly.
Reference numbers: VW/Audi 8E0941699B and 8E0941700B; Volvo 30698627, 31213175, 8648094, 30698628, 31213176 and 8648095. Other VW applications require a confirmed physical match; a similar connector alone is insufficient.
Factory mounting points, integrated aiming
The complete assemblies use the original mounting locations on matching applications. Their powder-coated aluminum housings also act as heat sinks; the front lenses are UV-resistant polycarbonate. Integrated height adjusters allow aiming after installation.

The manufacturer specifies an H11 male input and includes the plug-and-play harness. Compare your original connector before installation. Vehicles with bulb monitoring may require additional electrical hardware after the original system is checked.
A dedicated fog-light optic
Three Nichia LEDs per side produce a manufacturer-rated 1,200 raw lumens per lamp (2,400 raw lumens for the pair). Raw LED output is not a measured on-road lumen result. The projector optic is intended to spread light across the fog-light pattern.

This SKU supplies fixed 5500K White output. It has no selectable Yellow beam, switchback mode or separate backlight.
What the LF642 pair includes
- Two Morimoto XB LED Type B6/B7 fog-light assemblies.
- Two exterior-grade ABS plastic bezels.
- The listed plug-and-play wiring harness.
Error cancellers, wiring adapters, dielectric grease and Yellow film are sold separately.

Plan the installation around your original lamps
Use the original front, side and rear drawings to compare mounting geometry before dismantling the vehicle. Access and fasteners vary by model and bumper. Follow the vehicle’s service procedure for removal and refitting; the fog-light drawings do not specify bumper access, torque values or wiring pin locations.
Open the illustrated LF642 fitment and installation-planning guide
After fitting, confirm both lights work correctly and have the fog-light aim set for the vehicle. If a bulb warning or flicker occurs, diagnose the vehicle’s monitoring system before choosing additional electrical hardware.

Specifications and warranty
| SKU / quantity | LF642 / one pair |
|---|---|
| Light source | Nichia LEDs, 5500K White |
| Manufacturer-rated intensity | 1,200 raw lumens each; 2,400 raw lumens per pair |
| Input | H11 male |
| Housing | Powder-coated aluminum |
| Lens | UV-resistant polycarbonate |
| Aiming | Integrated height adjuster |
| Manufacturer warranty | 10-year limited warranty; modifications, alterations and misuse excluded |
Warranty claims remain subject to Morimoto’s terms. Contact BTS if a problem is found during installation so the condition can be documented before removal.
See the Audi XB LED fog lights
Morimoto’s short Audi XB LED overview shows the product in use. It is not a bumper-removal or wiring-pinout tutorial. Watch on YouTube.
Before you order
Is this a bulb replacement or a complete fog light?
It is a pair of complete LED fog-light assemblies. It replaces matching factory fog housings, not just the bulbs inside them.
Does the B6/B7 kit fit every Audi A4?
No. Use the exact body-style and year table, then compare the original part number and mounting geometry. An A4 badge by itself does not establish fitment.
Can I choose Yellow?
No. LF642 is a fixed 5500K White pair. Film is a separate accessory, not a native Yellow output option on this product.
Are an error canceller and adapter included?
No. The manufacturer lists those as optional products. Whether they are suitable depends on the vehicle’s original connection and bulb-monitoring system.















