DIODE DYNAMICS · 2019–2025 TOYOTA RAV4
Add a proper fog-light system to your RAV4.
A matched left/right pair of Elite lamps and RAV4 bezels, with the complete add-on harness for vehicles without original fog lights. Choose fixed White, fixed Yellow or a Dual Color version with selectable White and Yellow.
- TWO ELITE LAMPSMatched left/right pair
- THREE CHOICESWhite · Yellow · Dual Color
- ADD-ON SYSTEMWithout factory fogs
- AMBER ACCENTSeparate backlight function
PURPOSEFUL LIGHTING
A kit built around the job
A defined fog beam
Elite optics put a wide fog beam low on the road with a controlled upper edge. Aim the lamps after installation and follow applicable road-use requirements.
Choose fixed or selectable colour
Single-colour White and Yellow versions stay the chosen colour. The separate Dual Color SKU lets you choose White or Yellow through its power-cycle controls; it is not two simultaneously operating main beams.
The correct wiring package
The DD4110 harness supplies power, lighting-trigger inputs and a cabin switch. With its switch enabled, the lamps follow the connected activation signal; the high-beam trigger disables the main output. Amber backlighting is separate.
CHECK THE VEHICLE FIRST
Exact fitment and mounting
| Check | This kit |
|---|---|
| Vehicle | 2019–2025 Toyota RAV4 without original fog lights. |
| Excluded trims | TRD Off-Road and Adventure. |
| Lamp mounting | Type B left/right Elite lamps with RAV4 bezels. |
| Vehicle equipment | Factory LED accent lighting, if fitted, is disabled. |
| Wiring package | DD4110 complete add-on harness. |
MATCH THE SKU TO YOUR SELECTION
Choose White, Yellow or Dual Color
| Kit SKU | Output | Colour | Pattern / function |
|---|---|---|---|
| DD8817 | Elite | Cool White (6000K) | SAE Fog |
| DD8818 | Elite | Yellow (3000K) | SAE Fog |
| DD9005 | Elite | Dual Color (6000K White / 3000K Yellow) | SAE Fog |
White is 6000K and Yellow is 3000K. Dual Color selects either main-beam colour using the kit’s fog-light control after the add-on wiring is installed. With the harness enabled and the fog circuit powered, cycle the fog lamps on and off three times, keeping each state between half a second and five seconds. The lamps cycle through the colours twice. Leave them on for at least five seconds when the preferred colour appears to save it. Without a selection after two cycles, they return to White. Amber backlighting is separate and switches off while the main fog beam is active. Dual Color uses a representative White-kit photograph; the selected SKU identifies the lamps supplied.
WHAT THE KIT SUPPLIES
The parts belong together
- Two Type B Elite fog lamps, one left and one right, in the selected colour configuration
- Two DD8816 RAV4 bezels
- One DD4110 complete add-on wiring harness
- Mounting hardware and installation guide
This is one complete pair, not all three colour choices together. Match the vehicle’s original equipment before ordering: add-on and replacement kits have different wiring. Other vehicle accessories shown are separate.
MOUNT · WIRE · AIM
Plan the installation before you begin
Remove the required bumper-cover and fender fasteners, fit the bezels and lamps, and install the add-on power harness. Route its cabin-control wiring through the factory firewall grommet and switch blank as instructed. Complete the power, control and optional backlight connections, then secure the wiring, reassemble the trim and aim the lamps.
Follow the illustrated add-on guide
The shared manufacturer RAV4 overview covers both add-on and replacement kits. Use the add-on harness procedure for a vehicle without factory fog lights; it is not simply a connection to an existing fog plug. For Dual Color control sequences, follow the current included instructions rather than assuming an older video covers the new control mode.
UNDERSTAND THE EXACT HARDWARE
Technical specifications
| Detail | This kit |
|---|---|
| Kit quantity | Two Elite lamps with the mounting and wiring parts listed above. |
| Main beam | White 6000K; Yellow 3000K; Dual Color selects either. |
| Backlight | Amber; 0.3 W / 14 lm per lamp. Off while main fog beam is active. |
| Operating voltage | 9–16 V DC. |
| Nominal beam | 80° × 6° fog pattern. |
| Lamp intrusion rating | IP68; preserve sealed connections. |
| Connector | Deutsch DT-style. |
| Road-use qualification | Manufacturer SAE J583 / F3 fog specification; proper installation, aiming and local rules apply. |
| Warranty | 8-year limited manufacturer coverage for the Elite lamps. Wiring and accessories have separate terms. |
Output by option
| Main-beam configuration | Power per lamp | Measured / raw lumens per lamp | Peak intensity per lamp |
|---|---|---|---|
| Fixed White | 17 W | 680 / 1,850 lm | 10,200 cd |
| Fixed Yellow | 15 W | 560 / 1,650 lm | 8,700 cd |
| Dual Color — White mode | 13.2 W | 590 / 1,500 lm | 12,900 cd |
| Dual Color — Yellow mode | 13.5 W | 400 / 1,250 lm | 9,200 cd |
Warranty by exact kit SKU
| SKU | Option | Manufacturer warranty |
|---|---|---|
| DD8817 | Cool White (6000K) | 8-year limited manufacturer warranty; coverage and exclusions follow the manufacturer policy. |
| DD8818 | Yellow (3000K) | 8-year limited manufacturer warranty; coverage and exclusions follow the manufacturer policy. |
| DD9005 | Dual Color (6000K White / 3000K Yellow) | 8-year limited manufacturer warranty; coverage and exclusions follow the manufacturer policy. |
See the manufacturer warranty policy for eligibility, exclusions and claim instructions.
MANUFACTURER OUTPUT PHOTOGRAPHY
See the beam’s purpose
Compare the manufacturer’s beam photographs and choose the light for your route.
Manufacturer figures are per lamp, not per pair. Raw LED lumens and measured lamp lumens are different quantities. Candela measures peak intensity; lux values shown are at 10 metres. Beam photographs are illustrative rather than a controlled comparison of your vehicle or every available tier.
OFFICIAL DIODE DYNAMICS VIDEOS
See the installation and understand the light
Load a video when you are ready. No autoplay or video download is required to read this page.
No Fogs? No Problem. NEW 2019+ Toyota RAV4 Fog Kits | Diode Dynamics
RAV4 family overview covers add-on and replacement kits. This page supplies only the stated kit; follow its factory-fog requirement and the written installation instructions.
Diode Dynamics fog-light aiming
General fog-light aiming demonstration; follow the kit instructions and local aiming requirements.
Lumens, Lux, and Candela EXPLAINED | Diode Dynamics
General output terminology; not an exact-kit performance test.
CLEAR ANSWERS
Before you order
Which package should I choose?
Choose this add-on kit only if the vehicle has no factory fog lights. A vehicle with factory fogs needs the separate replacement kit.
Can the fixed White or Yellow version change colour?
No. Select the Dual Color SKU if you want selectable White and Yellow main-beam modes. The Amber accent is a separate function on the lamps.
Does the Amber backlight stay on with the fog beam?
No. The Elite backlight switches off while the main fog beam is on.
Does the installation retain the original LED accents?
On the add-on conversion, factory LED accents, if equipped, are disabled. Check the original bumper equipment and trim before ordering.
What warranty applies?
All three Elite lamp choices have an 8-year limited manufacturer warranty. The DD4110 harness has separate 3-year coverage. Eligibility, exclusions and manufacturer claim requirements apply; keep proof of purchase.
Are the kit photographs extra items I need to buy?
The listed kit contents are supplied. Other vehicle lighting and accessories in installation photographs are separate. Select the exact kit SKU and follow the notes under each photograph.
THE DETAILS MATTER
A closer look at the selected hardware
