Why Choose Morimoto XB Type Z LED Fog Lights
Morimoto XB Type Z LED fog lights are complete replacement housings built to upgrade supported factory halogen Mazda fog lights. They deliver a controlled projector beam, clean white output, and a proper LED fog light setup without relying on basic bulb swaps.
Features include:
- Complete LED projector fog light housings
- Three Philips Luxeon-T LEDs per side
- 5500K white output
- Approximately 1,200 raw lumens per side
- Approximately 2,400 raw lumens total
- Plug-and-play harness included
- Integrated height adjusters
- DOT, SAE, and ECE listed compliance
- 10-year limited warranty
Key Features & Benefits
5500K White LED Output
Each Type Z fog light uses three Philips Luxeon-T LEDs to produce a crisp white beam.
Features include:
- 5500K color temperature
- Three Philips Luxeon-T LEDs per side
- Approximately 1,200 raw lumens per side
- Approximately 2,400 raw lumens total
- Clean modern LED appearance
This gives supported Mazda models a sharper front-end look with improved fog light performance.
Projector-Based Fog Beam
The XB Type Z fog lights use projector optics to control and distribute light properly.
Features include:
- Projector-based optical design
- Super-wide fog light beam
- Smooth light distribution
- Better control than LED bulbs in halogen housings
- Designed specifically for fog light use
This is a complete fog light housing upgrade, not just a replacement bulb.
Plug-and-Play Installation
These fog lights are designed to install into the factory fog light locations on compatible Mazda applications.
Features include:
- Plug-and-play harness included
- Uses factory connectors
- Fits stock mounting locations
- Required seals, pigtails, and connectors included
- Integrated height adjusters for aiming
Professional installation is recommended for proper fitment, wiring, and beam adjustment.
Performance, Compatibility & Use Case
Known Vehicle Compatibility
These Morimoto XB Type Z LED fog lights fit select Mazda applications, including Mazda RX-8 2004-2008, Mazda MX-5 2006-2015, Mazda MPV 2004-2006, Mazda CX-9 2013, Mazda CX-7 2007-2009, Mazda CX-5 2013-2015, Mazda MAZDASPEED6 2006-2007, Mazda 6 2006-2008 and 2011-2018, Mazda 5 2006-2010, Mazda 3 2004-2015 with round fogs, and Mazda 2 2010-2015.
OEM Replacement Part Numbers
These fog lights are listed to replace Mazda part numbers MA2593108 and MA2592108.
Always confirm fitment by vehicle year, trim, factory fog light style, and OEM part number before ordering.
Application & Use Case
Designed for:
- Mazda fog light upgrades
- Factory halogen fog light replacement
- White LED fog light conversions
- Complete projector fog light housing upgrades
- Daily-driven Mazda vehicles
- Drivers who want better beam control than a basic bulb swap
Installation & Technical Details
Installation Overview
Morimoto XB Type Z LED fog lights are designed to replace the original halogen fog light housings on supported Mazda models using factory-style mounting and wiring.
Installation details:
- Product type: Complete LED fog light housing set
- Output color: White
- Color temperature: 5500K
- LED type: Philips Luxeon-T
- LED count: 3 LEDs per side
- Output: Approximately 1,200 raw lumens per side
- Total output: Approximately 2,400 raw lumens
- Wiring: Plug-and-play harness included
- Aiming: Integrated height adjusters
- Optional accessory: Yellow Lamin-X Film Kit
Build Quality, Compliance & Warranty
Build Quality
Morimoto XB Type Z fog lights are built as complete replacement housings with durable exterior components.
Key details:
- Durable polycarbonate lens
- Powder-coated cast aluminum housing
- Housing doubles as LED heat sink
- Protected internal components
- Projector-based fog light optics
Compliance
These fog lights are listed as meeting:
- DOT standards
- SAE standards
- ECE standards
Proper installation and aiming are important for safe road use and compliance.
Warranty Coverage
This Morimoto product includes a 10-year limited warranty.
What’s Included
Included in the kit:
- 2 × Morimoto XB LED Type Z Fog Lights
- 1 × Plug-and-Play Harness
- Optional Yellow Lamin-X Film Kit, if selected
Frequently Asked Questions About Morimoto XB Type Z LED Fog Lights
Are these fog lights sold as a pair?
Yes. This kit includes one pair of Morimoto XB LED Type Z fog lights.
It includes both fog light housings for a complete left and right side upgrade.
What Mazda models do these fit?
These fog lights fit select Mazda RX-8, MX-5, MPV, CX-9, CX-7, CX-5, MAZDASPEED6, Mazda 6, Mazda 5, Mazda 3, and Mazda 2 applications.
Always confirm your year, trim, factory fog light style, and OEM part number before ordering.
Do these fit all Mazda 3 models?
No. Mazda 3 fitment is listed for 2004-2015 models with round fog lights.
Confirm your factory fog light shape before ordering.
Are these complete fog lights or just bulbs?
These are complete LED projector fog light housings.
They replace the supported factory fog light assemblies instead of simply installing LED bulbs into the original halogen housings.
What color is the output?
These Morimoto XB Type Z fog lights produce 5500K white output.
That gives them a crisp, modern LED appearance.
Are these plug-and-play?
Yes. These fog lights include a plug-and-play harness for supported applications.
They are designed to use factory-style connections and stock mounting locations.
What Mazda part numbers do these replace?
These fog lights are listed to replace Mazda part numbers MA2593108 and MA2592108.
Confirm the part number matches your factory fog light before ordering.
Are these DOT, SAE, and ECE compliant?
Yes. These Morimoto XB Type Z LED fog lights are listed as meeting DOT, SAE, and ECE standards.
Proper installation and aiming are still required.
What warranty is included?
This Morimoto product includes a 10-year limited warranty.
