PRO COMP 76504P · WRANGLER JK
A white LED fog-light pair for the factory JK locations
A complete pair with separate halo-control wiring, 6000K white flood output and built-in anti-flicker circuitry. Match the factory bumper mounts and connectors before ordering.
The lights you receive
One order contains two Pro Comp 76504P fog lights. BTS identifies the pair as EXP76504P. The main LEDs produce white flood lighting; the surrounding halo uses its own control connection.
Match the JK body style and bumper
Pro Comp lists 2007–2018 Wrangler JK, in two-door and four-door form. For 2018, confirm JK rather than the newer JL. This listing does not establish Cherokee, Grand Cherokee or JL fitment.
The lamps replace the original fog-light locations. Compare the mounting ears and electrical connection on your Jeep; an aftermarket bumper may require a different mounting solution.
Two lighting connections, one clear wiring reference
The original manual separates the main fog-light plug and 9005-to-5202 converter from the halo control harness. Its labelled diagram shows the parts and the separate blue and white control leads. Use the original diagram to match the supplied harness; it does not provide vehicle-specific wire colours or bumper-removal steps.
The manual is marked “For off-road use only,” while the current product advertisement makes road-approval claims. This page does not promise on-road approval for your location.
Construction and specifications
- Manufacturer part
- 76504P
- BTS SKU
- EXP76504P
- Package
- Two lights, control wire and two connecting wires per manual
- Main output
- 6000K white; flood beam
- Housing
- Polycarbonate housing; sealed electronics
- Ingress rating
- IP67
- Coverage
- Manufacturer limited lifetime warranty, subject to terms
Installation and warranty help
Disconnect the battery ground before electrical work. Keep harnesses clear of heat, sharp edges and moving parts. Confirm every supplied connector and use the original manual for the separate halo wiring before applying power. Test the finished installation and adjust the beams.
Pro Comp’s limited lifetime warranty covers defects in materials and workmanship, subject to its conditions and exclusions. Removal, installation and freight costs are excluded.
The manufacturer publishes conflicting raw-lumen figures for this part, so no output number is promised here. See the current Pro Comp product information and the complete original manual in the BTS guide.
Plan your Wrangler lighting
Compare complete kits, mounting parts and installation guides for your generation. Check each product’s original-equipment and trim requirements.
Compare Jeep Wrangler JK and JL lighting · Read the Wrangler lighting upgrade guide


















