BTS fog-light guide
Match your JL bumper, then choose the fog beam
Eighteen fixed-colour SS3 kits combine the correct Type M, MR or MS mounts with Sport, Pro or Max lamps.
Three bumper mounts, three distinct kits
| Factory bumper | Native choice | Mount |
|---|---|---|
| Sport plastic | Plastic (Sport) | Type MS |
| Sahara/Willys/Rubicon non-Sport plastic | Plastic (Non-Sport) | Type M |
| Rubicon factory steel | Steel | Type MR |
The current manufacturer application covers 2018–2026 Jeep Wrangler JL. Match the actual fog-light mount, not just the trim badge. For 2018, distinguish JL from JK; see the JK fog-light kit for the JK plastic-bumper application.
These are replacements for factory fog-light locations. Match the bumper, lamp mounting points and electrical connector before ordering. A vehicle without factory fog lights needs a separate mounting and wiring plan. Check clearance and compatibility with an aftermarket bumper.

Choose output level and fixed main-beam colour
Sport, Pro and Max use different output packages. Each native choice here is an SAE Fog pair, in fixed 6000K White or 3000K Yellow. All include the mounting parts and wire adapters for the selected bumper. The manufacturer lists 14.5W Sport, 36W Pro or 38.5W Max per pod; those figures are per lamp, not per pair.
The amber backlight is a separate accent function, not the White or Yellow road-lighting beam. Connect its lead only to a suitable fused 12V circuit, following the supplied wiring instructions. Do not connect the backlight lead directly to the battery.

| SKU | Mount | Level | Main beam |
|---|---|---|---|
| DD7044 | Plastic (Non-Sport) | Sport | White SAE Fog |
| DD7045 | Plastic (Non-Sport) | Sport | Yellow SAE Fog |
| DD7052 | Steel | Sport | White SAE Fog |
| DD7053 | Steel | Sport | Yellow SAE Fog |
| DD7047 | Plastic (Non-Sport) | Pro | White SAE Fog |
| DD7048 | Plastic (Non-Sport) | Pro | Yellow SAE Fog |
| DD7055 | Steel | Pro | White SAE Fog |
| DD7056 | Steel | Pro | Yellow SAE Fog |
| DD7049 | Plastic (Non-Sport) | Max | White SAE Fog |
| DD7058 | Steel | Max | Yellow SAE Fog |
| DD7057 | Steel | Max | White SAE Fog |
| DD7050 | Plastic (Non-Sport) | Max | Yellow SAE Fog |
| DD7060 | Plastic (Sport) | Sport | White SAE Fog |
| DD7061 | Plastic (Sport) | Sport | Yellow SAE Fog |
| DD7063 | Plastic (Sport) | Pro | White SAE Fog |
| DD7064 | Plastic (Sport) | Pro | Yellow SAE Fog |
| DD7065 | Plastic (Sport) | Max | White SAE Fog |
| DD7066 | Plastic (Sport) | Max | Yellow SAE Fog |
Want White and Yellow in the same lamps?
SmartSelect Dual Color kits are separate products: Type M non-Sport plastic, Type MR steel or Type MS Sport plastic. The fixed-colour choices above do not switch colours.
What comes with the selected kit
Each kit supplies two round SS3 lamps, the matching vehicle brackets and mounting hardware, wire adapters and backlight-tap wiring. Other lights visible in vehicle photos are separate.


Mount securely and aim the fog cutoff
Open the illustrated Type M, MR and MS fog installation guide
The guide separates Sport plastic-bumper removal from Type M/MR mounting. Aim on level ground, 25 feet from a wall, with the cutoff four inches below lamp-centre height.
Manufacturer warranty
SS3 lamps carry the manufacturer’s limited lifetime coverage, subject to its terms. Wiring and accessories have separate terms; commercial, industrial and fleet use is limited to eight years. Read the manufacturer warranty
More Jeep lighting
Plan your Wrangler lighting
Compare complete kits, mounting parts and installation guides for your generation. Check each product’s original-equipment and trim requirements.
Compare Jeep Wrangler JK and JL lighting · Read the Wrangler lighting upgrade guide









































