The Nitto Trail Grappler M/T in size LT265/75R16 is a mud-terrain radial tire with a 123/120P service description. The Trail Grappler M/T is Nitto’s mud-terrain option with an aggressive tread design for off-road use.
Size and wheel specifications
- Tire size: LT265/75R16
- Manufacturer stock number: 205440
- Wheel diameter: 16 in
- Nominal section width: 265 mm
- Load index / speed rating: 123/120P
- Load designation: Load Range E (10-ply rating)
- Approved rim-width range: 7.0–9.0 in
- Measuring rim width: 7.5 in
- Manufacturer-listed overall diameter: 31.89 in
- Manufacturer-listed overall width: 10.51 in
- Tread depth: 18.9/32 in
- Maximum load / inflation rating (single-tire application): 3,415 lb at 80 psi
Nitto lists this exact stock number at 31.89 inches overall diameter and 10.51 inches overall width on the 7.5-inch measuring rim. The measuring rim is the reference for those published dimensions; the approved rim-width range is 7.0–9.0 inches.
The 123/120 load index lists 123 for single-tire use and 120 for dual-tire use. These ratings apply to different installation arrangements. The maximum-load figure above is the single-tire rating; do not use it as a dual-installation capacity.
Before ordering
Compare the complete size, load index and speed rating with your vehicle’s approved requirements. Confirm wheel width, wheel load capacity and clearance as well as diameter. A tire’s dimensions do not establish an OEM vehicle application. If changing tire size or type, have the combination and operating pressure checked by a qualified tire professional.
Questions about LT265/75R16
What do the numbers in LT265/75R16 mean?
The size uses a nominal 265 mm section width and an aspect ratio of 75; the sidewall height is expressed as a percentage of that nominal width. R denotes radial construction and 16 is the wheel diameter in inches. Nitto lists this exact tire at 31.89 inches overall diameter and 10.51 inches overall width on the 7.5-inch measuring rim. LT identifies the light-truck size designation.
What wheel width is approved for this LT265/75R16 tire?
Nitto lists 7.0–9.0 inches as the approved rim-width range for stock number 205440. Its 7.5-inch measuring rim is the reference for the published dimensions, not the only approved width. The wheel must also have the correct 16-inch diameter and be suitable for the vehicle and required load.
Does Load Range E mean this tire contains 10 physical plies?
No. Load Range E corresponds to a 10-ply rating, a load/strength classification rather than a count of physical cord layers. This tire’s service description is 123/120P. The load index is 123 in a single-tire application and 120 in a dual-tire application; P is the speed symbol.
Is 80 psi the pressure I should run in this tire?
No. The listed 3,415 lb at 80 psi is Nitto’s maximum load/inflation rating for a single-tire application. It is not a recommended pressure for every vehicle. Follow the applicable vehicle and tire guidance, and have the operating pressure confirmed when changing tire size, type or load requirements.
Will this LT265/75R16 tire fit any vehicle with 16-inch wheels?
No. A matching 16-inch wheel diameter is only one requirement. Check the approved 7.0–9.0-inch rim-width range, complete 123/120P service description, wheel load capacity and vehicle clearance. The published 31.89-inch diameter is useful for comparison, but does not prove vehicle fitment or that a lift or modification is unnecessary.
