BTS LIGHTING · MORIMOTO TYPE T
A wide fog beam. Dedicated white output.
Morimoto XB Evo Type T fog lights combine a 102° beam, integrated aiming adjusters and factory-style connections for a controlled spread close to the road.
White light with a wide reach


LF092 is the white-only Evo pair. Its Osram LEDs and Ishida SAE Wide Fog optics spread light 51° to either side, with a controlled vertical beam. For selectable white and yellow output, choose the separate Evo+ pair.

Manufacturer comparison photographs illustrate the beam. The published model specifications are listed below.
Match the factory fog-light equipment
For compatible original Type T fog-light locations, including Toyota Tacoma 2012–2023. Match the factory mounting arrangement and H11/H9/H8 connection; a truck without factory fog lights needs additional equipment beyond this replacement pair.
Morimoto’s current Tacoma listing gives Toyota replacement references 81240-06071 and 81210-08020. Confirm the original equipment when checking another Toyota application.
Optics, construction and what is included
- Output
- White
- Published raw output, per light
- 1,500lm white
- Published intensity
- 8,500cd
- Power
- 20.5W per light
- Beam spread
- 102° horizontal; 6.3° vertical
- Connector
- H11/H9/H8 male
- Housing / lens
- Die-cast aluminium / UV-resistant hard-coated polycarbonate
- Warranty
- Morimoto ten-year limited warranty
Morimoto lists this model as compliant with SAE J583 F3 and ECE R19. Correct installation and aiming remain essential.

The set includes two fog-light assemblies, eight Phillips-head mounting screws and two connector housings. Protective film is optional. These are fog lights; they do not add a decorative backlight.
Fit, connect and aim the pair
The lamps use the original fog-light locations and include aiming adjusters. Some applications need minor trimming at the inner/forward bracket legs. Check connector polarity before locking the supplied housings in place, then aim the beams using the model’s four-inch drop at 25 feet.
BTS illustrated Evo fog-light guide
See every relevant manual illustration: mounting, optional film, polarity, aiming and the differences between Evo and Evo+.
Product questions
Does this include both fog lights?
Yes. LF092 supplies a pair, mounting screws and two connector housings.
Can this model change colour?
No. LF092 is white-only. Choose LF093 Evo+ if you want switchable white and yellow output.
Is installation always modification-free?
No. The Type T manual calls for minor bracket-leg trimming on some applications. The illustrated guide shows the exact area and the connector-polarity check.
Does this fit a Tacoma without factory fog lights?
This is a replacement lamp pair. It does not include a complete fog-light conversion harness, switch and bumper trim for a fogless truck.
Plan your 4Runner lighting
Compare this part with other supported applications and confirm original equipment before ordering.
Shop 2014–2024 4Runner lighting · Read the 4Runner buying guide



























