Jeep Wrangler JK & JL lighting upgrades

2007–2017 JK; confirm 7-inch mounting and H13 connection. One LF271 lamp; order two for a pair. Required JK anti-flicker harnesses and optional H4 adapter are separate.

Elite or Elite Max headlight pair. Diode Dynamics excludes Canadian-spec vehicles; right-hand-drive fitment is unverified. Welcome animation requires automatic locks.

Sealed7 headlight pair with anti-flicker modules. Match the original halogen equipment, mounting rings and connections; JL is a different application.

Super7 headlight pair with external LED drivers and anti-flicker modules. Reuse the original mounting rings and hardware; original halogen equipment and left-hand drive.

EXP76402P pair. Older instructions and dealer records include JK, but the current manufacturer fitment table differs. Confirm the exact vehicle with BTS before ordering.

RGBW halo accessory for the compatible LF517 Super7 headlights. Includes two halos, controller, wiring and mounts; the headlights are separate.

United Pacific replacement headlight assembly for the listed H4 halogen application. Choose Driver or Passenger; each option supplies one assembly.

Sealed7 headlight pair with JL mounting adapters and anti-flicker modules. Match the factory multi-pin connector and the current product’s equipment requirements.

Super7 headlight pair with JL mounts, LED drivers and anti-flicker modules. Match the original connection. RGBW halos are optional and separate.

JL combination of Super7 headlights and Red-lens tail lights. Match the original connectors and transfer supported blind-spot hardware. Halos and the Boost Bar are optional extras; excludes JK and JT.

Elite Type M pair for the matching factory plastic bumper and original fog equipment. Choose fixed White, fixed Yellow or SmartSelect where listed; JL Sport plastic uses a different mount.

Type M fixed-output fog pair for the factory plastic bumper and existing fog-light equipment. Factory steel uses the separate Type MR application. Choose power and White or Yellow output on the product page.

JL Type M non-Sport plastic, Type MR steel or Type MS Sport plastic. The exact Type MR steel choices also have a separate JK application. Match existing fog equipment and the factory bumper before choosing colour and power.

Pro Comp 76504P White fog-light pair with separate halo control. Match the original bumper mounting and connectors; review the manual’s use restriction.

Elite Type MR pair for the matching factory steel bumper and original fog equipment. Choose fixed White, fixed Yellow or SmartSelect where listed.

White 5500K LF030 fog pair for the listed 2007–2017 JK application. Confirm any required 5202 adapter; it is not established as included. Optional Yellow film does not create switchable output. Confirm 2018 separately.

Dual Color Type MS fog pair for the source-listed JL Sport plastic bumper. Check the narrower generic year range and current vehicle-specific fitment on the product page. SmartSelect main-beam colour is separate from the backlight.

Dual Color Type M fog pair for the matching factory plastic bumper: JK or JL non-Sport applications. Confirm the exact year and existing fog equipment; SmartSelect programming is explained in the linked guide.

Dual Color Type MR fog pair for the matching factory steel bumper. Confirm the exact JK/JL application and original fog equipment; SmartSelect programming is explained in the linked guide.

2007–2017 JK Wide fog kit; NCS or HXB, White or Yellow. Models from 2007–2009 need two separate BAF060 adapters. Compatibility with 2018 JK is not confirmed.

NCS Wide fog-light kit for JL Sahara/Rubicon with original non-LED fogs. Excludes Sport. Choose White or Yellow main-beam output.

DD6106 White Combo SS50 hood kit for the listed 2018–2025 JL applications. Excludes 392; confirm trim, hood clearance and current supplier availability before ordering.

Four Standard SS3 pods: two Driving and two Flood. Match the listed JL Sport, Sport S or Sahara cowl equipment and trim exclusions. Choose fixed White or Yellow main output.

Complete ditch-light kit with the listed vehicle mounts and relay harness. Choose output, main-beam colour and optic on the product page. A-pillar mounting is for off-road use.

Complete ditch-light kit with the listed vehicle mounts and relay harness. Choose output, main-beam colour and optic on the product page. A-pillar mounting is for off-road use.

Complete ditch-light kit with the listed vehicle mounts and relay harness. Choose output, main-beam colour and optic on the product page. A-pillar mounting is for off-road use.

Complete ditch-light kit with the listed vehicle mounts and relay harness. Choose output, main-beam colour and optic on the product page. A-pillar mounting is for off-road use.

Complete ditch-light kit with the listed vehicle mounts and relay harness. Choose output, main-beam colour and optic on the product page. A-pillar mounting is for off-road use.

Complete ditch-light kit with the listed vehicle mounts and relay harness. Choose output, main-beam colour and optic on the product page. A-pillar mounting is for off-road use.

Four linked SS5 pods, or a bracket-only option. Installation enlarges the existing frame holes to 10 mm for rivnuts. Check the bumper and winch clearances.

Two separate SS5 pods, or brackets only. Choose Driving or Combo optics. Installation uses 10 mm holes and rivnuts; check the bumper and winch clearances.

Eight Sport SS5 pods, or brackets only. Match the factory A-pillar mounts and check accessory clearance before ordering.

Four linked SS5 pods, or brackets only. Installation uses 10 mm holes and M6 rivnuts. Check the winch, fairlead and bumper clearances.

Eight Sport SS5 pods, or brackets only. Match the factory cowl mounting points and use the specified spacers and supports.

2018–2026 Wrangler JL. One Classic SS30 White Driving bar; not the newer Sport or Pro model.

2018–2025 Wrangler JL. Two Classic SS30 White Driving bars; not the newer Sport or Pro models.

Two separate SS5 pods with Driving or Combo choices. Check the illustrated 20.4-inch spacing against the winch and fairlead. Installation uses 10 mm holes and M6 rivnuts.

2018–2026 Wrangler JL Sport, Sport S, Sahara and Rubicon. Choose Sport or Pro, Driving or Combo, and White or Selective Yellow.

Complete bar, vehicle mounts and relay harness. Excludes 4xe, 392, Mojave and 2026 Rubicon/Rubicon X. Installation requires a cable opening in the cowl.

Complete bar, vehicle mounts and relay harness. Excludes 4xe, 392, Mojave and 2026 Rubicon/Rubicon X. Installation requires a cable opening in the cowl.

Complete bar, vehicle mounts and relay harness. Excludes 4xe, 392, Mojave and 2026 Rubicon/Rubicon X. Installation requires a cable opening in the cowl.

Requires a compatible open-back 2-inch or 2.5-inch receiver and matching 7-pin trailer connection. Confirm the vehicle harness; remove the lamp when towing.

FORM pair for 2018–2023 JL. Transfer original blind-spot modules when fitted. Amber sequential signals require the supplied harness connected to the front signal circuits.

LED700 auxiliary reverse bar for a compatible plate mount. Check clearance and use the matching XB Boost connection or the supplied 9–16V reverse-circuit pigtail.

Smoked-lens pair for the listed JL original halogen/LED applications. Transfer factory blind-spot hardware when fitted. The optional Boost Bar is separate.

Red-lens pair for the listed JL original halogen/LED applications. Transfer factory blind-spot hardware when fitted. The optional Boost Bar is separate.

Side-vent lights, distinct from bumper or fender side markers. Follow the two-wire 12V positive/negative connection in the guide.

Choose the actual Standard or High-Line fender profile; base one-piece fenders are excluded. White DRL and amber turn functions are separate from RGB display modes. Two-year coverage applies.

Requires the 205 mm factory DRL arrangement; excludes Sport, Willys Sport and Willys. Confirm the marker wiring. See the product note about retaining original amber markers.

2018–2026 Wrangler JL with the factory hardtop. Excludes soft tops, aftermarket hardtops and Gladiator JT; uses an independent power harness, not factory reverse-light wiring.

One LFZ17 LED licence-plate lamp for the listed JL replacement application. Confirm original part 68310837AA and the connector; this is plate illumination, not an auxiliary reverse light.

Four RGB pods with XBT V2 control. Plan mounting, cable routing and the 9–18V electrical connection; not a Wrangler-specific bracket kit.

Four fixed-White pods. Plan mounting, cable routing and the 9–18V electrical connection; not a Wrangler-specific bracket kit.

Eight fixed-White pods. Plan mounting and cable lengths; the manufacturer lists four magnetic mounts, with screw mounting available for the remaining locations.

Six fixed-White pods. Plan mounting and cable lengths; the manufacturer lists four magnetic mounts, with screw mounting available for the remaining locations.

Six RGB pods with XBT V2 control. Plan mounting, cable routing and the 9–18V electrical connection; not a Wrangler-specific bracket kit.

2007–2017 Wrangler JK. Complete vehicle-specific D-Switch system.

2018–2026 Wrangler JL, excluding 392 V8 and 3.0L diesel. Complete vehicle-specific D-Switch system.

LF630 adapter housings, wiring and hardware for compatible separate 7-inch lamps; original non-LED headlights only. The lamp pair is not included.

DD6255P mounting kit for compatible SS3 fog-light installations. Lamps are separate. Confirm the exact factory mount and vehicle application before ordering.

DD6089 brackets for the listed JL Sport, Sport S and Sahara cowl applications. Excludes the specified 4xe and 392 XR configurations; confirm other trims. Lamps and wiring are separate.

2018–2025 Wrangler JL; the available option is DD6027 brackets only. Light bars and wiring are separate.

DD7283P bumper brackets and hardware only; lamps and power harness are separate. Installation uses 10 mm holes and M6 rivnuts.

2007–2017 Wrangler JK. D-Switch mounting kit only; the Hub and controller are separate.

2018–2026 Wrangler JL, excluding 392 V8 and 3.0L diesel. Mounting bracket and hardware only; D-Switch electronics are separate.

2018–2026 Wrangler JL and 2020–2026 Gladiator JT with the supported factory bumper. Brackets only; lamps and wiring are separate.

Vehicle-specific ditch-light brackets and hardware. Compatible pods and wiring are separate; these mounts are already included with the matching complete kits.

Vehicle-specific ditch-light brackets and hardware. Compatible pods and wiring are separate; these mounts are already included with the matching complete kits.

BAF081 windscreen mounts for a compatible JL light bar. Bar and wiring are separate. Check the listed trim exclusions before ordering.

One DT-to-9006 adapter. Two are required for the supported 2007–2009 JK Type M fog-light installation. Check the actual connectors; lamps and fog-light kit are separate.