United Pacific | 35887
5.75-inch round replacement lamp
A dedicated 5.75-inch LED lamp with white/amber position bars for a matching four-headlight arrangement.
White/amber position bars
Manufacturer-rated output: 1,000 lumens.
Match the beam function
Low beam. Choose the lamp for the circuit and position being replaced.
One lamp per order
This listing supplies one headlight, not a vehicle set. Confirm the quantity required for your installation.

Fitment & selection
Start with the lamp already installed
Compare the existing lamp marking, retaining hardware, rear clearance and circuit functions. A nominal size or model name alone does not confirm compatibility.
Use the exact low- or high-beam part in its intended position. The description mentions 12–24V while the specification table lists 12V; confirm the supplied version before a 24V installation.
Manufacturer-listed truck applications
These application entries still require the matching original lamp arrangement. Check any modified housings or wiring separately.
- 1958-1964 International Travelall
- 1961-1966 Kenworth W900
- 1957-1962 Mack N Series
- 1967-1987 Peterbilt 288
- 1954-1972 Peterbilt 341
- 1973-1987 Peterbilt 353
- 1967-1987 Peterbilt 358
Lamp details
Specifications for this exact part
| Part number | 35887 |
|---|---|
| Nominal size | 5.75-inch round |
| Main light type | LED |
| Beam function | Low beam |
| Supply | 12V DC confirmed; confirm 24V compatibility for the supplied version |
| Package | One lamp |
| Manufacturer-rated output | 1,000 lumens |
| Manufacturer standards listing | DOT/SAE; FMVSS 108. Match the application and aim the installed headlight. |
Installation resources
Check the correct connector and circuit
Identify the vehicle ground and beam circuits before connecting the lamp. Compare the connector orientation with the exact diagram where provided. Confirm rear clearance, secure the wiring and check every function and the final beam aim.
Product questions
Before you order
Are the low- and high-beam lamps interchangeable?
No. The two part numbers have different beam functions and pinout diagrams. Select the lamp for its actual position; a wiring adapter does not change the beam pattern.

















