BTS LIGHTING · MORIMOTO · XRL05
4-pod White rock lighting, ready to plan your way.
4 Morimoto V2 white rock lights for wheel wells, frame rails and other planned mounting locations. A universal wired kit for trucks, SUVs and powersports, with an in-cabin switch.
4 lights. A coordinated underbody setup.

- Light output
- White
- Manufacturer-rated output per pod
- 460 lumens
- Electrical system
- 9–18 volts
- Housing and lens
- Black powder-coated cast aluminium / Makrolon polycarbonate
- Control
- Illuminated push-button switch
- Warranty
- Limited lifetime manufacturer warranty
Light the areas around the truck
Place the pods where they illuminate the ground or the area you need to see. The compact housings can mount using their integrated screw points or the supplied magnetic mounts. Plan cable routing before fixing the lamps in place.

What comes in this kit
- 4 V2 White rock lights
- Main harness with an in-cabin push-button switch
- Mini and Micro fuse adapters
- 1 two-way splitter
- 2 extension cables, approximately 6 feet each
- 4 screw-on magnetic mounts
- Mounting hardware and cable ties
Universal mounting; plan around your vehicle
This is not a Tacoma-specific bracket kit. Check mounting surfaces, clearances and cable lengths for your truck, including suspension travel and steering movement. Choose a protected route away from hot exhaust parts and moving components.
Use rock lighting where permitted for the location and activity. Coloured accent lighting is not a replacement for road-legal headlamps, marker lights or signals.
See the wiring before you start
White rock-light installation
Original wiring diagrams and mounting photographs, with a readable BTS sequence.
Morimoto rock-light system overview
Compare the fixed kit sizes
Before you order
Is this kit specific to the Tacoma?
No. These are universal rock lights. Match the mounting locations, wiring lengths and electrical requirements to your vehicle.
Do the White kits change colour?
No. Choose an RGB kit if you want app-controlled colour changing.
Does magnetic mounting make the entire installation drill-free?
The lamps can use the magnetic mounts, but the manufacturer’s push-button installation calls for an 18 mm / 11⁄16-inch opening. A small fuse-box-cover notch may also be needed for the wiring.
Are extensions and extra lights unlimited?
No. Use the supplied system diagram and the current controller or harness limits when adding compatible parts. Extra accessories are sold separately.
Plan your 4Runner lighting
Compare this part with other supported applications and confirm original equipment before ordering.
Shop 2014–2024 4Runner lighting · Read the 4Runner buying guide
Plan your Wrangler lighting
Compare complete kits, mounting parts and installation guides for your generation. Check each product’s original-equipment and trim requirements.
Compare Jeep Wrangler JK and JL lighting · Read the Wrangler lighting upgrade guide



































