The Morimoto LF559 XB Hybrid headlight pair replaces the listed 2010–2013 Toyota 4Runner assemblies with Bi-LED low/high beams and white DRLs while retaining the original halogen turn-signal bulbs.
Fitment and original equipment
- Toyota 4Runner: 2010–2013, with the original headlight connectors and turn-signal bulbs.
- H11 and 9005 are connection identifiers for this assembly installation, not an OEM bulb-size guide for other years or trims.
- Left-hand-drive beam pattern. Morimoto designed and tested these housings on US-spec vehicles. Confirm the actual lighting, connectors and DRL equipment on Canadian or other-market vehicles.
Before installation
Inspect the retained turn-signal bulbs and sockets, connect the original headlight plugs and install the separate supplied DRL power feed. Test the lighting functions and adjust beam aim after the assemblies are secured, especially if ride height has changed.
Specifications and contents
- HEADLIGHTS: 2x (One Pair) 10-13 Toyota 4Runner Morimoto XB Hybrid LED Headlights
- WIRING: Plug and Play Harness, Fuse Tap
- WARRANTY: 5 Years (Click For Details)
- TOYOTA 4RUNNER: 2010-2013
- REPLACES TOYOTA PART #: 8117035520, 8117035530, 81170-35520, 81170-35530
- COMPLIANCE: DOT, SAE, FMVSS108 STANDARDS
- NOTE: These housings have been designed for, and tested on, US-Spec vehicles. Other countries’ compatibility may vary and is not guaranteed nor always known.
- INTENSITY: 3,200lm (raw; each)
- TRAFFIC PATTERN: LHD Only
- INPUT: H11, 9005, Parking, DRL
- FUNCTIONS: DRL (White), Parking, Low, High
- BEZEL COLOR: Gloss / Matte Gunmetal Gray
- SIDEMARKER: Amber
- MATERIAL: ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens)
- OPTIC: Kuria Optic Bi-LED (3″)
- UV COATING: Momentive UVHC3000
Does Hybrid mean the low beam still uses a halogen bulb?
No. The low and high beams use the Bi-LED projector. The original halogen bulb is retained for the turn signal, which is the key mixed-technology feature of this assembly.
Does the 3,200-lumen rating describe the pair?
Morimoto specifies 3,200 raw lumens per headlight. This is a raw output rating, not a measured lux value at a particular point on the road.
Do the DRLs run through the normal headlight connectors alone?
No. The installation includes a separate supplied DRL cable and fuse-tap connection. Follow that power-feed procedure and test the DRLs independently of the main beams.
Is LF559 the correct assembly for a 2014 4Runner?
This part is listed for 2010–2013 4Runner. Do not carry that range into the later facelift; select the exact assembly for the vehicle year and equipment.
Do I need new LED turn-signal bulbs with this pair?
The intended installation reuses the original halogen turn-signal bulbs. Inspect their condition and sockets before transfer; changing to another bulb type is outside that original wiring arrangement.
Can I use the H11 and 9005 input listing as an OEM bulb guide?
Those identifiers describe connections for this complete replacement-headlight installation. For replacement bulbs in an original housing, use the vehicle’s OEM bulb guide and confirm the actual installed lamp.
What should be checked after installation?
Test DRL, parking, turn, low and high beams, then adjust final aim. Confirm Canadian-market connectors and DRL control because Morimoto states US-spec testing.
