BTS LIGHTING · FIFTH-GENERATION 4RUNNER
2014–2024 Toyota 4Runner lighting upgrades
Find headlights, fog lights, trail lighting and replacement bulbs for the facelift fifth-generation 4Runner. Each product keeps its own year, trim and equipment requirements. Earlier 2010–2013 headlight assemblies and 2025+ products are a separate fitment.
Read the 4Runner lighting buying guide for help choosing the right starting point.
Three checks before you choose
- Identify the original headlights: 2014–2020 halogen; 2021 has two LED-equipped branches; 2022–2024 uses LED low and high beams. Inspect modified vehicles rather than relying on the badge.
- Check trim and front-end equipment: Limited/Nightshade, TRD Pro and Toyota Safety Sense can change the bracket application.
- Check what is included: a bracket, harness or bulb pair is not a complete lamp kit. Product-page choices show the current configuration and price.
Headlights
Start with the original lamp type. The 2021 equipment split matters, and the heated Evo and nonheated Hybrid are different products.
Check the listed year and trim
Morimoto XB Evo Heated LED Headlights — 2014–2024 Toyota 4Runner (Pair)
LF2-531 heated Evo pair; use included adapters and current factory-equipment branch. Do not buy legacy XB adapters for an Evo installation.
Check the listed year and trim
Form Lighting 2014-2024 Toyota 4Runner Sequential LED Projector Headlights (pair)
Confirm factory halogen, LED-low/halogen-high or LED-low/LED-high equipment and use the product’s included connection route.
Check the listed year and trim
Morimoto Toyota 4Runner (14-24) XB Evo Hybrid LED Headlights
LF2-531Y Evo Hybrid pair is not heated. Use included equipment-specific adapters; the legacy XB adapters are separate.
Fog lights
Choose a complete fog-lamp assembly or a matched pod kit. Beam colour, backlight colour and the optical pattern are different choices.
Check the listed year and trim
Diode Dynamics Elite Series Type B Fog Lamps (pair)
Toyota Type B replacement; all 4Runner trims including Limited, TRD Pro and ORP. Main-beam choice and DRL colour are separate.
Check the listed year and trim
Toyota SS3 LED Fog Light Kit
Type B bracket and factory fog opening; all trims. Separate Amber backlight uses the 4Runner wiring route, not the Tacoma wire colours.
Check the listed year and trim
Morimoto Toyota XB Evo LED Fog Lights
LF092 Type T White Evo fog pair. Match the factory fog housing and connector; preserve its broader Toyota fitment.
Check the listed year and trim
Morimoto XB LED Fog Lights: Type T (White Output / Set)
LF220 Type T White fog pair. Original fog mounting/connector required; not an off-road Driving-pattern lamp.
Check the listed year and trim
Morimoto XB LED Fog Lights: Type T (Amber Output / Set)
LF222 Type T Amber fog pair. Original fog mounting/connector required.
Check the listed year and trim
Morimoto XB Evo+ Fog Lights: Type T (White + Yellow / Set)
LF093 Type T Evo+ White/Yellow pair; switching and aiming follow its own original instructions.
Check the listed year and trim
Diode Dynamics SS3 Dual Color Type B Kit SAE Fog
Type B bracket and factory fog opening; all trims. Separate Amber backlight uses the 4Runner wiring route, not the Tacoma wire colours.
Check the listed year and trim
Morimoto 4Banger 2.0 Complete Fog Light Kit for 2012–2023 Toyota Tacoma
Type T 4Banger SAE Wide pair with matched brackets. Four NCS/HXB and White/Yellow choices; confirm the original fog mounts and connectors.
Grille lights and light bars
The bumper, trim and Toyota Safety Sense equipment decide which brackets can be used. Confirm those details before choosing output.
Check the listed year and trim
Toyota 4Runner 2014-2024 | SS5 Stealth Grille LED Pod Kit
Excludes Limited and Nightshade. The optional fifth centre pod cannot be used with Toyota Safety Sense equipment.
Check the listed year and trim
Toyota 4Runner 2014-2019 | Stealth Lightbar Kit
Excludes Limited and Nightshade. This legacy SS30 package is not the current universal SS30 family.
Check the listed year and trim
Diode Dynamics Stage Series SAE/DOT LED Lightbar Kit for 2014-2024 Toyota 4Runner
All listed 2014–2019 trims; 2020–2024 TRD Pro only. Match Driving or Fog optics to the intended use.
Check the listed year and trim
Morimoto 14-24 Toyota 4Runner XBG LED DRL Grille
XBG36 grille for the source-listed 2014–2024 application; use the factory-headlight and year-specific wiring branches.
Ditch lights
Vehicle-specific hood-hinge brackets place auxiliary lights beside the windscreen. Choose the complete lamp package or clearly identified brackets-only option.
Check the listed year and trim
Toyota 4Runner 2010-2024 Stage Series Backlit Ditch Light Kit
2010–2024 4Runner hood-hinge brackets. Choose the exact lamp or brackets-only package on the product page.
Check the listed year and trim
Morimoto 2Banger Ditch Light Kit for 2014–2024 Toyota 4Runner
Complete pair with 4Runner mounting brackets and a harness. Choose the listed performance, beam and output colour on the product page.
Check the listed year and trim
Morimoto 4Banger 2.0 Ditch Light Kit for 2014–2024 Toyota 4Runner
Complete pair with 4Runner mounting brackets and a harness. Match the beam pattern to its intended off-road use.
Tail, brake, mirror and plate lighting
Compare complete assemblies with function modules. Lens finish, required factory lamps and optional add-ons remain separate decisions.
Check the listed year and trim
Form Lighting 2010-2024 Toyota 4Runner LED Tail Lights (pair)
2010–2024 assembly; choose Red or Smoked lens on the product page.
Check the listed year and trim
Morimoto Toyota 4Runner (10-24) XB LED Tail Lights (Gen II) (Red)
2010–2024 LF738 Red-lens pair. Optional BoostBar and its wiring are separate.
Check the listed year and trim
Morimoto 10-24 Toyota 4Runner XB LED Tail Lights (Smoked)
2010–2024 LF739 Smoked-lens pair. Optional BoostBar and its wiring are separate.
Check the listed year and trim
Morimoto X3B LED Third Brake Light for Toyota 4Runner and Related Applications
X3B70 includes 2010–2024 4Runner; broader Toyota applications remain distinct. Follow the 4Runner-specific illustrated installation.
Check the listed year and trim
Diode Dynamics Tail-as-Turn Kit for 2014–2024 Toyota 4Runner
USDM factory tail lamps. Stage 2 XPR backup-bulb package excludes TRD Pro and TRD Off Road; modules-only and Stage 1 are distinct choices.
Check the listed year and trim
FORM LED License Plate Lights for 2014–2024 Toyota 4Runner (Pair)
Complete pair of FORM White LED license-plate assemblies; not replacement bulbs.
Check the listed year and trim
FORM Sequential LED Mirror Lights for Toyota 4Runner / RAV4 (Pair)
Requires factory mirror turn-signal lamps. Complete Smoked-lens Amber-sequential pair; wider RAV4 identity is retained.
Check the listed year and trim
Morimoto XB LED Mirror Lights for 2014–2024 Toyota 4Runner / 2013–2018 RAV4
Requires the source-specified factory mirror lamp arrangement.
Reverse and hitch lighting
Choose a dedicated reverse kit, wiring harness or universal hitch/bar solution. A wiring-only product does not include lamps.
Universal installation
Diode Dynamics HitchMount LED – 3-in-1 Hitch Light for 2″ & 2.5″ Receivers
Requires a compatible open-back hitch receiver and supported trailer connector, with factory tail lamps retained. Check the exact C1/C1R package.
Check the listed year and trim
Toyota 4Runner 2010-2024 Stage Series Reverse Light Kit
2010–2024 4Runner reverse kit; select SSC1 or C2 2.0 and Sport or Pro on the product page.
Universal installation
Universal Backup Light Boost Bar Morimoto
Universal LED700 Boost Bar. Use a supported Boost-enabled Morimoto tail-light output or the documented tapped wiring; not automatically included with a tail-light pair.
Check the listed year and trim
Diode Dynamics Stage Series Reverse Light Wiring Harness for 2010-2024 Toyota 4Runner
Vehicle-specific reverse wiring harness only; lamps and mounting hardware are separate unless the selected product explicitly includes them.
Roof lighting and universal bars
The DEK rack is vehicle-specific. Prinsu/Sherpa and universal CrossLink bars require their own rack, width and mounting checks.
Universal installation
Diode Dynamics SS5 CrossLink 5-Pod LED Light Bar-Sport 40Watts
Universal five-pod 31.5-inch CrossLink bar. Requires a suitable mount and exact wiring; no implied 4Runner bracket inclusion.
Universal installation
Diode Dynamics SS5 CrossLink 5-Pod LED Light Bar-Pro 90Watts
Universal five-pod 31.5-inch CrossLink bar. Requires a suitable mount and exact wiring; no implied 4Runner bracket inclusion.
Universal installation
Diode Dynamics SS5 CrossLink 6-Pod LED Light Bar-Sport 40Watts
Universal six-pod 37.5-inch CrossLink bar. Requires a suitable mount and exact wiring; no implied 4Runner bracket inclusion.
Universal installation
Diode Dynamics SS5 CrossLink 6-Pod LED Light Bar-Pro 90Watts
Universal six-pod 37.5-inch CrossLink bar. Requires a suitable mount and exact wiring; no implied 4Runner bracket inclusion.
Universal installation
Diode Dynamics SS5 CrossLink Lightbar Kit for Prinsu/Sherpa Roof Racks
Requires a compatible Prinsu/Sherpa rack and wind deflector: six-pod width at least 41 5/8 in; seven-pod width at least 47 7/8 in. Vehicle year alone does not establish fit.
Universal installation
Diode Dynamics SS10 LED Chase Light
Universal chase light: requires a suitable mount and correct fused wiring. Chase input has priority over reverse; it is not a bolt-on 4Runner kit.
Check the listed year and trim
Diode Dynamics x Kuat DEK Roof Rack with Lighting for 2010–2024 Toyota 4Runner
Exact 2010–2024 DEK rack and selected lighting package. Preserve the product’s rack, mounting and load limits; 2025+ rack is separate.
Universal installation
Diode Dynamics SS5 CrossLink Mounting and Support Bracket Kit for Prinsu/Sherpa Roof Racks
Requires a compatible Prinsu/Sherpa rack and wind deflector: six-pod width at least 41 5/8 in; seven-pod width at least 47 7/8 in. Vehicle year alone does not establish fit.
Rock lights
These are universal kits and components. Plan the lamp count, safe cable routing, fused supply and controller before ordering.
Universal installation
Diode Dynamics RGBW LED Rock Light (8 Pack)
Confirm the mounting, wiring and package contents for your installation. The requirements are listed below.
Fitment and quantities
- Universal rock-light components and kits. Match individual lamps, harness/control pieces and package quantities; not a vehicle-specific kit.
- Universal RGBW rock-light package. Confirm the controller, wiring and number of pods before installation.
Universal installation
Morimoto Rock Light Kit: Color Changing RGB (4 pc)
Universal Morimoto rock-light kit; preserve White/RGB and the exact pod count. Custom mounting and wiring required.
Universal installation
Morimoto Rock Light Kit: White (4 pc)
Universal Morimoto rock-light kit; preserve White/RGB and the exact pod count. Custom mounting and wiring required.
Universal installation
Morimoto Rock Light Kit: White (8 pc)
Universal Morimoto rock-light kit; preserve White/RGB and the exact pod count. Custom mounting and wiring required.
Universal installation
Morimoto Rock Light Kit: White (6 pc)
Universal Morimoto rock-light kit; preserve White/RGB and the exact pod count. Custom mounting and wiring required.
Universal installation
Morimoto Rock Light Kit: Color Changing RGB (6 pc)
Universal Morimoto rock-light kit; preserve White/RGB and the exact pod count. Custom mounting and wiring required.
Universal installation
Diode Dynamics Stage Series Single-Color LED Rock Light Kit (8-pack)
Confirm the mounting, wiring and package contents for your installation. The requirements are listed below.
Fitment and quantities
- Universal single-colour rock lighting; custom mounting and fused wiring required. Preserve the selected number of lamps.
- Universal rock-light components and kits. Match individual lamps, harness/control pieces and package quantities; not a vehicle-specific kit.
Universal installation
Diode Dynamics RGBW Rock Light Installer Kit w/Controller (8-pack)
Confirm the mounting, wiring and package contents for your installation. The requirements are listed below.
Fitment and quantities
- Universal rock-light components and kits. Match individual lamps, harness/control pieces and package quantities; not a vehicle-specific kit.
- Universal RGBW rock-light package. Confirm the controller, wiring and number of pods before installation.
Universal installation
Diode Dynamics RGBW Rock Light Installer Magnet Mount Kit (8-pack)
Confirm the mounting, wiring and package contents for your installation. The requirements are listed below.
Fitment and quantities
- Universal rock-light components and kits. Match individual lamps, harness/control pieces and package quantities; not a vehicle-specific kit.
- Universal RGBW rock-light package. Confirm the controller, wiring and number of pods before installation.
Universal installation
Diode Dynamics RGBW Rock Light Installer Magnet Mount Kit w/Controller (8-pack)
Confirm the mounting, wiring and package contents for your installation. The requirements are listed below.
Fitment and quantities
- Universal rock-light components and kits. Match individual lamps, harness/control pieces and package quantities; not a vehicle-specific kit.
- Universal RGBW rock-light package. Confirm the controller, wiring and number of pods before installation.
Universal installation
Diode Dynamics Dual-Color Rock Light M8 8-Pack
Universal rock-light components and kits. Match individual lamps, harness/control pieces and package quantities; not a vehicle-specific kit.
Universal installation
Diode Dynamics Dual-Color Rock Light M8 Magnet 8-Pack
Universal rock-light components and kits. Match individual lamps, harness/control pieces and package quantities; not a vehicle-specific kit.
Replacement bulbs and interior lighting
Match the original socket and function, then check whether the listing is one bulb, a pair, a board or a complete kit. Generic bulb listings retain their wider vehicle applications.
Check installed equipment
Diode Dynamics H8/H9/H11 SL2 LED Bulbs (pair)
Match the original bulb, lamp position, colour and package quantity. The supported applications are listed below.
Fitment and quantities
- H11 low-beam replacement only for original replaceable halogen bulbs. Does not replace sealed factory LED headlamps.
- Replaceable H11 halogen fog bulbs only. Check the installed socket; not a replacement for a sealed LED fog assembly.
Check installed equipment
Diode Dynamics H8/H9/H11 SL2 Pro LED Bulbs (pair)
H11 low-beam replacement only for original replaceable halogen bulbs. Does not replace sealed factory LED headlamps.
Check installed equipment
Diode Dynamics H11 HP48 LED Bulbs
Replaceable H11 halogen fog bulbs only. Check the installed socket; not a replacement for a sealed LED fog assembly.
Check installed equipment
Diode Dynamics H11 XP80 LED Bulbs
Replaceable H11 halogen fog bulbs only. Check the installed socket; not a replacement for a sealed LED fog assembly.
Check installed equipment
Diode Dynamics 7443 HP24 Switchback Dual-Color Turn Signal LED Bulbs
Match the original bulb, lamp position, colour and package quantity. The supported applications are listed below.
Fitment and quantities
- 7443 HP24 Switchback White/Amber function. Match the factory dual-intensity socket, wiring and load requirements; retain the product’s acknowledgment and wiring cautions.
- Match the front 7443 socket and required signal colour/function. Exact current source choices only; a colour option is not a street-use approval.
Check installed equipment
Diode Dynamics 921 HP36 LED Cool White (pair)
Replaceable 921 backup bulbs, sold as a pair. Keep generic bulb identity; verify the existing socket and clearance.
Check installed equipment
Diode Dynamics 921 XPR LED Cool White (pair)
Replaceable 921 backup bulbs, sold as a pair. Keep generic bulb identity; verify the existing socket and clearance.
Check installed equipment
Diode Dynamics 194 HP5 LED Cool White (pair)
Match the original bulb, lamp position, colour and package quantity. The supported applications are listed below.
Fitment and quantities
- Factory puddle-light application is listed only through 2016. Match the existing 194 socket; do not extend to 2017–2024.
- 194 replacement plate bulbs, sold as a pair. Separate from complete FORM plate-light housings.
- 194 map-light pair. White, Warm White and decorative interior colours remain separate product choices.
- 194 vanity-light pair. This is not the Tacoma 28 mm four-bulb vanity package.
- 194 door-light pair or the exact SMD12 board option. A board sold singly needs two for the source pair; confirm its supplied adapters and clearance.
- 194 side-marker replacement. Match the lamp’s required colour/function; decorative interior colours are not added to this application.
Check installed equipment
Diode Dynamics 194 HP3 LED Cool White (pair)
Match the original bulb, lamp position, colour and package quantity. The supported applications are listed below.
Fitment and quantities
- Factory puddle-light application is listed only through 2016. Match the existing 194 socket; do not extend to 2017–2024.
- 194 replacement plate bulbs, sold as a pair. Separate from complete FORM plate-light housings.
- 194 map-light pair. White, Warm White and decorative interior colours remain separate product choices.
- 194 vanity-light pair. This is not the Tacoma 28 mm four-bulb vanity package.
- 194 door-light pair or the exact SMD12 board option. A board sold singly needs two for the source pair; confirm its supplied adapters and clearance.
- 194 side-marker replacement. Match the lamp’s required colour/function; decorative interior colours are not added to this application.
Check installed equipment
Diode Dynamics 194 SMD2 LED Cool White (pair)
Match the original bulb, lamp position, colour and package quantity. The supported applications are listed below.
Fitment and quantities
- Factory puddle-light application is listed only through 2016. Match the existing 194 socket; do not extend to 2017–2024.
- 194 replacement plate bulbs, sold as a pair. Separate from complete FORM plate-light housings.
- 194 map-light pair. White, Warm White and decorative interior colours remain separate product choices.
- 194 vanity-light pair. This is not the Tacoma 28 mm four-bulb vanity package.
- 194 door-light pair or the exact SMD12 board option. A board sold singly needs two for the source pair; confirm its supplied adapters and clearance.
- 194 side-marker replacement. Match the lamp’s required colour/function; decorative interior colours are not added to this application.
Check installed equipment
Diode Dynamics 194 HP3 LED Pure White (pair)
Match the original bulb, lamp position, colour and package quantity. The supported applications are listed below.
Fitment and quantities
- 194 replacement plate bulbs, sold as a pair. Separate from complete FORM plate-light housings.
- 194 map-light pair. White, Warm White and decorative interior colours remain separate product choices.
- 194 vanity-light pair. This is not the Tacoma 28 mm four-bulb vanity package.
- 194 door-light pair or the exact SMD12 board option. A board sold singly needs two for the source pair; confirm its supplied adapters and clearance.
Check installed equipment
Diode Dynamics 194 HP5 LED Pure White (pair)
Match the original bulb, lamp position, colour and package quantity. The supported applications are listed below.
Fitment and quantities
- 194 replacement plate bulbs, sold as a pair. Separate from complete FORM plate-light housings.
- 194 map-light pair. White, Warm White and decorative interior colours remain separate product choices.
- 194 vanity-light pair. This is not the Tacoma 28 mm four-bulb vanity package.
- 194 door-light pair or the exact SMD12 board option. A board sold singly needs two for the source pair; confirm its supplied adapters and clearance.
Check installed equipment
Diode Dynamics 194 HP3 LED Natural White (pair)
Match the original bulb, lamp position, colour and package quantity. The supported applications are listed below.
Fitment and quantities
- 194 replacement plate bulbs, sold as a pair. Separate from complete FORM plate-light housings.
- 194 map-light pair. White, Warm White and decorative interior colours remain separate product choices.
- 194 vanity-light pair. This is not the Tacoma 28 mm four-bulb vanity package.
- 194 door-light pair or the exact SMD12 board option. A board sold singly needs two for the source pair; confirm its supplied adapters and clearance.
Check installed equipment
Diode Dynamics 194 HP5 LED Natural White (pair)
Match the original bulb, lamp position, colour and package quantity. The supported applications are listed below.
Fitment and quantities
- 194 replacement plate bulbs, sold as a pair. Separate from complete FORM plate-light housings.
- 194 map-light pair. White, Warm White and decorative interior colours remain separate product choices.
- 194 vanity-light pair. This is not the Tacoma 28 mm four-bulb vanity package.
- 194 door-light pair or the exact SMD12 board option. A board sold singly needs two for the source pair; confirm its supplied adapters and clearance.
Check installed equipment
Diode Dynamics 194 SMD2 LED Warm White (pair)
Match the original bulb, lamp position, colour and package quantity. The supported applications are listed below.
Fitment and quantities
- Factory puddle-light application is listed only through 2016. Match the existing 194 socket; do not extend to 2017–2024.
- 194 replacement plate bulbs, sold as a pair. Separate from complete FORM plate-light housings.
- 194 map-light pair. White, Warm White and decorative interior colours remain separate product choices.
- 194 vanity-light pair. This is not the Tacoma 28 mm four-bulb vanity package.
- 194 door-light pair or the exact SMD12 board option. A board sold singly needs two for the source pair; confirm its supplied adapters and clearance.
- 194 side-marker replacement. Match the lamp’s required colour/function; decorative interior colours are not added to this application.
Check installed equipment
Diode Dynamics 194 HP3 LED Warm White (pair)
Match the original bulb, lamp position, colour and package quantity. The supported applications are listed below.
Fitment and quantities
- Factory puddle-light application is listed only through 2016. Match the existing 194 socket; do not extend to 2017–2024.
- 194 replacement plate bulbs, sold as a pair. Separate from complete FORM plate-light housings.
- 194 map-light pair. White, Warm White and decorative interior colours remain separate product choices.
- 194 vanity-light pair. This is not the Tacoma 28 mm four-bulb vanity package.
- 194 door-light pair or the exact SMD12 board option. A board sold singly needs two for the source pair; confirm its supplied adapters and clearance.
- 194 side-marker replacement. Match the lamp’s required colour/function; decorative interior colours are not added to this application.
Check installed equipment
Diode Dynamics 194 HP5 LED Warm White (pair)
Match the original bulb, lamp position, colour and package quantity. The supported applications are listed below.
Fitment and quantities
- Factory puddle-light application is listed only through 2016. Match the existing 194 socket; do not extend to 2017–2024.
- 194 replacement plate bulbs, sold as a pair. Separate from complete FORM plate-light housings.
- 194 map-light pair. White, Warm White and decorative interior colours remain separate product choices.
- 194 vanity-light pair. This is not the Tacoma 28 mm four-bulb vanity package.
- 194 door-light pair or the exact SMD12 board option. A board sold singly needs two for the source pair; confirm its supplied adapters and clearance.
- 194 side-marker replacement. Match the lamp’s required colour/function; decorative interior colours are not added to this application.
Check installed equipment
Diode Dynamics 9005 SL2 / SL2 Pro bulb and anti-flicker pair package
9005 halogen high-beam bulbs plus the specified anti-flicker pair. 2021 LED-low/halogen-high vehicles only; excludes 2021 Limited/Nightshade/TRD Pro and all 2022–2024 factory LED-high lamps. DRL operates at full brightness.
Check installed equipment
Diode Dynamics 194 Red / Amber Marker Bulbs (Pair)
Match the original bulb, lamp position, colour and package quantity. The supported applications are listed below.
Fitment and quantities
- Factory puddle-light application is listed only through 2016. Match the existing 194 socket; do not extend to 2017–2024.
- 194 map-light pair. White, Warm White and decorative interior colours remain separate product choices.
- 194 vanity-light pair. This is not the Tacoma 28 mm four-bulb vanity package.
- 194 door-light pair or the exact SMD12 board option. A board sold singly needs two for the source pair; confirm its supplied adapters and clearance.
- 194 side-marker replacement. Match the lamp’s required colour/function; decorative interior colours are not added to this application.
Check installed equipment
Diode Dynamics 7440/7443 Amber or Red LED Bulbs (Pair)
Match the original bulb, lamp position, colour and package quantity. The supported applications are listed below.
Fitment and quantities
- Match the front 7443 socket and required signal colour/function. Exact current source choices only; a colour option is not a street-use approval.
- Rear replaceable 7443 signal bulb application. Match colour to the lens and intended signal function; use the source-listed choice only.
Check installed equipment
Diode Dynamics 29 mm HP6 LED Festoon Bulb (Single)
29 mm dome festoon, one bulb. Do not use Tacoma 31 mm year rules or substitute a four-pack vanity kit.
Check installed equipment
Diode Dynamics SMD12 Interior LED Board with Socket Adapters (Single)
Match the original bulb, lamp position, colour and package quantity. The supported applications are listed below.
Fitment and quantities
- Trunk lamps use the exact source-listed 31 mm festoon or SMD12 board option. Where BTS sells singles, select quantity two for the source pair. Board and festoon are different physical formats.
- 194 door-light pair or the exact SMD12 board option. A board sold singly needs two for the source pair; confirm its supplied adapters and clearance.
Check installed equipment
Diode Dynamics 194 Blue or Green Interior LED Bulbs (Pair)
Match the original bulb, lamp position, colour and package quantity. The supported applications are listed below.
Fitment and quantities
- 194 map-light pair. White, Warm White and decorative interior colours remain separate product choices.
- 194 vanity-light pair. This is not the Tacoma 28 mm four-bulb vanity package.
- 194 door-light pair or the exact SMD12 board option. A board sold singly needs two for the source pair; confirm its supplied adapters and clearance.
Check installed equipment
Diode Dynamics 31 mm SMF2 or HP6 LED Festoon Bulb (Single)
Trunk lamps use the exact source-listed 31 mm festoon or SMD12 board option. Where BTS sells singles, select quantity two for the source pair. Board and festoon are different physical formats.
Check the listed year and trim
Diode Dynamics Interior LED Conversion Kit for 2010–2024 Toyota 4Runner
4Runner DD0499/DD0500 fifteen-bulb interior kits, including two trim tools. Do not substitute the Tacoma interior kits.
Headlight accessories and retrofit parts
Match the exact headlight part number. Legacy XB adapters, SC8 drivers, fitted film and retrofit halos are not interchangeable upgrades.
Check installed equipment
Morimoto XB 4Runner Adapters: For OE LED Low + Halogen High Equipped 4Runners
LF531H-2 for earlier Morimoto XB assemblies on 2021 LED-low/halogen-high equipment; not an extra adapter required by Evo.
Check installed equipment
XB Adapters: Toyota 4Runner XB 2021-2024 OE LED (Pair/OEM LED Low/LED High)
LF531H for earlier Morimoto XB assemblies on LED-low/LED-high equipment; not an extra adapter required by Evo.
Check installed equipment
Morimoto Supercharged Drivers: LF2-531 Series (Set)
LF2-DRVSC8 only for LF2-531/LF2-531Y. Off-road output; original drivers must be reinstalled for standard intensity.
Check installed equipment
Diode Dynamics 90mm HD LED Halo Rings for 2014–2021 Toyota 4Runner (Pair)
90 mm halo retrofit requires opening and resealing compatible headlights. White, Red and Switchback source choices; obsolete Amber DD2026 excluded. No 2022–2024 or Tacoma 80 mm admission.
Check installed equipment
Lamin-X Clear Headlight Film for 2014–2024 4Runner Morimoto XB Evo / Hybrid
Exact LF2-531/LF2-531Y lens shapes only; not original Toyota headlights.
Installation and setup guides
Use the guide for the exact product. Universal assembly and programming guides do not replace the vehicle-specific removal and wiring instructions.
- 2014–2024 Toyota 4Runner XB Evo & Evo Hybrid Installation Guide
- 2014–2024 Toyota 4Runner FORM Headlight Installation Guide
- FORM tail-light installation: 2010–2024 Toyota 4Runner
- Morimoto tail-light installation: 2010–2024 Toyota 4Runner
- Morimoto X3B70 installation: 2010–2024 Toyota 4Runner
- 2014–2024 Toyota 4Runner XBG Grille Installation Guide
- 2010–2024 Toyota 4Runner ditch-light installation guide
- 2014–2019 Toyota 4Runner SS30 stealth lightbar installation guide
- Toyota 4Runner SS6 grille-light installation guide
- 2014–2024 Toyota 4Runner SS5 stealth grille installation guide
- 2010–2024 Toyota 4Runner reverse-light installation guide
- 2014–2024 Toyota 4Runner Tail as Turn installation guide
- Diode Dynamics × Kuat DEK integrated-lighting installation
- Toyota 4Runner Interior LED Bulb Installation Guide
- Toyota 4Runner 90mm HD Halo Retrofit Installation Guide
- 4Runner Banger Ditch-Light Preparation & Pod Assembly
- 4Runner XB Evo Clear Film Application Guide
- 2014–2024 Toyota 4Runner SS3 Fog Light Installation Guide
- Toyota 4Runner FORM License Plate Light Installation Guide
- FORM Toyota 4Runner and RAV4 Mirror Light Installation Guide
- Morimoto Heated Toyota 4Runner Headlights: Fitment Guide
- Diode Dynamics Type B Dual Color Fog Light Programming Guide
- Morimoto Type T Evo Fog-Light Installation and Aiming Guide
- Morimoto XB Type T Fog-Light Connection and Installation Guide
- Diode Dynamics HitchMount C1/C1R Installation Guide
- SS10 Chase Light Installation & Programming Guide
- Stage Series Rock Light Installation & Wiring Guide
- SS5 CrossLink Light Bar Assembly & Wiring Guide
- Prinsu/Sherpa SS5 CrossLink Installation Guide
- H11 SL2 and SL2 Pro LED Bulb Installation Guide
- Morimoto White Rock Light Installation Guide
- Morimoto RGB Rock Light Installation and Control Guide
- Morimoto Backup Light Boost Bar Wiring Guide
Choose in the right order
Start with visibility and the lamps you use most often, then add trail or work lighting for a defined job. Keep auxiliary off-road patterns separate from road fog-light use. The 4Runner buying guide explains those choices, wiring planning and common fitment traps.