BTS Jeep lighting
A low-profile SS50 across the JL hood
The DD6106 kit combines a 50-inch White Combo bar, vehicle-specific hood brackets and a fused harness. Its Combo optics combine forward reach with wider side coverage.
Check the hood before ordering
For the supported Jeep Wrangler JL hood layout shown in the original installation guide. Sport, Sport S, Sahara and standard Rubicon are listed in the vehicle application; the 392 is excluded. The source also excludes Mojave. Identify JL rather than JK on a 2018 Wrangler, and check aftermarket hood, cowl and accessory clearance.

One White Combo light bar
DD6106 includes one 6000K White SS50 Combo bar, DD6090 hood brackets, four spacers and four extended bolts, a fused single-output harness and auxiliary-switch connection. The bar uses Driving optics in the centre and Flood optics toward the outer ends. Separate cowl pods and other vehicle lighting shown in installation photographs are not included.

The selectable configuration here is the White Combo complete kit. This page does not offer an Amber kit or a bracket-only package.
Use the factory mounting points
The brackets fit over the supplied spacers using the original hood-area mounting locations. The guide shows T40 bolt removal, low-profile lightbar bolts, and a relay harness powered from a fused battery connection. The factory auxiliary switch controls the relay; it does not supply the bar’s main current.
Open the illustrated JL hood-lightbar installation guide
Original manufacturer installation for the hood bracket and SS50 bar.
Warranty
This legacy SS50 kit is listed with an eight-year limited warranty, subject to the manufacturer’s terms. Read the manufacturer warranty
Plan the rest of your Wrangler lighting
Plan your Wrangler lighting
Compare complete kits, mounting parts and installation guides for your generation. Check each product’s original-equipment and trim requirements.
Compare Jeep Wrangler JK and JL lighting · Read the Wrangler lighting upgrade guide


























