Form Lighting LED Projector Headlights for 2016–2023 Toyota Tacoma — Selectable DRL (Pair)
Black-bezel FORM headlight pair. Match original halogen/LED wiring; manufacturer publishes a USDM application condition.
THIRD-GENERATION TACOMA · 2016–2023
Build a lighting setup around your truck, your routes and your original equipment. Compare complete assemblies, fitted off-road kits and the smaller replacements that finish the job.

Start with 2016–2023 Tacoma, then check exceptions such as TRD Pro fogs and Trail Edition mounting.
Factory halogen, factory LED and an earlier aftermarket conversion can require different wiring.
Access Cab and Double Cab third brakes differ. Rack, receiver and bed-light equipment matter too.
A bracket, adapter or harness can be useful on its own, but it does not include the lamp or full kit.
For Canadian-market or modified trucks, compare the actual lamps and connectors with the product instructions. Send BTS photographs when the original setup is uncertain.
Start with the lamps already on the truck. Choose the assembly and wiring for that original equipment; a similar-looking connector or model-year label is not enough.
Black-bezel FORM headlight pair. Match original halogen/LED wiring; manufacturer publishes a USDM application condition.
Heated-lens XB Evo headlight pair. Confirm the correct wiring for the truck's original headlights.
XB Evo Hybrid headlight pair. Non-heated lens; confirm original headlight equipment and wiring.
Chrome FORM headlight pair. Match original halogen/LED wiring; manufacturer publishes a USDM application condition.
Choose a complete lamp, a vehicle kit or a mounting kit deliberately. White or Yellow describes the main output; a backlight or programmable accent is a separate feature. Read each family's trim and original-fog requirements.
Type B complete fog lamps. Tacoma application requires original fog lamps and excludes TRD Pro; choose the exact output/configuration.
Type B mounting kit, not a complete lamp kit. Match the intended SS3 lamps and exact mounting application.
Toyota SS3 fixed-colour fog kit. Original fog lamps required; TRD Pro excluded. Sport, Pro and Max are distinct options.
Toyota XB Evo fog assembly. Check the Type T mounting/application details for the original fog location.
Older Type T XB fog set, White output. Keep its hardware and instructions separate from Evo/Evo+.
Older Type T XB fog set, Amber output. Keep its hardware and instructions separate from Evo/Evo+.
Type T XB Evo+ fog set with White/Yellow output. Check its mounting and switching instructions.
Type B SS3 Dual Color fog kit. Original fog lamps required; TRD Pro excluded. Follow its own programming instructions.
Complete Type T fog kit. Choose the exact output and optic; the Wide fog claim does not apply to every beam choice.
Add off-road side coverage with the correct Tacoma brackets and matched pods. Complete kits and bracket-only products are listed separately; do not assume the wiring or lamps are included in a bracket price.
Tacoma ditch brackets only. Lamps/wiring are separate; manufacturer excludes automatic car washes with this kit installed.
Complete SS3 Tacoma ditch kit. Choose the actual pod tier/colour; avoid automatic car washes with the kit installed.
Current C2 2.0 Tacoma ditch kit. Preserve this generation distinction; avoid automatic car washes with the kit installed.
Complete Tacoma 2Banger ditch kit with the listed brackets, pod pair and harness. Choose the actual beam and power option.
Complete Tacoma 4Banger ditch kit. Match the listed pod generation, beam and output; covers are not implied by a kit photograph.
A concealed bar keeps the main hardware behind the grille. Match the current bar or the separate Classic system to its own bracket kit and instructions.
Separate Classic Stealth system. Match its bar and options; do not treat it as the current SS30 kit.
Current Tacoma SS30 Stealth kit. Select the exact bar tier/beam and follow the grille installation guide.
Tacoma SS30 brackets only. The light bar and wiring are not implied by the bracket listing.
A rack light needs the right rack, cutout and supporting hardware. Vehicle-specific rack packages, rack lighting kits and bare CrossLink bars have different contents.
Bare five-pod Sport CrossLink bar. Rack, vehicle brackets and power/control hardware depend on the chosen installation.
Bare five-pod Pro CrossLink bar. Rack, vehicle brackets and power/control hardware depend on the chosen installation.
Bare six-pod Sport CrossLink bar. Confirm overall width and required mount/support hardware.
Bare six-pod Pro CrossLink bar. Confirm overall width and required mount/support hardware.
Prinsu 40-inch cutout or compatible Sherpa half-height wind-deflector setup required. Select exact bar/pod-count options.
Tacoma Kuat DEK rack-and-lighting family. Compare the exact rack/lighting package and cab/roof installation requirements.
Rack mounting/support brackets only, for the specified Prinsu/Sherpa wind deflectors. Light bar is separate.
Choose complete rear assemblies by model year and cab. Access Cab and Double Cab third-brake applications are distinct; appearance alone does not establish the correct part.
FORM complete tail-light pair for 2016–2023 Tacoma; retain the exact colour/package choice.
Morimoto clear-lens tail-light pair for 2016–2023 Tacoma. Select the correct complete pair.
Optional F1-style flash module for its stated compatible lamp system. Confirm compatibility and permitted use before choosing it.
Morimoto red-lens tail-light pair for 2016–2023 Tacoma. Select the correct complete pair.
For 2016–2023 Access Cab, current Morimoto instructions direct customers to X3B05. This listing also serves earlier Tacomas.
X3B10 for 2016–2023 Double Cab. Do not substitute it for the Access Cab lamp.
Compare a vehicle reverse kit, a harness-only item and a receiver-mounted lamp. Confirm the connector, mounting clearance and control method for the exact product.
HitchMount family for the specified receiver/connector setup. Requires rear receiver clearance; it does not replace factory tail lamps.
Universal backup bar. Confirm its mounting space, electrical connection and included hardware for your installation.
Universal SS10 chase light. Requires a suitable rear mounting and control/wiring plan.
Tacoma reverse-light harness only. Pods and mounting parts are separate; follow the current source-supported application.
Complete Tacoma C1 reverse kit. Compare the control and rear mounting steps before installation.
Complete Tacoma C2 2.0 reverse kit. Match this generation and the selected output tier.
Some replacements need the original lamp assemblies or factory bed-light equipment. A bed-rail utility light is a different installation from a factory bed-lamp replacement.
Morimoto mirror-lamp pair for factory mirror-light-equipped 2016–2023 Tacoma; check the original lamp setup.
Blade utility bed light with Toyota bed-rail adapter. This is not a factory bed-lamp replacement pair.
FORM mirror-light pair. Requires factory mirror lamps on a 2016–2023 Tacoma.
FORM factory bed-light replacement pair. Requires original bed lights on a 2020–2023 Tacoma.
FORM plate-light pair for 2016–2023 Tacoma. Confirm the original plate-lamp assembly.
Morimoto plate-light pair for 2016–2023 Tacoma with stock plate assemblies.
Morimoto bed-light pair for 2020–2023 Tacoma with stock bed lights; check the OE assembly application.
Keep the correct socket, colour, length and pack quantity. These generic products can serve multiple vehicles; the Tacoma application does not make every option suitable for every lamp position.
Use the Tacoma bulb-size guide to identify the lamp position, then check the exact product option and package quantity.
H11-family SL2 pair for the supported halogen-bulb application. It does not replace a sealed OEM LED or OEM HID assembly.
H11-family SL2 Pro pair for the supported halogen-bulb application. It does not replace OEM LED/HID assemblies.
H11 HP48 pair. The Tacoma fog-bulb source excludes 2021+ TRD Off-Road; verify the original socket.
H11 XP80 pair. The Tacoma fog-bulb source excludes 2021+ TRD Off-Road; verify the original socket.
7443 HP24 Switchback. Source excludes applications where the turn-signal bulb also acts as the daytime running light.
921 HP36 pair for a confirmed 921 lamp location. Check the bulb and lens function before installation.
921 XPR pair for a confirmed 921 lamp location. Check the bulb and lens function before installation.
Generic replacement bulb family. Match the original socket, lamp position, colour and package quantity; confirm the exact Tacoma application before ordering.
Generic replacement bulb family. Match the original socket, lamp position, colour and package quantity; confirm the exact Tacoma application before ordering.
Generic replacement bulb family. Match the original socket, lamp position, colour and package quantity; confirm the exact Tacoma application before ordering.
Generic replacement bulb family. Match the original socket, lamp position, colour and package quantity; confirm the exact Tacoma application before ordering.
Generic replacement bulb family. Match the original socket, lamp position, colour and package quantity; confirm the exact Tacoma application before ordering.
Generic replacement bulb family. Match the original socket, lamp position, colour and package quantity; confirm the exact Tacoma application before ordering.
Generic replacement bulb family. Match the original socket, lamp position, colour and package quantity; confirm the exact Tacoma application before ordering.
Generic replacement bulb family. Match the original socket, lamp position, colour and package quantity; confirm the exact Tacoma application before ordering.
Generic replacement bulb family. Match the original socket, lamp position, colour and package quantity; confirm the exact Tacoma application before ordering.
Generic replacement bulb family. Match the original socket, lamp position, colour and package quantity; confirm the exact Tacoma application before ordering.
194 Red/Amber pairs. Choose colour for the actual lamp/lens function; these are not white interior or plate-light replacements.
2016–2023 Toyota Tacoma with the listed original incandescent bulb locations. Check the dome socket before ordering: the kit contains a 29 mm dome bulb, while some Tacomas use 31 mm. This package does not include an automatic 31 mm substitution.
Match the original socket, lens colour and lighting function. On the 2016–2023 Tacoma, Amber is listed for front turn signals and Red for rear turn signals. Red HP48 and HP11 are listed for 2020–2023 tail/brake lamps; Red XP80 is listed for 2016–2019 tail/brake lamps, not the later tail application. Factory LED assemblies without a replaceable bulb are outside this fitment.
For a matching 29 mm festoon holder with adequate clearance. Diode lists the 2017–2023 Tacoma dome location, but explicitly asks owners to check the original bulb size because some trucks use a different length. Do not substitute this for a measured 31 mm bulb.
This is an LED board, not a same-shape replacement festoon. The current component page identifies adapters for 74, 194, BA9S and festoon applications including 29/31/36/39 mm. Both Tacoma dome listings offer the panel, but housing clearance and adapter fit still need checking. Compare the manufacturer dimensional drawing below before ordering.
For compatible 194 interior sockets with adequate bulb clearance. Diode lists the 2005–2023 Tacoma map-light application and explicitly excludes HP5 from Prerunner trim. Retain that exclusion even if another output level fits. Blue and Green are interior accents, not plate- or road-marker recommendations.
Measure the original bulb and confirm holder and lens clearance. Diode lists the 2016 Tacoma dome application with an explicit warning that some trucks use a different size, and links to a 29 mm alternative. Model year alone is not a reliable substitute for checking the original bulb.
For matching 28 mm fuse-style vanity-light sockets. Diode lists the Tacoma vanity-mirror application for 2005–2023. Confirm that your vehicle has the original illuminated vanity assemblies and the matching bulb size; this does not add lights to an unlit visor.
Generic 80 mm retrofit rings. The current Tacoma-specific source covers 2016–2019 only and warns that bezel modification may be necessary. Opening, mounting, wiring and resealing are required. Do not extend that application to 2020–2023 or assume an aftermarket headlight has the same internal space.
Plan power, control and routing with the exact light instructions. A mounting kit or accessory harness does not include a complete switching system unless its package says so.
Generic D-Switch stand-off hub mount. It is mounting hardware, not the complete controller or a guaranteed Tacoma-specific fit.
Tacoma fog backlight harness. Factory LED headlights are excluded and some halogen connectors differ; compare the actual connector first.
Tacoma D-Switch hub mount only. Trail Edition excluded; manual-transmission installation requires clutch-reservoir relocation.
Tacoma D-Switch kit. Trail Edition excluded; manual-transmission installation requires clutch-reservoir relocation.
Adapters, replacement drivers and protective film are tied to particular assemblies or original equipment. Check the associated headlight before adding one.
OEM LED headlight conversion harness. Confirm the exact intended original-equipment conversion; not a universal Evo adapter.
Adapters for the stated 2020–2023 OEM-LED/XB application. Match the headlight generation and original wiring.
LF2-DRVSC9 drivers for the specified Tacoma XB Evo assemblies. Optional performance hardware with source-specific use restrictions.
Lamin-X film set for the specified Tacoma Evo/Hybrid headlights. Protective film only; lamps are separate.
These are universal or equipment-dependent additions for a planned installation. Choose the required light count, controller and mounting method; the vehicle still needs a suitable mounting and wiring plan.
Universal lighting family. Check light count, controller, mounts and wiring in the selected package; Tacoma-specific brackets are not implied.
Universal lighting family. Check light count, controller, mounts and wiring in the selected package; Tacoma-specific brackets are not implied.
Universal lighting family. Check light count, controller, mounts and wiring in the selected package; Tacoma-specific brackets are not implied.
Universal lighting family. Check light count, controller, mounts and wiring in the selected package; Tacoma-specific brackets are not implied.
Universal lighting family. Check light count, controller, mounts and wiring in the selected package; Tacoma-specific brackets are not implied.
Universal lighting family. Check light count, controller, mounts and wiring in the selected package; Tacoma-specific brackets are not implied.
Universal lighting family. Check light count, controller, mounts and wiring in the selected package; Tacoma-specific brackets are not implied.
Universal lighting family. Check light count, controller, mounts and wiring in the selected package; Tacoma-specific brackets are not implied.
Universal lighting family. Check light count, controller, mounts and wiring in the selected package; Tacoma-specific brackets are not implied.
Universal lighting family. Check light count, controller, mounts and wiring in the selected package; Tacoma-specific brackets are not implied.
Universal lighting family. Check light count, controller, mounts and wiring in the selected package; Tacoma-specific brackets are not implied.
Universal lighting family. Check light count, controller, mounts and wiring in the selected package; Tacoma-specific brackets are not implied.
Open the guide for the exact system you choose. Each guide keeps the relevant mounting, wiring, aiming and programming instructions with its original technical illustrations.
Choose the road-lighting foundation first, then add the coverage, controls and smaller replacements you need. The Tacoma lighting buying guide walks through those decisions without treating every truck as the same configuration.