DIODE DYNAMICS · TOYOTA 4RUNNER
One or two SS30 bars behind the grille
Build a clean lower-grille lighting setup for the 2014–2019 4Runner with the correct bumper and factory mounting points.
Check your year and equipment
2014–2019 Toyota 4Runner, excluding Limited and Nightshade. This lower-grille SS30 kit is not the 2020–2024 upper-grille SS6 kit.

Choose the installed layout
One-bar and two-bar packages use the same application-specific mounting system. Bracket Only is for a customer supplying compatible lighting and wiring. Choose from the currently available combinations in the selector.

Driving versus Combo
Driving concentrates the beam ahead. The complete kits currently selectable here use White Driving. The manufacturer’s Combo illustration is also shown to help identify existing equipment; Combo is not an available selection on this page. These auxiliary beams do not replace correctly aimed factory low beams.

Complete kit or mounting brackets
- Complete package: one or two selected 30-inch lightbars, two 4Runner brackets, the matching single- or dual-output harness, switch adapter and mounting hardware.
- Bracket Only DD6759P: vehicle brackets and hardware, without the lightbars or harness.

Available configurations
| SKU | Configuration |
|---|---|
| DD6762 | White Driving / One 30″ Light Bar |
| DD6766 | White Driving / Two 30″ Light Bars |
| DD6759P | N/A / Bracket Only |
Warranty by component
Diode Dynamics currently lists this exact 4Runner SS30 kit with an eight-year limited manufacturer warranty. These established kit SKUs use the listed SS30 assemblies; they are not a promise of the newer Sport/Pro bar generation or its lifetime terms. Wiring and accessories have separate three-year coverage. Manufacturer eligibility and exclusions apply.
Manufacturer video
How to Install 2014-2019 5th Gen Toyota 4Runner Stealth Lightbar Kit | Diode Dynamics. Video loads only when selected.
Installation, illustrated
Open the 2014–2019 Toyota 4Runner SS30 stealth lightbar installation guide
Review the mounting, wiring and aiming steps before starting. The guide includes the original manufacturer technical photos and diagrams.
Questions before ordering
Does this fit a 2020–2024 4Runner?
No. This SS30 lower-grille kit is specified for 2014–2019, excluding Limited and Nightshade. Check the separate SS6 kit for its own year and trim limits.
Must the bumper come off?
Yes. The manufacturer procedure removes the bumper, fits the brackets and bars, checks clearance with the bumper loosely in place, then reinstalls it.
Does a two-bar photo mean both are included in every option?
No. Choose One 30-inch, Two 30-inch or Bracket Only. The SKU and selected package determine the quantity.
Plan the rest of your 4Runner lighting
Plan your 4Runner lighting
Compare this part with other supported applications and confirm original equipment before ordering.
Shop 2014–2024 4Runner lighting · Read the 4Runner buying guide




























