MORIMOTO EVO HYBRID · LF2-520Y
A clean white signature. Purpose-built truck lighting.
A complete left/right Evo Hybrid headlight pair for your 2009–2018 Ram / 2019–2024 Ram 1500 Classic. Fixed white daytime running lights and fade-off turn signals keep the choice straightforward, with optics built for the exact application.
- Left + rightOne complete headlight pair
- Fixed white DRLsFade-off signals
- Dual Bi-LED opticsIn each headlight
Canadian-spec Ram: the exact installation guide requires separately sold LF2-520HCA adapters at both headlight inputs. Confirm the correct adapter package before ordering.

LIGHT WITH A PURPOSE
Dual Bi-LED optics, built into a matched pair.
Optics for the application
Two Bi-LED projectors in each housing provide low and high beam. This Hybrid does not include the separate D-Optic high-beam assist fitted to the corresponding XB Evo.
A complete assembly upgrade
Both housings and the listed installation hardware are supplied. This is a headlight-pair replacement, not a bulb conversion.
Aim is part of installation
Set the beam aim after fitting the lamps. Factory mounting points do not guarantee correct aim, especially when the truck’s ride height has changed.

LOOK AT THE STATED COMPARISON
Low and high beam, side by side
Morimoto’s Ram-family graphics compare the stated original lamps and Evo configurations. These are manufacturer comparisons, not an independent BTS test. Driver labels describe the test configuration; they do not establish overall XRGB road compliance.


YOUR FRONT-END SIGNATURE
Fixed white. Clean fade-off signals.
This Hybrid uses fixed white daytime running lights and amber fade-off turn signals. It does not include configurable DRL keys, lens heating or a standard startup welcome sequence.
Morimoto identifies a welcome sequence with the optional Supercharged drivers on this exact application. Those drivers remain an off-road-only configuration.

CHOOSE THE FEATURES YOU WANT
Compare the matching Evo family
This listing is the LF2-520Y Evo Hybrid. Other versions are separate products, with different lighting functions and compliance details. On smaller screens, swipe across the table to compare every column.
| Feature | XB Evo | XRGB Evo | XB Evo Hybrid |
|---|---|---|---|
| Daytime running lights | White / amber selectable | RGB app + white / amber modes | Fixed white |
| Turn signals | Sequential or fade-off selectable | Sequential or fade-off selectable | Fade-off |
| Lens heating | Frost-Free; driver-requested | Not included | Not included |
| Standard welcome sequence | Included | Included | Not included |
| Main optics | Dual Bi-LED + D-Optic assist | Dual Bi-LED + D-Optic assist | Dual Bi-LED; no D-Optic assist |
| Manufacturer compliance | Standard-driver DOT/FMVSS108 configuration | Not DOT compliant | Standard-driver DOT/FMVSS108 configuration |
Supercharged drivers are optional and off-road only in Canada and the United States. Choosing white or amber DRLs does not make an XRGB assembly DOT compliant.
Compare LF2-520 heated XB Evo · Compare LF2-520R XRGB Evo

BEFORE YOU ORDER
Match the year, model and original lamps
| Vehicle | Manufacturer-listed application |
|---|---|
| Dodge Ram 1500 | 2009-2018 |
| Dodge Ram HD | 2009-2018 |
| Ram 1500 Classic | 2019-2024 |
Developed for North American left-hand-drive vehicles using right-hand traffic. Morimoto does not guarantee fitment outside North America.
The guide has separate original-reflector and original-projector wiring branches. Match your factory headlight connectors, not just the year on the registration.
This application includes the listed 2019–2024 Ram 1500 Classic; it is not a blanket fitment claim for the newer-body Ram 1500.
BOTH SIDES. THE MATCHED HARDWARE.
What is supplied

- Headlights: One Pair (1x Right Hand / Passenger Side Headlight, 1x Left Hand / Driver Side Headlight)
- Accessories: 1x Mini Fuse Tap, 1x Micro Fuse Tap, 1x DRL Harness, 2x Magnet-Mount Resistors, 2x OE Reflector Headlight Harnesses, 2x OE Projector Headlight Harnesses
Use the adapters and signal components appropriate to the truck’s original lighting. Optional Supercharged drivers and other accessories are separate selections; they are not required to complete the standard headlight pair.
LF2-520HCA is not included. Canadian-spec applications require that separate adapter.
FACTORY MOUNTING. CAREFUL WIRING.
Plan the installation, then set the aim
- Identify the truck’s original lighting equipment and follow the matching branch in the official guide.
- Mount both housings at the original locations and connect the specified input harnesses, resistors and DRL components.
- For Canadian-spec Rams, fit the separately sold LF2-520HCA adapter at each headlight input. Route the DRL wire and close the fuse-box cover as the Ram guide shows.
- Secure wires away from heat and moving parts, test every lighting function, then adjust beam aim.
The manufacturer also warns that non-OEM, non-Morimoto exterior lights can affect turn-signal behavior or cause hyperflash. Diagnose other lighting changes before assuming the new headlights are faulty.
Download the official LF2-520 model-family installation guide
The shared guide includes heated Evo instructions, but lens-heater activation does not apply to this nonheated Evo Hybrid.
AN OPTIONAL OFF-ROAD CONFIGURATION
Choose the matching Supercharged pair
The matching optional accessory is LF2-DRVSC20. Standard LED drivers are already included. The optional pair replaces them when you select the Supercharged configuration.
For this exact application, Morimoto describes approximately 30% greater low/high-beam intensity. That is the manufacturer’s comparison, not a BTS measurement or a guarantee in every condition.
The optional drivers also enable a multistage welcome sequence on this Hybrid, according to its exact manufacturer description.

THE EXACT LF2-520Y CONFIGURATION
Specifications and replacement references
| Detail | Manufacturer specification |
|---|---|
| Traffic Pattern | LHD / Right Hand Traffic Only |
| Output (Standard Drivers) | DOT (FMVSS108) Compliant (LB2V and UB2) |
| Output (Supercharged Drivers) | Off-Road use only |
| Main Optics | 2x Type 1 Ishida Optic Bi-LED (1x Nichia NC4W193F @ 750mA) |
| Functions | Low, High, Park, Turn, DRL |
| Turn Signal Mode | Instant On / Fade-Off |
| DRL Color | White |
| Internal Finish | Piano Black |
| Side marker | Amber side reflex reflector (DOT compliant) |
| Lens Details | Polycarbonate with proprietary anti-UV hard coating |
Original-equipment replacement references
55277409AD, 55277409AE, 55277409AF, 55277410AD, 55277410AE, 55277410AF, 68001485AG, 68001484AG, 68096439AC
Cross-check the references against the year, model and original lamp equipment above.
Morimoto provides a 5-year limited manufacturer warranty. Coverage, exclusions and return authorization follow the manufacturer’s current policy. Keep your proof of purchase and contact BTS before removing a lamp for a suspected warranty issue.
SEE THE DESIGN
Watch the official overview
Morimoto’s official Ram model-family presentation. Other versions may appear; use the exact package and specifications on this page for your selection.

The video loads only when you choose it. No autoplay. Product-family demonstrations may include other options; the exact package and compatibility notes on this page govern your selection.
CLEAR ANSWERS BEFORE CHECKOUT
Your Evo Hybrid questions
Is this one lamp or a complete pair?
One order supplies both driver-side and passenger-side headlight assemblies with the listed accessories.
Which trucks does this exact part fit?
2009–2018 Ram / 2019–2024 Ram 1500 Classic. Match the exact factory headlight type and the equipment-specific branch in the official guide.
What do I need for a Canadian-spec Ram?
The exact family installation guide requires LF2-520HCA at both headlight inputs, sold separately. Confirm the correct adapter package and your truck’s original reflector/projector equipment before ordering.
Does 2019–2024 fitment include every Ram 1500?
No. The listed application is the Ram 1500 Classic. Do not use that year range as a fitment claim for the newer-body Ram 1500.
Can I choose the DRL colour?
This Hybrid uses fixed white DRLs. Select the separate XB Evo for configurable white/amber DRLs.
Does this exact version have heated lenses?
No. This Evo Hybrid does not include lens heating, even though the model-family guide also covers heated Evo lamps.
Are the Supercharged drivers included?
No. Standard drivers are included. LF2-DRVSC20 is the exact optional Supercharged pair, for off-road use only in Canada and the United States.
Does this Hybrid have a welcome sequence?
The standard Hybrid does not. Morimoto identifies a multistage welcome sequence with the optional Supercharged drivers, which are for off-road use only.
What is the manufacturer’s road-use configuration?
Morimoto identifies the included standard-driver configuration as DOT/FMVSS108 compliant for its listed North American application. Optional Supercharged drivers exceed those intensity limits and are for off-road use only in Canada and the United States.
What warranty is included?
Morimoto lists a five-year limited manufacturer warranty. Keep proof of purchase and contact BTS for installation help or a suspected warranty issue.























