Why Upgrade to Supercharged Drivers?
Factory Drivers Are Intentionally Limited for DOT Compliance
Your XB Evo headlights are engineered to meet DOT / FMVSS108 standards in the U.S. and Canada. To achieve compliance, the standard LED drivers intentionally under-power the Bi-LED projectors to keep output just below regulated peak intensity limits.
That means your headlights are operating at roughly 50% of their full potential output.
For daily driving on public roads, that’s perfect.
For off-road, backcountry, ranch, logging, snow-plow, oilfield, or overland use? You may want more.
Key Features & Benefits
30-50% Increase in Light Output
The LF2-DRVSC20 Supercharged drivers increase both low beam and high beam intensity by approximately 30-50% over standard DOT-spec drivers.
-
Brighter down-road visibility
-
Stronger peripheral illumination
-
Improved high-speed off-road confidence
-
Ideal for rural, desert, forest, and backcountry environments
If you’re building a serious off-road Ram 2500 or 3500, this is the performance upgrade.
Direct Bolt-On Replacement
These are true plug-and-play driver replacements:
-
Remove factory DOT drivers
-
Install Supercharged drivers in the same location
-
Reconnect factory multi-pin harness
No cutting. No splicing. No reprogramming.
Installation takes minutes during headlight install or after.
Compatible with XB Evo Series Only
Designed specifically for:
-
LF2-520
-
LF2-520Y
-
LF2-520R
Compatible with:
-
XB Evo
-
XB Evo Hybrid
-
XRGB Evo Ram headlights
They are not universal LED boosters and will not work with other headlights.
No Impact to Reliability or Warranty
Even though output increases significantly, these drivers remain within the safe operating range of the Nichia LEDs used in XB Evo headlights.
-
No overheating risk
-
No reduced lifespan
-
Does not void Morimoto’s 5-year warranty
-
Designed, engineered, and tested in the USA
You get maximum output without sacrificing long-term durability.
Color-Coded Status Indicators
Troubleshooting is simple thanks to integrated LED indicators:
-
Red – DRL / switched ignition power
-
Green – Low beam circuit active
-
Blue – High beam circuit active
If something isn’t functioning properly, diagnostics are quick and straightforward.
Hybrid Welcome Sequence Upgrade
When installed on XB Evo Hybrid headlights, these drivers also activate the full projector + DRL welcome sequence that is not normally enabled on that version.
More performance. More style.
On-Road vs Off-Road Use (Important Compliance Notice)
DOT Compliant (Standard Drivers)
XB Evo headlights are fully DOT compliant when using factory drivers.
NON-Compliant With Supercharged Drivers
Installing Supercharged drivers:
-
Exceeds DOT / FMVSS108 peak intensity limits
-
Is not legal for on-road use in the USA or Canada
-
Is intended for off-road use only
Once installed, output cannot be reduced back to compliant levels without reinstalling the original DOT drivers.
If you operate your Ram in Canada, the northern U.S., or anywhere on public roads, these drivers should only be used in off-road configurations.
Installation Details
-
Direct replacement for standard XB Evo drivers
-
Mounts to rear of headlight housing
-
Uses factory multi-pin connector
-
Includes mounting screws and grease packet
-
No reprogramming required
Estimated install time: 5–10 minutes per headlight.
Build Quality & Warranty
-
Power Rating: 1,500mA
-
Output Boost: 30–50% increase
-
Logic-controlled circuitry
-
Designed and engineered in the USA
-
Backed by Morimoto’s 5-Year Limited Warranty
Warranty valid only when purchased through an authorized dealer.
What’s Included
-
2x Supercharged LED Drivers (LF2-DRVSC20)
-
8x Mounting Screws
-
1x Packet Dielectric Grease
Frequently Asked Questions About Morimoto Supercharged Drivers
Are these legal to use on the street in Canada or the USA?
No. Installing the Supercharged drivers results in non-compliant intensity levels. They are for off-road use only in both the United States and Canada.
How much brighter are they compared to standard drivers?
They increase low and high beam output by approximately 30–50% over stock DOT-spec drivers.
Will they damage my headlights?
No. The boosted power remains within safe operating limits of the Nichia LEDs. They do not negatively impact reliability when used properly.
Can I switch back to street-legal mode later?
Yes. Reinstall the original DOT drivers to return the headlights to compliant intensity levels.
Do they work with all Morimoto headlights?
No. They are compatible only with:
-
LF2-520
-
LF2-520Y
-
LF2-520R
XB Evo, XB Evo Hybrid, and XRGB Evo Ram headlights.
Do they improve winter visibility?
Yes — increased beam intensity improves penetration in snow, blowing snow, and rural environments. However, remember they are not street legal when installed.
