BTS LIGHTING · MORIMOTO · LF2-DRVSC9
More output for the off-road Evo setup.
A matched Supercharged driver pair for Morimoto Tacoma LF2-530 XB Evo and LF2-530Y Evo Hybrid headlights. For off-road use only.
A driver upgrade for the exact Evo pair
These replacement LED drivers increase the output of the matching Tacoma XB Evo or Evo Hybrid headlights. Morimoto specifies a 30–50% output increase. The housings and optics remain the headlights you already own.
- Exact compatibility
- Morimoto LF2-530 and LF2-530Y only
- Package
- Two drivers, mounting screws and dielectric grease
- Driver rating
- 1,500 mA
- Status indicators
- Red: ignition/fuse-tap supply; green: low beam; blue: high beam
- Warranty
- Five-year limited manufacturer warranty
Off-road use only
Installing these drivers results in non-compliant headlight intensity. They are not for on-road use in Canada or the United States. The standard drivers supplied with the headlight pair are the road-use configuration.
Check the exact LF2-530 or LF2-530Y headlight label. These are not universal Morimoto drivers and are not listed for the earlier LF530 family.
Use the illustrated driver-change procedure
Tacoma Evo installation guide
The original diagrams cover driver removal, seal preparation, connector seating and the screw-tightening pattern.
Morimoto Tacoma XB Evo headlight installation; driver and wiring steps
Before you order
Does this package include headlights?
No. It includes the two Supercharged drivers and installation hardware only.
Can I use these on the road if I aim the lamps lower?
No. Morimoto specifies non-compliant intensity after installation; a lower aim does not change that stated use restriction.
What do the three indicator colours mean?
Red indicates the ignition/fuse-tap supply, green indicates low-beam power and blue indicates high-beam power. Check the matching function and supply if an indicator does not light.
