Why Choose Morimoto XB Type Mopar Projector LED Fog Lights
Morimoto XB Type Mopar Projector fog lights are complete LED replacement housings designed to upgrade supported factory halogen fog lights. They deliver a controlled projector beam, clean white output, and a direct-fit design using the factory fog light locations.
Features include:
- Complete LED projector fog light housings
- Three Nichia LEDs per side
- 5500K white output
- Approximately 1,200 raw lumens per side
- Approximately 2,400 raw lumens total
- Plug-and-play harness included
- Integrated height adjusters
- DOT, SAE, and ECE listed compliance
- 10-year limited warranty
Key Features & Benefits
5500K White LED Output
Each fog light uses three Nichia LEDs to produce a crisp white beam.
Features include:
- 5500K color temperature
- Approximately 1,200 raw lumens per side
- Approximately 2,400 raw lumens total
- Clean modern LED appearance
- Wide fog light beam pattern
This gives compatible Chrysler, Dodge, and Jeep models a cleaner front-end look with stronger fog light performance.
Projector-Based Fog Beam
The XB LED fog lights use projector optics to control and distribute light properly.
Features include:
- Super-wide fog light beam
- Smooth light distribution
- Better control than basic LED bulb swaps
- Purpose-built fog light housing design
These are complete fog light assemblies, not LED bulbs installed into the original halogen housings.
Plug-and-Play Installation
These fog lights are designed to install using factory-style mounting and wiring on supported Mopar applications.
Features include:
- Plug-and-play harness included
- Factory-style fog light connectors
- Stock mounting location compatibility
- Rubber seals, pigtails, and connectors included
- Integrated height adjusters for aiming
OEM brackets are not included. Reuse the stock brackets during installation.
Performance, Compatibility & Use Case
Known Vehicle Compatibility
These Morimoto XB Type Mopar Projector LED fog lights fit Chrysler Town & Country 2013-2016, Chrysler 300 2013-2014, Chrysler 200 2013-2017, Jeep Grand Cherokee 2014-2019, Dodge Avenger 2013-2014, Dodge Grand Caravan 2014-2018, Dodge Dart 2014-2016, and Dodge Challenger 2014-2021.
Fitment Notes
Chrysler 200 models from 2015-2017 require optional resistors and splitters.
OEM brackets are pictured in some product references but are not included. Reuse your stock brackets for installation.
OEM Replacement Part Number
These fog lights are listed to replace Mopar part number 5182021AB.
Always confirm fitment by vehicle year, trim, factory fog light style, stock bracket condition, and OEM part number before ordering.
Application & Use Case
Designed for:
- Chrysler fog light upgrades
- Dodge fog light upgrades
- Jeep fog light upgrades
- Factory halogen fog light replacement
- White LED fog light conversions
- Complete projector fog light housing upgrades
- Daily-driven Mopar vehicles
These are a strong choice for drivers who want better beam control and a cleaner LED appearance than a basic fog light bulb swap.
Installation & Technical Details
Installation Overview
Morimoto XB Type Mopar Projector fog lights are designed to replace the original halogen fog light housings on supported Chrysler, Dodge, and Jeep applications.
Installation details:
- Product type: Complete LED fog light housing set
- Morimoto type: Type Mopar Projector
- Output color: White
- Color temperature: 5500K
- LED type: Nichia
- LED count: 3 LEDs per side
- Output: Approximately 1,200 raw lumens per side
- Total output: Approximately 2,400 raw lumens
- Wiring: Plug-and-play harness included
- Aiming: Integrated height adjusters
- Brackets: Reuse OEM brackets
- Optional accessory: Yellow Lamin-X Film Kit
Professional installation is recommended, especially for Chrysler 200 2015-2017 applications requiring optional resistors and splitters.
Build Quality, Compliance & Warranty
Build Quality
Morimoto XB LED fog lights are built as complete replacement housings with durable exterior components.
Key details:
- Durable polycarbonate lens
- Powder-coated cast aluminum housing
- Housing doubles as LED heat sink
- Protected internal components
- Projector-based fog light optics
The cast aluminum housing helps protect the internals while supporting LED cooling.
Compliance
These fog lights are listed as meeting:
- DOT standards
- SAE standards
- ECE standards
Proper installation and aiming are important for safe road use and compliance.
Warranty Coverage
This Morimoto product includes a 10-year limited warranty.
What’s Included
Included in the kit:
- 2 × Morimoto XB LED Type Mopar Projector Fog Lights
- 1 × Plug-and-Play Harness
- Optional Yellow Lamin-X Film Kit, if selected
Note: OEM brackets are not included. Reuse stock brackets.
Frequently Asked Questions About Morimoto XB Type Mopar Projector LED Fog Lights
Are these fog lights sold as a pair?
Yes. This kit includes one pair of Morimoto XB LED Type Mopar Projector fog lights.
It includes both fog light housings for a complete left and right side upgrade.
What vehicles do these fog lights fit?
These fog lights fit select Chrysler, Dodge, and Jeep models, including certain Town & Country, 300, 200, Grand Cherokee, Avenger, Grand Caravan, Dart, and Challenger applications.
Always confirm your year, trim, factory fog light style, and OEM part number before ordering.
Do these fit the Jeep Grand Cherokee?
Yes. These fog lights are listed for Jeep Grand Cherokee 2014-2019.
Confirm your factory fog light style and OEM part number before ordering.
Do these fit the Dodge Challenger?
Yes. These fog lights are listed for Dodge Challenger 2014-2021.
Fitment should still be confirmed by year, trim, and factory fog light setup.
Does the Chrysler 200 need extra parts?
Some Chrysler 200 models do. The 2015-2017 Chrysler 200 requires optional resistors and splitters.
Those parts are not listed as included in the standard kit.
Are OEM brackets included?
No. OEM brackets may be pictured, but they are not included.
Reuse your stock brackets during installation.
Are these complete fog lights or just bulbs?
These are complete LED projector fog light housings.
They replace the supported factory fog light assemblies instead of simply installing LED bulbs into the original halogen housings.
What color is the output?
These Morimoto XB LED fog lights produce 5500K white output.
That gives them a crisp, modern LED appearance.
Are these plug-and-play?
Yes. These fog lights include a plug-and-play harness for supported applications.
Some applications may require optional parts, such as the Chrysler 200 2015-2017 resistor and splitter setup.
What Mopar part number do these replace?
These fog lights are listed to replace Mopar part number 5182021AB.
Confirm this part number matches your factory fog light before ordering.
Are these DOT, SAE, and ECE compliant?
Yes. These Morimoto XB Type Mopar Projector LED fog lights are listed as meeting DOT, SAE, and ECE standards.
Proper installation and aiming are still required.
What warranty is included?
This Morimoto product includes a 10-year limited warranty.
