Lamin-X LMX2-531 · clear pre-cut set
Protect your 4Runner XB Evo lenses
Clear film cut for the Morimoto XB Evo and XB Evo Hybrid headlight shapes on 2014–2024 Toyota 4Runner. Match LF2-531 or LF2-531Y before ordering.
A protective layer over the lens
The clear film adds a replaceable layer against everyday road debris and wear. The LMX2-531 set is made for these Morimoto housings, not the original Toyota headlights or a different aftermarket design.
The photographs show representative Lamin-X material and tools. Your supplied film is the model-specific pre-cut set.
Fit it carefully
Apply film to 4Runner XB Evo headlights
Check the cut with its backing attached, prepare the lens and follow the illustrated application guide.
Application demonstration
General technique demonstrated on an Audi Q7, not the 4Runner lens or LMX2-531 cut.
Questions before you order
Which headlights does this film fit?
Morimoto LF2-531 XB Evo and LF2-531Y XB Evo Hybrid for 2014–2024 Toyota 4Runner. Check the headlight model rather than the truck year alone.
Does it change the output colour?
This is clear protective film, not yellow or smoked tint.
What warranty applies?
Lamin-X provides a five-year limited product warranty for manufacturing defects including cracking, fading or yellowing, with proper installation and care. Replacement film is covered under its terms; installation labour is not.
Build your 4Runner lighting plan
Shop 2014–2024 4Runner lighting · Read the 4Runner lighting upgrade guide
