Holley RetroBright
Four LED headlights for your Kenworth W900A
A complete four-light RetroBright kit for the matching 5.75-inch round sealed-beam arrangement on your Kenworth W900A. Each colour selection supplies two Hi/Lo lamps and two dedicated high-beam lamps.
Four lamps per kit
Order quantity one supplies all four lamps, with two of each beam function.
Two white colour choices
Classic White is 3000K; Modern White is 5700K. The colour choice keeps the same four-lamp layout.
Traditional sealed-beam appearance
The 5.75-inch round lens retains the original lamp format while the integrated source uses LED technology.

Kit contents
Choose Classic White or Modern White
| Classic White — 3000K | 2 × LFRB125 Hi/Lo lamps + 2 × LFRB126 high-beam-only lamps |
|---|---|
| Modern White — 5700K | 2 × LFRB145 Hi/Lo lamps + 2 × LFRB146 high-beam-only lamps |
The manufacturer’s single-lamp listings describe the individual components. This BTS kit contains four lamps in either colour configuration.
Fitment & construction
Check the installed lamps and wiring
Match the 5.75-inch round lamp opening, retaining hardware and available bucket clearance. This kit replaces the corresponding sealed-beam arrangement; it does not convert a different lamp shape or mounting system.
| Supply | 9–18V DC |
|---|---|
| Traffic pattern | Left-hand drive |
| Connection | H4; verify the vehicle’s low-beam, high-beam and ground pin positions |
| Housing / lens | Cast aluminium / polycarbonate |
| Service | Replaceable LED cartridges; match the exact lamp and colour |
| Manufacturer warranty | Limited two-year warranty on the component lamps, subject to Holley’s terms |
Installation
Keep each lamp on its intended circuit
Identify each vehicle circuit before installation, then follow the component instructions and the truck’s service procedure. Fit the two Hi/Lo lamps in the low-beam positions and the two high-beam-only lamps in their dedicated high-beam positions. Check all functions and final beam aim.
Holley’s 5.75-inch instructions cover harness checks and adapter or connector work for the LFRB125/LFRB145 Hi/Lo lamps. H4 connector shape alone does not establish matching pin positions; the separate high-beam circuit also needs to match its lamp.
Kit questions
Before you order
Does one kit contain two lights or four?
Four: two Hi/Lo lamps and two high-beam-only lamps. Order quantity one means one complete four-light kit.
Do all four lamps operate on low beam?
No. Two lamps provide Hi/Lo operation and two are dedicated high beams. A wiring adapter does not change the beam function of a lamp.
Which colour should I choose?
Choose 3000K Classic White for a warmer appearance or 5700K Modern White for a cooler white. Kelvin describes colour temperature, not brightness.
Will it fit a truck with different headlight housings?
Compare the actual lamp format, buckets and electrical connections. A W900 model name alone does not confirm a modified installation.
Related guides & replacements
Choose the matching lamp format
Individual replacement lamps are available for the Hi/Lo positions and dedicated high-beam positions. Match the function and colour to the lamp being replaced.
Video
RetroBright product video

























