BTS LIGHTING · 2016–2023 TACOMA
A sharper rear view. Your choice of signal pattern.
Morimoto XB red-lens tail lights combine red brake and parking light blades, amber turn signals and built-in LED reverse lighting in a direct-fit pair.
A complete LED tail-light pair
Amber turns, two patterns
Choose sequential or conventional on/off operation with the connectors on the back of each lamp.
Built-in reverse lights
The pair includes LED reverse lights. The separately sold Boost Bar adds light through the lamp’s accessory connection.

Made for the 2016–2023 Tacoma
LF703.2 is the red-lens left/right pair for the third-generation Tacoma. It uses the original mounting points and Toyota multi-pin connections; this application does not extend to the redesigned 2024 truck.
Morimoto’s published testing covers US-spec vehicles. Match the original rear-lighting equipment and connections on Canadian or other-market trucks; ask BTS if you need help checking your truck.
- Lens / housing
- UV-resistant polycarbonate / ABS plastic
- Brake / parking
- Bright red / dim red
- Turn signal
- Amber; sequential or standard on/off
- Reverse
- Integrated LED lighting
- In the box
- Two complete tail-light assemblies
- Warranty
- Morimoto five-year limited warranty; manufacturer terms apply
An illustrated guide for the complete installation
Remove the two mounting bolts, release the original lamp, connect the replacement and choose the signal mode. Other aftermarket signals or LED-bulb conversions can affect flashing behaviour, so test all functions on your truck.
Install and configure your XB tail lights
The BTS guide includes every manual illustration, both signal settings and the optional Boost Bar’s drilling and wire-routing procedure.
Product questions
Does this price cover both sides?
Yes. LF703.2 supplies the left and right tail lights.
Can I use normal flashing instead of a sequential signal?
Yes. Both modes illuminate amber. Use the rear connectors to set both lamps consistently.
Is the Boost Bar included?
No. The tail lights already include reverse lighting. The Boost Bar is an optional, separate accessory.
Does the Boost Bar install the same way as the lamps?
No. Its separate mounting procedure includes a cable hole through the bumper and a connection at the right tail light. Read the illustrated guide before fitting it.

























