A modern rear-light signature for your 4Runner
A direct-fit LED tail-light pair for the 2010–2024 Toyota 4Runner. Choose a smoked or red inner-lens finish; both have a smoked outer lens, black housings, a white reverse light and selectable turn-signal animation.

Choose the finish
| Smoked — FL0105 | Smoked inner lenses for a darker appearance. |
|---|---|
| Red — FL0106 | Red inner lenses with the same smoked outer-lens treatment. |
| Included | One left and one right tail-light assembly. |
| Warranty | Two-year manufacturer warranty. |

Startup animation and turn signals
The C-shaped running light performs a chasing startup sequence followed by a slow pulse. The three inner turn-signal bars can operate sequentially or in a static pattern. Set the lamp’s connection points during installation, then test both sides before closing the trim.
The startup animation can be disabled by disconnecting its corresponding connector. Follow the marked connections on the lamp and the installation guide; do not alter the vehicle wiring.

Installation and video
The lamps use the factory mounting locations and harness. Retain the original mounting nuts and connect the supplied resistor as shown in the guide.
Before you order
Do the red and smoked options change the vehicle fitment?
No. FL0105 and FL0106 are the two lens-finish choices for the same 2010–2024 4Runner application.
Can I turn off the startup animation?
Yes. Disconnect the corresponding startup connector during installation. Test the running, turn, brake and reverse functions before replacing the access panels.



















