FORM LIGHTING · FL0001
A sharper signature for your Tacoma.
Bring a modern black-bezel design to the third-generation Tacoma, with three bi-LED projectors and a white or amber daytime signature you choose at the lamp.
- Left + rightComplete headlight pair
- White / amber DRLIntegrated daytime signature
- 2-year warrantyLimited manufacturer coverage

A COMPLETE LIGHTING UPGRADE
Output, style and everyday function
Integrated LED optics
All three projectors are bi-LED units, providing low- and high-beam output. The integrated cutoff and screw-type adjusters help you set the beam on the actual truck.
Daytime signature
Choose white or amber DRLs at the connector on the back of each lamp: connected for white, disconnected for amber. The running lights use a two-stage startup sequence.
Amber turn signals
Amber LEDs sweep across the running-light signature when you signal, then return to the selected DRL colour.

THE DAYTIME SIGNATURE
A closer look at the lighting functions
Choose white or amber DRLs at the connector on the back of each lamp: connected for white, disconnected for amber. The running lights use a two-stage startup sequence.

MATCH THE TRUCK AND ORIGINAL LIGHTS
Exact fitment before you order
| Check | This application |
|---|---|
| Vehicle | 2016–2023 Toyota Tacoma |
| Market | USDM models only |
| Factory headlights | Halogen or LED, with the correct matching adapter |
| Version | Current FL0001, black projector bezels and selectable DRL; FL0112 Standard is a separate product |
| Exact part | FL0001 |
| Package | Complete left and right headlight assemblies |
THE STANDARD PACKAGE
What comes with the pair

- Left and right headlight assemblies
- DRL harness
- Two halogen-headlight adapters
The current installation guide also describes an OEM-LED adapter. Confirm that required adapter with BTS for factory-LED trucks; do not assume it is included with the halogen adapters.
Other lighting, bodywork and accessories in vehicle photographs are separate products.
PLAN ACCESS, WIRING AND AIM
Installation details worth knowing
Access requires removal of the grille and bumper, then transfer of the original trim piece to each new headlight. Use the harness arrangement for the truck’s original lights. The optional add-a-fuse setup provides independent DRL power on halogen trucks; the guide notes the stalk must be in OFF for true DRL operation. Reconnect vehicle sensors, test all functions and aim the lamps before use.
Read the official FL0001 installation guide
Use the instructions supplied with your exact set. Secure wiring away from heat and moving parts, reconnect all original sensors and test every lighting function before final reassembly.

EXACT PART · FL0001
Technical specifications
| Detail | Manufacturer specification |
|---|---|
| Optics | Three bi-LED projectors per headlight |
| DRL | Selectable white / amber |
| Turn signal | Sequential amber |
| Operating voltage | 9–16 V |
| Ingress rating | IP67 |
| Operating temperature | −40°C to 85°C |
| Housing finish | Black with black projector bezels |
| Warranty | Two-year limited manufacturer warranty |
FORM states that these headlights meet applicable SAE, DOT, FMVSS and CMVSS requirements for road use in the United States and Canada when correctly installed and aimed. Set the low-beam cutoff on the actual vehicle.
FORM Lighting provides a 2-year limited manufacturer warranty. Coverage, exclusions and return authorization follow the manufacturer’s current policy. Keep your proof of purchase and contact BTS before removing a lamp for a suspected warranty issue.
SEE THE DESIGN
Watch the official product videos
See the exact design and the installation process in FORM’s own videos. Match the written adapter and fitment notes above to your original lights.
Official FORM product overview

Official FORM installation guide

Choose a video to load it. No autoplay. Watch the overview or installation guide when you are ready; the videos load only after you choose them.
CLEAR ANSWERS BEFORE CHECKOUT
Your Tacoma projector questions
Is this one lamp or a pair?
One order supplies complete left and right headlight assemblies with the listed standard installation parts.
Which vehicle does this set fit?
2016–2023 Toyota Tacoma, USDM models. Match your original lighting to the fitment and adapter notes above.
How do I choose the daytime lighting?
Choose white or amber DRLs at the connector on the back of each lamp: connected for white, disconnected for amber. The running lights use a two-stage startup sequence.
Does this require replacing separate bulbs?
These are complete integrated LED assemblies, rather than replacement bulbs for the original housings.
Should the lights be aimed after installation?
Yes. Test all functions, then aim the low-beam cutoff on the actual vehicle. Load and suspension height can change the aim.
What warranty applies?
FORM Lighting provides a two-year limited manufacturer warranty. Coverage and exclusions follow its current terms. Retain proof of purchase and contact BTS for assistance.
Does this apply to my older fixed-colour FL0001?
The current version has selectable DRLs. Earlier fixed-white or fixed-amber sets cannot gain that feature simply by following the new connector instructions. Match any replacement or warranty part to the version you own.
THE FINISHED LOOK
See the design on the truck
Original manufacturer photography; other vehicle equipment is separate.

Install your FORM headlights
Follow the illustrated bumper-removal, adapter, DRL-colour and fuse-tap instructions.




















