BTS Lighting
Four RetroBright lamps for a matching Peterbilt 359 headlight setup

Details
Fitment, contents and installation
Four RetroBright lamps for a matching Peterbilt 359 headlight setup
This BTS kit supplies four Holley RetroBright 5.75-inch round LED headlights: two Hi/Lo lamps for the low-beam positions and two dedicated high-beam lamps. Choose Classic White or Modern White; each colour selection contains the complete four-light set.
Choose the colour and check the component numbers
| Kit colour | Low-beam positions | Dedicated high-beam positions |
|---|---|---|
| Classic White, 3000K | 2 × LFRB125 Hi/Lo lamps | 2 × LFRB126 high-beam lamps |
| Modern White, 5700K | 2 × LFRB145 Hi/Lo lamps | 2 × LFRB146 high-beam lamps |
Classic White has a warmer appearance; Modern White has a cooler white appearance. Colour temperature is not a brightness measurement. The Hi/Lo lamps can perform both beam functions, while the dedicated high-beam lamps serve the high-beam positions only.
Confirm the installed housings and wiring
For a Peterbilt 359, match the truck’s actual 5.75-inch round headlight arrangement, retaining hardware and available bucket depth. A truck that has been converted to a different lamp format needs the kit matching its current housings. The kit replaces the lamps; it does not include complete outer headlight housings.
The listed lamps use 9–18V DC input and H4 connections. Verify the low/high/ground pinout and the dedicated high-beam connection against the truck. Bucket depth, retaining rings, switched-ground circuits and previous wiring changes can affect installation; do not assume every sealed-beam conversion is plug-and-play.
Construction and service
RetroBright combines a traditional sealed-beam appearance with polycarbonate lenses, cast-aluminium housings and replaceable LED cartridges. These versions use a left-hand-drive beam pattern. Match replacement service parts to the exact lamp number and colour.
Kit contents and warranty
One order supplies four lamps in the selected colour: two Hi/Lo and two dedicated high-beam units. Confirm any required wiring adapters and retaining hardware for the existing installation. Holley lists a limited two-year warranty for the RetroBright lamps, subject to its current terms and exclusions.
Questions before ordering
Do I need to order four kits to replace four lamps?
No. One kit supplies the four lamps listed in the table. Select the colour and order one kit for a matching four-lamp arrangement.
Can I fit this kit to any Peterbilt 359?
Confirm the actual 5.75-inch round housings, bucket clearance, retaining hardware and wiring. Model name alone does not establish that a previous owner has kept the original headlight setup.
What should I check after installation?
Verify low and high beams, secure the retaining hardware and wiring, and set the headlight aim for the completed installation.
Compare compatible headlight options
Browse Peterbilt 359 Headlights and compare the listed housing, wiring and beam functions for your truck.
Installation reference
Check each lamp circuit
Verify the main Hi/Lo and dedicated high-only circuits separately. Connector shape alone does not confirm the low/high/ground pinout. Match the exact lamp components and retainers before installation; an adapter is not promised with every lamp revision.
Related options































