United Pacific · 32926 / 32927
Projector beams with a switchable sequential signal
This black headlight pairs H9/H1 halogen main beams with a 28-LED position light and 15-LED amber signal. A switch lets the installer turn the sequential signal function on or off.
H9 low / H1 high
The low beam uses a 65W H9 halogen bulb and the high beam a 55W H1 halogen bulb.
Switchable sequence
Use the switch shown in the manual to select sequential or non-sequential signal operation.
28-LED position light
The LED position light is separate from the halogen road beams.

Fitment & selection
Match the original headlight
- Peterbilt 579: 2012–2021
- Peterbilt 587: 2012–2016
For a 2010–2011 Peterbilt 587, confirm the original assembly and connections with BTS before ordering.
| Driver | 32926 · one complete assembly |
|---|---|
| Passenger | 32927 · one complete assembly |
Installation & aiming
The manual identifies the sequential-function on/off switch and the combined high/low-beam adjuster. A removable load resistor is pre-installed; United Pacific instructs removal if it causes dimming or failure to illuminate.
Lighting details
Specifications per assembly
| Low beam | H9 halogen · 65W at 12V |
|---|---|
| High beam | H1 halogen · 55W at 12V |
| Position / signal | 28 LEDs / 15 amber LEDs |
| Signal control | Switchable sequential function |
| Finish | Black Inner Housing |
| Package | One headlight assembly for the selected side |
| Manufacturer standards listing | DOT/SAE · FMVSS 108; correct application and installed aim are required |
Product questions
Before you order
Does the price include both headlights?
No. Each option supplies one complete headlight for the selected side. Choose both sides separately if you need a pair.
Which model years should I check?
Use the exact application list above and match the original housing, mounting and connector. Confirm any year outside that list with BTS before ordering.
Are the main beams LED?
No. This family uses the main-beam bulb types listed above. Its LED position, DRL or signal functions are separate.
Can the sequential signal be switched off?
Yes. The installation manual shows an on/off switch for the sequential turn-signal function.
2-year manufacturer warranty
United Pacific lists a 2-year warranty for these exact part numbers. Keep your purchase information and contact BTS Lighting for product support.




















