Build the mounting foundation for your reverse lights
DD7373P · 2021–2023 Ford F-150
Mount compatible C1 or C2 2.0 reverse-light pods below the factory rear bumper using application-specific brackets. This is the mounting-only option for a truck that already has suitable lamps and wiring.
Brackets only. Lamps, wiring and the complete pod mounting hardware are separate. Excludes Tremor and Raptor.
A factory-bumper mounting location
- Vehicle
- 2021, 2022 or 2023 Ford F-150 with the supported factory rear bumper.
- Excluded trims
- Tremor and Raptor.
- Mounting
- Reuses the indicated underside bumper mounting bolts. Fit the appropriate universal pod brackets to the vehicle brackets.
- Package
- DD7373P vehicle mounting bracket kit. No lamps or wiring harness.
Check aftermarket bumper clearance and your lamp’s supplied bracket/hardware before ordering. This is separate from a hitch-receiver mount.
Need the complete lighting kit?
C1 complete kit
Two compact White Flood pods with red backlights, the vehicle mounts and reverse-light wiring. Choose Sport or Pro.
C2 2.0 complete kit
Two C2 2.0 White Flood pods with red backlights, matching mounts and wiring. Choose Sport or Pro.
See the mounting steps before you start
The illustrated guide shows the existing bumper bolts, bracket direction and pod mounting. Its electrical steps apply only when you also have the matching lamps and harness.
Open the F-150 reverse-light installation guide →
Diode Dynamics demonstrates the 2021–2023 F-150 mounting and wiring route. The video may show an earlier pod housing; follow the supplied hardware for your selected C1 or C2 2.0 kit.
Manufacturer warranty
Manufacturer warranty
Diode Dynamics provides a limited lifetime warranty for this product for eligible purchases from April 15, 2025. Commercial, industrial and fleet use is limited to 8 years. After the first 3 years, covered products require return for inspection and repair or replacement at the manufacturer’s discretion. Coverage applies to the specified lamp or component; bundled wiring and accessories follow their own published terms. Keep proof of purchase. Manufacturer approval and an RMA are required before return; labor and normal wear are excluded. Shipping obligations vary by location. See the manufacturer warranty terms for eligibility, exclusions and claim instructions.
Warranty applies to the purchased bracket product under the manufacturer’s terms. It does not make separate lamps, wiring or installation labour part of this package.
