MORIMOTO XB HYBRID · LF558
A fresh front end for your third-generation Ram.
Give the third-generation Ram a clean white daytime signature and purpose-built Bi-LED road lighting. LF558 replaces both housings while retaining the original incandescent turn-signal bulbs.
- Left + rightOne complete headlight pair
- White DRLsA fixed daytime signature
- LED opticsLow- and high-beam functions

THE LIGHTING SYSTEM, EXPLAINED
Three details that define this set
Integrated LED optics
A single three-inch Kuria Bi-LED projector in each housing provides both low- and high-beam functions.
Fixed white daytime signature
This exact part has a fixed white daytime running light. An amber turn signal does not mean the DRL colour is selectable.
Original turn-signal bulbs
The original incandescent turn-signal bulbs and sockets transfer into the new housings. Inspect them before reuse.

MATCH THE YEAR, TRIM AND ORIGINAL LAMPS
Exact vehicle and equipment fitment
| Check | This exact application |
|---|---|
| Vehicle | 2006–2008 Dodge Ram |
| Exact manufacturer part | LF558 |
| Package | Complete left and right headlight assemblies |
| Original lighting | Match the original headlight connections and DRL equipment |
| Turn signals | Original incandescent bulbs and sockets transfer |
| Traffic pattern | Left-hand-drive vehicles used in right-hand traffic |
The manufacturer’s application was developed on US-spec vehicles. Confirm the actual connectors and DRL equipment on Canadian or other-market vehicles before ordering.
THE STANDARD HEADLIGHT PACKAGE
What comes with the pair

- Headlights: 2x (One Pair) 06-08 Dodge Ram XB Hybrid LED Headlights
- Wiring: Plug and Play Harness, Fuse Tap
Use the adapters and signal components appropriate to the truck’s original lighting. Any optional accessories are separate selections; the listed standard installation parts are supplied with the headlight pair.
Tail lights, fog lights, roof lights, bumpers, wheels and other vehicle accessories shown in photographs are separate selections.
PLAN THE ACCESS AND WIRING
Installation details worth knowing
Transfer and inspect the original incandescent turn-signal bulbs and sockets. Use the standard wiring and separate DRL feed supplied with the exact LF558 set, then test all functions and adjust the beam aim. International DRL equipment can differ: have BTS confirm the correct setup for your truck rather than applying a generic DRL-disabling instruction.
Use the instructions supplied with the exact LF558 set. Contact BTS if the guide is missing or the supplied connectors differ from the truck.
Other aftermarket signal lights or LED bulb conversions can affect signal operation. Test the full lighting system before final reassembly. Follow the exact guide and the vehicle’s own fuse information.

EXACT PART · LF558
Technical specifications
| Detail | Manufacturer specification |
|---|---|
| INTENSITY | 3,400lm (Raw; each) |
| TRAFFIC PATTERN | LHD Only |
| INPUT | Delphi H13 (Main) |
| BEZEL COLOR | Gloss / Matte Black |
| SIDEMARKER | Amber |
| MATERIAL | ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens) |
| OPTIC | Single Kuria Optic Bi-LED (3" Lens) |
| UV COATING | Momentive UVHC3000 |
The 3,400-lumen figure is raw output per headlight, not road lux or a rating for the pair.
Original-equipment replacement references
50693B, 55077794AD, 68001484AH, 68001485AH
Use these together with the model-year and equipment requirements above.
Morimoto identifies the supplied standard configuration as meeting its stated DOT / SAE requirements when installed and aimed correctly. This does not establish compliance or fitment for unverified drivers or modified applications.
Morimoto provides a 5-year limited manufacturer warranty. Coverage, exclusions and return authorization follow the manufacturer’s current policy. Keep your proof of purchase and contact BTS before removing a lamp for a suspected warranty issue.
SEE THE DESIGN
Watch the official product videos
Manufacturer-linked video for this headlight. The exact written model, DRL colour and current fitment above govern this product selection.
2006 – 2008 Dodge Ram XB Hybrid LED Headlights | By Morimoto Lighting

Choose a video to load it. No autoplay. Historical launch or availability statements are not current BTS stock information; the written part-specific details govern this selection.
CLEAR ANSWERS BEFORE CHECKOUT
Your XB Hybrid questions
Is this one headlight or a pair?
One order supplies complete left and right headlight housings and the listed standard wiring.
Which vehicle does this exact part fit?
2006–2008 Dodge Ram. Match the original lamp equipment and the detailed fitment table before ordering.
Are these replacement bulbs?
No. These are complete replacement headlight assemblies with integrated LED optics.
Do I keep the original turn-signal bulbs?
Yes. This Hybrid transfers the original incandescent bulbs and sockets. Inspect them before reuse.
Can I change the daytime running-light colour?
This exact part has a fixed white daytime running light. An amber turn signal does not mean the DRL colour is selectable.
Do I need to adjust the aim?
Yes. Finish the vertical alignment after mounting and testing. Lift, load and ride height can change where the beam lands.
Can I add Supercharged drivers?
Compatibility has not been established for this exact LF558 headlight. Do not assume that a driver sold for a newer Evo model fits this assembly.
What warranty applies?
Morimoto lists a five-year limited manufacturer warranty. Terms and exclusions apply. Keep proof of purchase and contact BTS if an issue occurs.
What does LHD mean?
The beam pattern is for left-hand-drive vehicles used on the right-hand side of the road. It does not mean only the driver-side headlight is supplied.
Does LF558 also fit a 2009 Ram HD?
The exact manufacturer listing used here is 2006–2008. Do not extend it to 2009 merely because a truck looks similar.
THE FINISHED LOOK
See the design on the vehicle
Original manufacturer photography. Other lighting and vehicle accessories are separate products.




























