The Morimoto LF704 XB Hybrid headlight pair provides LED low/high beams and white daytime running lights while reusing the truck’s original turn-signal bulbs. It is listed for 2019–2024 Ram 2500/3500 with OEM halogen reflector headlights; OEM projector LED headlights are excluded.
Fitment and original equipment
- Ram 2500 and 3500 HD: 2019–2024 with OEM halogen reflector headlights and the original bulb-based turn signals.
- Not compatible with OEM projector LED headlights. The Hybrid application depends on retaining the original halogen/incandescent turn-signal bulbs.
- Left-hand-drive beam pattern. These housings were designed and tested on US-spec vehicles; confirm Canadian and other-market headlight, connector and DRL equipment.
Specifications and contents
| Part number | LF704 |
|---|---|
| Quantity | Two complete XB Hybrid headlights, one left/right pair |
| Low / high beam | Dedicated Kuria Optic LED low- and high-beam projectors |
| Daytime running light | White LED |
| Turn signal | Reuses original halogen/incandescent turn-signal bulbs; bulbs are not included |
| Manufacturer output rating | 3,000 raw lumens per headlight |
| Input / bezel / side marker | Mopar multi-pin / gloss and matte gunmetal gray / amber |
| Housing / lens | ABS plastic / UV-resistant polycarbonate |
| Included wiring | Plug-and-play harness, fuse tap and DRL modules |
Before installation
Confirm the OEM halogen reflector configuration and inspect the original turn-signal bulbs and sockets before transferring them. Install the supplied wiring, DRL modules and fuse tap as instructed. Test the separate DRL and headlight functions, check both turn signals, and adjust final beam aim.
Warranty
Morimoto 5-year limited warranty. Manufacturer terms and exclusions apply.
Product questions and answers
Which factory headlights does LF704 replace?
The application is 2019–2024 Ram 2500/3500 with OEM halogen reflector headlights. Morimoto excludes OEM projector LED headlights and specifies the original bulb-based turn signals for the Hybrid installation.
Are the turn-signal bulbs included?
No. The kit reuses the truck’s original halogen/incandescent turn-signal bulbs. Inspect the bulbs and sockets before moving them into the new housings.
Does Hybrid mean the low or high beam still uses a halogen bulb?
No. The low beam, high beam and white DRL use LEDs. The retained halogen/incandescent bulbs operate the turn signals; Hybrid describes that combination of lighting technologies.
Does 3,000 lumens refer to one headlight or the pair?
Morimoto specifies 3,000 raw lumens for each headlight. Raw lumen output is not a road illuminance measurement and does not establish how much light will reach a particular point after installation.
What wiring is supplied with the pair?
The listed package includes the plug-and-play harness, fuse tap and DRL modules. Those components do not replace the need for the correct factory headlight package or the original turn-signal bulbs.
Does LF704 include the same features as LF701 XB LED?
LF704 uses dedicated LED low- and high-beam projectors with the original turn-signal bulbs. LF701 is the separate triple Bi-LED model with integrated selectable turn signals. Their factory-lighting and adapter requirements also differ, so choose by exact part number and application.
What should Canadian owners confirm before fitting LF704?
Check the original halogen reflector headlights, turn-signal sockets and DRL control. Morimoto’s stated testing is for US-spec vehicles, so confirm the actual Canadian equipment before ordering and check beam aim after installation.
