J.W. Speaker 8800 EVO-X • heated high beam • sold individually
A dedicated heated 4×6 high beam in black or chrome
The 8800 EVO-X high-beam family is built for forward reach, with SmartHeat lens heating and a 4×6-inch high-beam pattern. Each bezel selection is one high-beam lamp; it does not provide low beam.
Exact bezel-to-SKU selection
- Black bezel: JW-0562081
- Chrome bezel: JW-0562091
Dedicated high-beam role
Both current bezel choices are heated high-beam lamps. Select the bezel finish, then match the lamp to the vehicle’s high-beam position and required quantity.
Built for exposed service
Hard-coated clear polycarbonate lens and polycarbonate housing, with manufacturer-listed IEC IP67 and IP69K environmental protection.
Product details
Electrical and installation details
Both current family entries are dedicated high-beam lamps designed to retrofit 1A1 and 2A1 4×6 sealed-beam positions.
Voltage
- 12–24V DC input
- 9–32V DC operating range
- Operating temperature: −40°C to 65°C
Connection
- Integrated 10-inch 6-pin Deutsch-to-H4 lead
- H4 mating connector: AMP 172615-2
- Confirm vehicle pinout, polarity and available mounting depth
Manufacturer-listed standards
ECE Reg 10, ECE Reg 149-HR, FMVSS 108 s10.1 Table XVIII, SAE J1383, IEC IP67 and IEC IP69K are listed for this high-beam family. Final installation and use still depend on the vehicle and local requirements.
Before ordering
Select by high-beam position and sealed-beam setup
A 4×6 opening alone does not establish fitment. Confirm the correct high-beam position, connector and pinout, bucket depth, traffic pattern, system voltage and required lamp quantity. Vehicle wiring changes or adapters may be required.
Need the complementary heated low-beam lamp? Compare the 8800 EVO-X low-beam family.
Package contents
What is included
Included: one heated 4×6 high-beam lamp in the selected black or chrome bezel.
A low-beam lamp, vehicle-specific adapters and mounting hardware are not stated as included.
Questions before ordering
Frequently asked questions
Does this lamp provide low beam?
No. JW-0562081 and JW-0562091 are high-beam-only lamps. Choose the separate 8800 EVO-X low-beam family for low-beam positions.
Is this listing for a pair?
No. Each selected variation is one high-beam lamp. Confirm how many high-beam positions the vehicle uses.
What voltage systems do these high-beam lamps support?
Both bezel choices have a 12–24V DC input rating and a 9–32V DC operating range. Confirm the vehicle system and connection before ordering.
What does the heated lens do?
SmartHeat is intended to help keep the lens clear of snow and ice in cold conditions.
Is it plug-and-play in every 4×6 vehicle?
No. The lamp includes a Deutsch-to-H4 lead, but the vehicle connector, pinout, polarity, bucket depth and mounting arrangement still need to match.
Warranty
Two-year limited warranty
J.W. Speaker lists a two-year limited manufacturer warranty for the Model 8800 family. Coverage is subject to the manufacturer’s warranty terms and exclusions.
