MORIMOTO XBG36 · 2014–2024 TOYOTA 4RUNNER
Four yellow pods. A grille built around them.
The XBG36 brings four Morimoto 2Banger pods into a replacement mesh grille, with bright amber backlighting by day and a dimmer marker-light glow after dark. Its two Wide and two Combo optics provide separate, switch-controlled auxiliary main beams for off-road use.

One complete grille kit for every 2014–2024 trim
Fits SR5, Limited, Nightshade, Trail, TRD Sport, TRD Off Road and TRD Pro. The included wiring accommodates the three factory-headlight configurations used across these years and works with Morimoto XB Evo headlights.
The mesh insert uses the original grille surround and factory mounting points. The smooth matte-black fascia cover can be left clean or fitted with the original Toyota emblem using suitable double-sided foam tape.
2020 models: check the original center-bracket and spacer arrangement before assembly; BTS can help confirm which hardware branch to follow.

Backlighting and main beams have different jobs
Amber signature lighting
The backlights use switched ignition power. They run brightly in the daytime and dim through the parking-light circuit when that circuit is active.
Yellow auxiliary main beams
Two NCS Wide pods add spread and two NCS Combo pods combine width with reach. Use the included push button or an upfitter-switch input to control them. The grille provides ±6° of pod adjustment.


What comes in the XBG36 box
- Mesh grille insert and smooth front fascia cover.
- Two backlit yellow NCS SAE Wide 2Banger pods and two backlit yellow NCS Combo 2Banger pods.
- Center-support bracket, four spacers and the installation hardware, including sixteen T20 pod screws.
- Side-marker harness, grille harness, two fuse-tap styles, extension and splitter.
- BAF000H dual-output relay harness, extension, push-button control and upfitter input.

The gallery also shows customer-style builds with roof, bumper, fog and headlight upgrades. Those additional lights are not part of this grille kit.
Plan the wiring before you fit the grille
The original manual gives a different backlight-power route for 2014–2018 and 2019–2024 vehicles. It also shows how the supplied splitter can share the switched feed with Morimoto XB headlight DRLs. The illustrated guide keeps those routes separate.
Install the grille with the correct wiring route
Follow the illustrated BTS guide for the grille hardware, both fuse-tap routes and complete wiring diagrams with stock or Morimoto XB Evo headlights.

Morimoto’s 4Runner XBG grille video.
Built for the front of a trail vehicle
The grille and painted fascia use ABS plastic. The pods combine powder-coated die-cast aluminum housings, polycarbonate lenses and stainless mounting hardware. Morimoto supplies a lifetime limited warranty.
Questions before ordering
Can I keep my factory headlights?
Yes. The included wiring supports the three original headlight configurations used on the 2014–2024 4Runner. The guide includes a complete stock-headlight wiring diagram.
Can I use this with Morimoto XB Evo headlights?
Yes. The supplied splitter can share the switched feed between the grille backlights and the headlight DRLs. Follow the separate XB Evo wiring diagram in the installation guide.
Are the yellow main beams the same as the amber backlights?
No. The amber backlights provide the bright daytime and dimmed marker-light appearance. The separate yellow main beams are controlled by the included button or your upfitter switch.
Is a headlight or roof-light kit included?
No. XBG36 includes the grille, its four 2Banger pods, fascia, hardware and wiring listed above. Other lighting shown on the demonstration vehicles is separate.
Explore 2014–2024 4Runner lighting upgrades · Read the 4Runner lighting buying guide






















